2017 flea
- lt.luke
- G-General
- Posts: 9899
- Joined: Fri May 09, 2003 7:56 am
- Location: Oklahoma
- Contact:
Re: 2017 flea
Welcome to the fold!
Luke Sparks
MAJ (R), USA
GPW 12078 http://g503.com/forums/viewtopic.php?f=95&t=102532
https://www.homesteadersfinest.com/
MAJ (R), USA
GPW 12078 http://g503.com/forums/viewtopic.php?f=95&t=102532
https://www.homesteadersfinest.com/
- gpw_42
- Sergeant Major of the Gee
- Posts: 399
- Joined: Sun Nov 22, 2009 4:18 pm
- Location:
Re: 2017 flea
Best of luck hunting one down, maddawg! Be forewarned, there's a TON to learn, and it's SOOOO easy to misstep when things are cheap...it's addictive, for sure, but well worth the time invested to research before starting "did I get it right?"...seems if I'm doing 50/50, I'm happy.maddawg308 wrote:You guys aren't helping my addiction! I just went through all the pages of stuff you guys have saved, and now I have the bug to hit the flea market this weekend and see if I can save any WWII-era tools to build a GMTK of my own!
So, off to the flea market to try finding some historical gold!
Steve
- mudbox
- G-Colonel
- Posts: 1526
- Joined: Wed Oct 27, 2010 3:09 pm
- Location:
Re: 2017 flea
Slow day at the flea with not too many vendors. I ended up digging through some 5 gallon buckets of sockets and other drive tools to come away with most of what I brought home. I really dislike digging through buckets full of sockets... at least separate them by drive size people!
Anyway, a bunch of Plomb; sockets, 1/2" extension, 3/8" extension, and 3/4" drive sliding T (massive!)
1/2" drive regular sockets are a mix of brands, Williams, D-I, Walden, Bonney, Herbrand, Craftsman BE
Wartime Bonney offset DBE 3/4" and 5/8" T dated.
Deep sockets are a mix as well, SELECT STEEL (never seen them outside of wrenches before); Duro Chrome, D-I, Walden
Bonney universal, OTC extension
3/8" Husky sockets, 1/4" Cornwell sliding T, RTEC socket!, Plomb WF
Plomb:
1/2" shallow:
1/2" deep:
others:
-Jason
Anyway, a bunch of Plomb; sockets, 1/2" extension, 3/8" extension, and 3/4" drive sliding T (massive!)
1/2" drive regular sockets are a mix of brands, Williams, D-I, Walden, Bonney, Herbrand, Craftsman BE
Wartime Bonney offset DBE 3/4" and 5/8" T dated.
Deep sockets are a mix as well, SELECT STEEL (never seen them outside of wrenches before); Duro Chrome, D-I, Walden
Bonney universal, OTC extension
3/8" Husky sockets, 1/4" Cornwell sliding T, RTEC socket!, Plomb WF
Plomb:
1/2" shallow:
1/2" deep:
others:
-Jason
- d42jeep
- G-Brigadier General
- Posts: 2290
- Joined: Tue Feb 25, 2014 4:06 pm
- Location: Albany/Fallen Leaf Lake, CA
- Contact:
Re: 2017 flea
Even though that is a great haul, I can't believe that you didn't mention the size of the ultra rare 1-1/16" D-I socket. Those things are like hens teeth! Great find!
-Don
-Don
Ford GPW 76344 DOD 11/42 Built in Richmond, CA
-
- G-Major
- Posts: 832
- Joined: Sun Dec 20, 2009 9:35 pm
- Location:
Re: 2017 flea
hello
if the DI 1 1/16 is for sale I like to buy it if all possible
thank you
frenchman
if the DI 1 1/16 is for sale I like to buy it if all possible
thank you
frenchman
- mudbox
- G-Colonel
- Posts: 1526
- Joined: Wed Oct 27, 2010 3:09 pm
- Location:
Re: 2017 flea
I know! First one I've found in the wild.d42jeep wrote:Even though that is a great haul, I can't believe that you didn't mention the size of the ultra rare 1-1/16" D-I socket. Those things are like hens teeth! Great find!
I suppose so. Are you missing any other sizes?frenchman wrote:hello
if the DI 1 1/16 is for sale I like to buy it if all possible
thank you
Shipping would likely make it more expensive than it's worth, but I'm willing if you are.
-Jason
-
- G-Major
- Posts: 832
- Joined: Sun Dec 20, 2009 9:35 pm
- Location:
Re: 2017 flea
hi jay
PM sent thank you
frenchman
PM sent thank you
frenchman
- mudbox
- G-Colonel
- Posts: 1526
- Joined: Wed Oct 27, 2010 3:09 pm
- Location:
Re: 2017 flea
Too busy to go to the flea this weekend... but I told the wife I was going to 'run out for coffee'
Came back with a few extra passengers.
Hamilton marked M5 chest
Palmer TL-13A pliers
Lectrolite short DBE in 5/8" x 3/4"
Funky offset Vlchek wrench marked "VLCHEK" Cleaveland 56. Anyone know what this was for?
-Jason
Came back with a few extra passengers.
Hamilton marked M5 chest
Palmer TL-13A pliers
Lectrolite short DBE in 5/8" x 3/4"
Funky offset Vlchek wrench marked "VLCHEK" Cleaveland 56. Anyone know what this was for?
-Jason
- Wingnutt
- G-Lieutenant General
- Posts: 5029
- Joined: Mon Oct 24, 2011 1:17 pm
- Location:
Re: 2017 flea
That's a nice score on the M-5 chest. They even painted the leather handle!
TEMPORARY DUTY
- mudbox
- G-Colonel
- Posts: 1526
- Joined: Wed Oct 27, 2010 3:09 pm
- Location:
Re: 2017 flea
Thanks Greg. This makes the second one I've picked up, but for $5, I couldn't leave it behind. Pity about the paint on the handle, but at least the leather handle is still in good shape.Wingnutt wrote:That's a nice score on the M-5 chest. They even painted the leather handle!
Small take of wartime tools from this weekend.
Stanley #3 Philips
<H> NonTwist 5-1/2" cabinet tip
5/8 & 3/4" short offset DBE Jos Shaw Co
7/16 & 3/8" short offset Chrome Alloy # 19723. Don't know who made this one, but looks Williams to me with the round shank.
Duro-Indestro side cutters. Don't know the vintage, and probably post war, but neat...
Myriad of sockets includes Plomb and WF varieties, Craftsman BE, Wright, and wartime looking Thorsen
Billings M-1725 DOE.
-Jason
- Wingnutt
- G-Lieutenant General
- Posts: 5029
- Joined: Mon Oct 24, 2011 1:17 pm
- Location:
Re: 2017 flea
Despite the heavy implication of the meaning of the "-D-I-" marking, I think that's the first time I have ever seen the full term "DURO-INDESTRO" on anything, including literature (catalogs or ads, etc). Remarkable that it turns up embossed on a tool.
TEMPORARY DUTY
- mudbox
- G-Colonel
- Posts: 1526
- Joined: Wed Oct 27, 2010 3:09 pm
- Location:
Re: 2017 flea
I think I read somewhere that the co-branding was happening somewhere towards the end for Duro Metal Products.
This is from Alloy Artifacts:
'Duro and Indestro continued to prosper during the 1940s and '50s, but by the 1960s appeared to be losing ground to other competitors. Sometime during the '60s the Indestro operations were formally merged into Duro Metal Products, and the tools began appearing with dual brands "Duro-Indestro". The tool lines were "harmonized", which unfortunately meant that some of the special higher-end features of the Duro-Chrome tools were dropped. The company continued operating through the 1970s and 1980s, and was finally closed in 1990.'
So, probably 60's or newer.
-Jason
This is from Alloy Artifacts:
'Duro and Indestro continued to prosper during the 1940s and '50s, but by the 1960s appeared to be losing ground to other competitors. Sometime during the '60s the Indestro operations were formally merged into Duro Metal Products, and the tools began appearing with dual brands "Duro-Indestro". The tool lines were "harmonized", which unfortunately meant that some of the special higher-end features of the Duro-Chrome tools were dropped. The company continued operating through the 1970s and 1980s, and was finally closed in 1990.'
So, probably 60's or newer.
-Jason
-
- G-Sergeant Major
- Posts: 194
- Joined: Thu Jul 21, 2016 1:19 am
- Location:
Re: 2017 flea
Interesting trivia on Duro/Indestro........Everyone is surely by now familiar with the names Odlum and McNaught when it comes to Duro. Gertude was married to Mcnaught from before the company founding in 1917 until he passed away in 1942. She later turned around and married his partner, Mr. Odlum and outlived him as well. She ended up running the company until it was finally dissolved in 1990. She passed at 96 years old in 1992.mudbox wrote:I think I read somewhere that the co-branding was happening somewhere towards the end for Duro Metal Products.
This is from Alloy Artifacts:
'Duro and Indestro continued to prosper during the 1940s and '50s, but by the 1960s appeared to be losing ground to other competitors. Sometime during the '60s the Indestro operations were formally merged into Duro Metal Products, and the tools began appearing with dual brands "Duro-Indestro". The tool lines were "harmonized", which unfortunately meant that some of the special higher-end features of the Duro-Chrome tools were dropped. The company continued operating through the 1970s and 1980s, and was finally closed in 1990.'
So, probably 60's or newer.
-Jason
- mudbox
- G-Colonel
- Posts: 1526
- Joined: Wed Oct 27, 2010 3:09 pm
- Location:
Re: 2017 flea
Neat piece of history, Todd. Thanks for sharing.
Here's my small take from the weekend flea.
Herbrand tire spoon
matchbox car
spec correct, but unbranded stubby driver
Barcalo 1731-B
U.S. marked Yale lock
Bonney socket
Bonney DBE
Oh, and I found this really cool U.S.A.A.F. B-4 pilot's garment bag. In pretty nice shape. If someone wants it for their collection, send me a PM.
-Jason
Here's my small take from the weekend flea.
Herbrand tire spoon
matchbox car
spec correct, but unbranded stubby driver
Barcalo 1731-B
U.S. marked Yale lock
Bonney socket
Bonney DBE
Oh, and I found this really cool U.S.A.A.F. B-4 pilot's garment bag. In pretty nice shape. If someone wants it for their collection, send me a PM.
-Jason
- mudbox
- G-Colonel
- Posts: 1526
- Joined: Wed Oct 27, 2010 3:09 pm
- Location:
Re: 2017 flea
Made it to the flea today after missing the last few weeks. Brought home a few goodies.
Partial Husky 3/8" drive socket set
Winchester branded putty knife
New Britain deep socket
DI, None Better, Wright, and Bonney1/2" drive sockets
Plomb WF 3/8" drive swivel socket
Williams 723 DOE
Brown and Sharp Twist Drill & Machine Screw Tap Gage
'45 dated Nesco fuel can. With some fuel still in it...
And post war, but this awesome vintage Huot machinist box followed me home as well. Still has the original key!
Not the best pic, but but the engraving on the putty knife reads
WINCHESTER
Trade Mark
Made in U.S.A.
2364 (I think)
-Jason
Partial Husky 3/8" drive socket set
Winchester branded putty knife
New Britain deep socket
DI, None Better, Wright, and Bonney1/2" drive sockets
Plomb WF 3/8" drive swivel socket
Williams 723 DOE
Brown and Sharp Twist Drill & Machine Screw Tap Gage
'45 dated Nesco fuel can. With some fuel still in it...
And post war, but this awesome vintage Huot machinist box followed me home as well. Still has the original key!
Not the best pic, but but the engraving on the putty knife reads
WINCHESTER
Trade Mark
Made in U.S.A.
2364 (I think)
-Jason
Who is online
Users browsing this forum: pgcf and 33 guests