Hi, does the early ford with AC filter use the std crossover tube ?
if there is a difference, does anyone have any pictures or information available please
regards Howard
army6x6@aol.com
G503.com Message Forums
Military Vehicles, WWII Jeeps and more!
Crossover Tube
Moderator: Moderator
7 posts
• Page 1 of 1
Crossover Tube
by Army6x6 » Fri Oct 31, 2008 3:34 pm
- Army6x6
- G-Corporal
- Posts: 16
- Joined: Sat Nov 15, 2003 4:47 pm
- Location: Cherry Valley, NY
by iron duck » Sat Nov 08, 2008 12:33 am
Howard, the AC pancake aircleaner used a cross overtube without tube for the active cranckase ventilation system.
It has a higher feet as the Tube must fit with the special airhorn from the pancacke aircleaner.
Luc
It has a higher feet as the Tube must fit with the special airhorn from the pancacke aircleaner.
Luc
- iron duck
- G-Major General
- Posts: 2781
- Joined: Sun Jan 23, 2005 11:07 pm
- Location: belgium
by Ron Fitzpatrick » Thu Feb 19, 2009 3:06 pm
working on the dies, should have a finished product in 2 months
Ron
Ron
Ron Fitzpatrick Jeep Parts
800-600-JEEP (5337) or 541-582-4035
http://www.g503.com/parts
I'm often the cheapest, I'm seldom the most expensive, but I always offer the best service.
800-600-JEEP (5337) or 541-582-4035
http://www.g503.com/parts
I'm often the cheapest, I'm seldom the most expensive, but I always offer the best service.
-
Ron Fitzpatrick - OWNER OF g503.com
- Posts: 2325
- Joined: Mon Apr 14, 1997 9:00 pm
- Location: Grants Pass, Oregon
by ajlang » Thu Feb 19, 2009 4:01 pm
Ron Fitzpatrick wrote:working on the dies, should have a finished product in 2 months
Ron
Ron - that's great news. Will it be just the bracket or both the bracket and the tube?
Thanks,
Andy
-
ajlang - Sergeant Major of the Gee
- Posts: 469
- Joined: Wed Jun 14, 2006 5:09 am
- Location: Newnan, GA
by Jon » Thu Feb 19, 2009 4:21 pm
Andy....
Both.....
Just been talking to Ron....
JR
Both.....
Just been talking to Ron....
JR
Jon Rogers
AUSTRALIA
http://jeepdraw.com JeepDraw Home Page & Drawings
Parts Colours Page http://jeepdraw.com/PART_COLOURS.htm
1944 GPW195611 20531384 ACM-2 17781
1942 MBT 19433W
AUSTRALIA
http://jeepdraw.com JeepDraw Home Page & Drawings
Parts Colours Page http://jeepdraw.com/PART_COLOURS.htm
1944 GPW195611 20531384 ACM-2 17781
1942 MBT 19433W
-
Jon - Australian Army (Retired) R.A.E.M.E.
- Posts: 10884
- Joined: Mon May 04, 1998 9:00 pm
- Location: Down Under In Queensland
crossover tube height
by steven ellis » Thu Feb 19, 2009 9:19 pm
My 2/42 gpw has the original filter, crossover tube. I don't understand why it looks as if the crossover tube is too high for the filter. Is this normal? They must have used a flex hose to connect the filter horn to the crossover tube looks to be 3/4 in height difference
GPW 106063 1-45 Allison Steel rebuild
GPW 227 DOD 2/42 2062315 (actual) & US NAVY 195086 hood numbers
MB124997 DOD 3/4/42 2079954 (actual) Slat grill
Looking for motor MB130xxx-132,xxx range
GPW48979 mtr for trade
M38 DOD 3/52 Hood# 20908270 actual
GPW 227 DOD 2/42 2062315 (actual) & US NAVY 195086 hood numbers
MB124997 DOD 3/4/42 2079954 (actual) Slat grill
Looking for motor MB130xxx-132,xxx range
GPW48979 mtr for trade
M38 DOD 3/52 Hood# 20908270 actual
-
steven ellis - Sergeant Major of the Gee
- Posts: 390
- Joined: Mon Oct 15, 2007 6:38 pm
- Location: Cokato Mn
7 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests