SLAT GRILL HOOD HINGE
-
- G-Colonel
- Posts: 1267
- Joined: Thu Mar 31, 2005 11:18 am
- Location: Buenos Aires, República Argentina
SLAT GRILL HOOD HINGE
Hi all,
ciould some body post or send me to iasasaguier@infovia.com.ar some detailed photos of slat's hood hinge ???
I found one OK, but in the hinge area was working Bubba !!
Cheers and tks in advance.
ChaSa
ciould some body post or send me to iasasaguier@infovia.com.ar some detailed photos of slat's hood hinge ???
I found one OK, but in the hinge area was working Bubba !!
Cheers and tks in advance.
ChaSa
Slat Grill #124991 - March 1942
CJ-2A #114467 - July 1947
Spen Model S 1948
CJ-2A #114467 - July 1947
Spen Model S 1948
-
- G-Colonel
- Posts: 1276
- Joined: Tue Jan 04, 2005 7:14 pm
- Location: Allentown, PA
This is what the hinge looks like. The part with the four large holes is spot welded to the hood and then the hat channels are spot welded on top.
EX-MVPA #28445
41 Willys MB I0II93 slat grill
the "Phoenix"--rising out of the ashes...
Welbike Parascooter Mark I #798
BSA Folding Para Bicycle R38199
"For those who fought for it...Freedom has a taste the protected will never know"
41 Willys MB I0II93 slat grill
the "Phoenix"--rising out of the ashes...
Welbike Parascooter Mark I #798
BSA Folding Para Bicycle R38199
"For those who fought for it...Freedom has a taste the protected will never know"
-
- G-Colonel
- Posts: 1267
- Joined: Thu Mar 31, 2005 11:18 am
- Location: Buenos Aires, República Argentina
slat grill hood hing
Mike,
many thanks for your reply and photo. I never saw an original hood hinge before.Tks !
Sorry I disturb you again, but do you have a photo of the hinge already put on the hood ?
I saw one, but I can't remember where, a photo of the hinge with a small steel suplement. This is what I need to show to the paint shop guy to copy.
Tks again in advance for your help.
ChaSa
many thanks for your reply and photo. I never saw an original hood hinge before.Tks !
Sorry I disturb you again, but do you have a photo of the hinge already put on the hood ?
I saw one, but I can't remember where, a photo of the hinge with a small steel suplement. This is what I need to show to the paint shop guy to copy.
Tks again in advance for your help.
ChaSa
Slat Grill #124991 - March 1942
CJ-2A #114467 - July 1947
Spen Model S 1948
CJ-2A #114467 - July 1947
Spen Model S 1948
- Jim Kilbourne
- G-Colonel
- Posts: 1860
- Joined: Sat Dec 14, 2002 7:38 am
- Location: Staunton, VA, USA
- Contact:
Hood Hinge
Charlie.
Here is a pic of how it goes...hinge first, right and left channel pieces next and the reinforcement on top, centered over the channel seam
Here is a pic of how it goes...hinge first, right and left channel pieces next and the reinforcement on top, centered over the channel seam
Jim Kilbourne
I COLLECT WILLYS MB NUMBERS! Please send me your Frame, Engine, Body, Hood numbers and DOD. Thanks!
WANTED: MB unrestored, used, OD paint, dash panel light housings
I COLLECT WILLYS MB NUMBERS! Please send me your Frame, Engine, Body, Hood numbers and DOD. Thanks!
WANTED: MB unrestored, used, OD paint, dash panel light housings
-
- G-Colonel
- Posts: 1267
- Joined: Thu Mar 31, 2005 11:18 am
- Location: Buenos Aires, República Argentina
HOOD HINGE
Jim,
many thanks for the photo !!
Couldn't be better !!! The reinforcement part was my doubt !!
Tks again.
Charlie
many thanks for the photo !!
Couldn't be better !!! The reinforcement part was my doubt !!
Tks again.
Charlie
Slat Grill #124991 - March 1942
CJ-2A #114467 - July 1947
Spen Model S 1948
CJ-2A #114467 - July 1947
Spen Model S 1948
- marc belanger
- G-Sergeant Major
- Posts: 192
- Joined: Wed Nov 23, 2005 1:56 pm
- Location: Longueuil, Quebec, Canada
Hood hinge-where to buy
Hi collectors.
Did anyone know where to buy an original / repro hood hinge for the slat?
Thank's.
Marc
Did anyone know where to buy an original / repro hood hinge for the slat?
Thank's.
Marc
-
- G-Colonel
- Posts: 1276
- Joined: Tue Jan 04, 2005 7:14 pm
- Location: Allentown, PA
Hi Marc,
I asked the same question a few months ago and never received any replies. I only ever saw one original hinge for sale and that was on ebay and it went for some ridiculously high price for a hinge, however if you need one bad enough, I quess you would pay the price. There are no repros made that I am aware of. The only repro hood hinge made is one for the late war/early Cj type hinge(not what you need). You can get a NOS one of these on ebay(or .), but like I said it is not what you ar looking for. What I am doing is looking for a beat-up, ratty nasty hood that has a good hinge and I will take the hinge from that. Dont know if I will ever come across one of these, but that is the plan.
I asked the same question a few months ago and never received any replies. I only ever saw one original hinge for sale and that was on ebay and it went for some ridiculously high price for a hinge, however if you need one bad enough, I quess you would pay the price. There are no repros made that I am aware of. The only repro hood hinge made is one for the late war/early Cj type hinge(not what you need). You can get a NOS one of these on ebay(or .), but like I said it is not what you ar looking for. What I am doing is looking for a beat-up, ratty nasty hood that has a good hinge and I will take the hinge from that. Dont know if I will ever come across one of these, but that is the plan.
EX-MVPA #28445
41 Willys MB I0II93 slat grill
the "Phoenix"--rising out of the ashes...
Welbike Parascooter Mark I #798
BSA Folding Para Bicycle R38199
"For those who fought for it...Freedom has a taste the protected will never know"
41 Willys MB I0II93 slat grill
the "Phoenix"--rising out of the ashes...
Welbike Parascooter Mark I #798
BSA Folding Para Bicycle R38199
"For those who fought for it...Freedom has a taste the protected will never know"
-
- Sergeant Major of the Gee
- Posts: 338
- Joined: Thu Dec 19, 2002 9:59 am
- Location: Switzerland
Marc,
http://www.jeepest.com/
does sell NOS WOF hood hinges.
Check "ailes et capot MB"
These hood hinges do look similar to the hinges in Jim Kilbourne's picture,
but the small part has 6 flaps interacting with 7 flaps on the big part.
http://www.jeepest.com/
does sell NOS WOF hood hinges.
Check "ailes et capot MB"
These hood hinges do look similar to the hinges in Jim Kilbourne's picture,
but the small part has 6 flaps interacting with 7 flaps on the big part.
Alexandra
- David
- G-Colonel
- Posts: 1968
- Joined: Tue Dec 17, 2002 5:43 am
- Location: The Netherlands
Eagle also advertises NOS MB hinges for €20.00. I don't know if they are also correct for a slatgrill.
http://cms...nl/onderdelen ... 79&rid=188
Greetz
David
http://cms...nl/onderdelen ... 79&rid=188
Greetz
David
Willys MB II0247, body# 13772, d.o.d. 8/1/42
- Chris Fourroux
- G-Colonel
- Posts: 1218
- Joined: Wed Nov 05, 2003 8:34 am
- Location: Spirit Lake ID. USA
Hi guys,
I just wanted to point out that none of the above photos seem to show a correct hood hinge for a slat grill.
It's true the number of tabs for a slat grill hood hinge should be 9.
But the first and last tab are only slightly shorter than the middle 7.
The photos above show the 1st and 2nd as really short, then the next one is really long. with the middle 5 being the same length.
I just wanted to point out that none of the above photos seem to show a correct hood hinge for a slat grill.
It's true the number of tabs for a slat grill hood hinge should be 9.
But the first and last tab are only slightly shorter than the middle 7.
The photos above show the 1st and 2nd as really short, then the next one is really long. with the middle 5 being the same length.
Chris Fourroux
-
- Sergeant Major of the Gee
- Posts: 318
- Joined: Thu Feb 17, 2005 12:26 am
- Location: Reidsville NC
I am in the process of restoring my hood right now. It is a early hood with airdeflector and black primer and it has the same hinge as in the photos.
I checked my other hoods "1 early ford script hood with dimples for airdeflector bolts holes but were never drilled, 1 43 mb hood, and 2 44 mb hoods and they all have 11 loops on the hinge so i would assume the 9 loop in the photo is correct for slat grill.
I checked my other hoods "1 early ford script hood with dimples for airdeflector bolts holes but were never drilled, 1 43 mb hood, and 2 44 mb hoods and they all have 11 loops on the hinge so i would assume the 9 loop in the photo is correct for slat grill.
- Chris Fourroux
- G-Colonel
- Posts: 1218
- Joined: Wed Nov 05, 2003 8:34 am
- Location: Spirit Lake ID. USA
All period photos of slat grills I have seen (that actually show the hinge)
Show a 9 tab hinge with the center 7 tabs all being the same length, and the two outside tabs being slightly shorter.
You can see this in several photos in Farleys book.
I have modern photos of 5 different slat grills with this hinge.
Two of which I own.
The measurements are:
The 7 in the middle are 1 23/32"
The two on the ends are 1 7/16"
All Ford GPW hinges are 11 tabs. ( I'm not a GPW guy so if you know different speak up)
When the Willys MB changed to the ACM type II body in late 1943, the ford style 11 tab hinge was used.
The hinge on my 47 CJ-2A is also an 11 tab hinge.
The only period photograph using the above hinge that I have seen,
(9 tabs, middle 5 same length, outside 2 real short, next tab in real long)
was an early 1943 MB.
It should be noted that this '43 MB still had the type II air deflector installed. (type I air deflector was only for low windshield slats)
There is a modern photo using this hinge in AAW volume II. page 229.
it is a willys style hood. It is not mentioned what year this is but it's obviously not a slat grill.
But no, this isn't the end of the story.
there is also a 15 tab hinge out there. and I have no idea where it came from. I have one which was an obvious replacement, and I saw one on someone else’s jeep.
Show a 9 tab hinge with the center 7 tabs all being the same length, and the two outside tabs being slightly shorter.
You can see this in several photos in Farleys book.
I have modern photos of 5 different slat grills with this hinge.
Two of which I own.
The measurements are:
The 7 in the middle are 1 23/32"
The two on the ends are 1 7/16"
All Ford GPW hinges are 11 tabs. ( I'm not a GPW guy so if you know different speak up)
When the Willys MB changed to the ACM type II body in late 1943, the ford style 11 tab hinge was used.
The hinge on my 47 CJ-2A is also an 11 tab hinge.
The only period photograph using the above hinge that I have seen,
(9 tabs, middle 5 same length, outside 2 real short, next tab in real long)
was an early 1943 MB.
It should be noted that this '43 MB still had the type II air deflector installed. (type I air deflector was only for low windshield slats)
There is a modern photo using this hinge in AAW volume II. page 229.
it is a willys style hood. It is not mentioned what year this is but it's obviously not a slat grill.
But no, this isn't the end of the story.
there is also a 15 tab hinge out there. and I have no idea where it came from. I have one which was an obvious replacement, and I saw one on someone else’s jeep.
Chris Fourroux
- Bill Eldred
- G-Lieutenant General
- Posts: 5948
- Joined: Mon Dec 16, 2002 12:48 pm
- Location: Jeep Heaven
- Contact:
Chris both of the hinges on my Slat hoods show exactly what you describe. One of the hoods had an late early hood number. So I know that this one is for sure a slat grill hood. They both have type 2 deflectors.
42 MB123366 USA 2078369 est.
Need a hood number for my Slat.
USAF Foward Air Combat Controller
Lebanon, Libya, Grenada, Panama, DS1
Need a hood number for my Slat.
USAF Foward Air Combat Controller
Lebanon, Libya, Grenada, Panama, DS1
Who is online
Users browsing this forum: No registered users and 37 guests