Master cylinder upgrade

[major519]

Tried doing a search and no luck here.
I am interested in doing an upgrade of my master cylinder from the single stage to a double stage setup.
I was wondering if anyone has any suggestions.
1970 M38A1CDN3

[artificer]

I put on a dual Isuzu 25mm with remote fill that works wonderfully well.
Some very minor mods, no frame damage or cutting. Bracket manufacture that is a pretty tight fit & all parts except blue hose from reservoir to master cylinder were salvage from an Isuzu pickup (m/c) & L200 Mitsubishi (reservoir).
Parallax error makes things look closer than they actually are an there are enough clearances & it is pretty hard to get good shots.

[Eagle Lake 53' M38A1]

artificer, what year Isuzu did your M/C come off of? I looked at some mid 90's P/U's and the lines came off the other side. Thanks

[artificer]

Late 80's to mid 90's just before they changed to the compact type m/c....did have booster but this is not needed for the jeep application just find a dust boot which fits properly.

[Mike C]

Herm the Overdrive Guy has kit to put the 67-71 CJ5 master on an earlier vehicle. Contemplating this mod for my A1 as well.

[iceman7273]

Kaiser willys sells a dual master cylinder bolt in kit.

http://www.kaiserwillys.com/product/293 ... conversion