Battery Compartment Fittings, Mounts

[AdnanRana]

People, i need help with two issues, i will post them separately:
Help required with next issue:
2. I need pictures of the battery compartment, ie how it is supposed to look in its original state. I dont have any mounts or fittings to secure the 2 batts.
- Please provide pictures of what it should look like and if possible, parts list.

(Sorry i had repeated the text from another post, under this heading erroneously, same has been corrected)

[brooksta13]

I’ve herd of people putting either small rocks or ball bearings with a little oil and shaking the tank to knock all the rust loose, then dump the rocks/ ball bearings and rust out, put about a qt of gas in and shake that to dissolve the oil, dump that. Then you can either install and fill the tank, and keep it full so no new rust will develop or you can treat the tank with this stuff called “Cream Coat.” I’ve used it on an old Harley tank for a sporty I had a wile back. It’s a two step process. Fist step etches the metal inside the tank. The second puts a Teflon like coating in the tank. Just follow the directions on the kit, it’s pretty easy. You should be able to pick it up at a bike shop, probably not a Harley dealer, more like a custom shop.

[AdnanRana]

Thanks for the advice buddy, this is what i have heard too.
- My issue is the kit, could you tell me what its called, a brand name, a link to the product page anything which will help me find it.

[svramselaar]

below the holding bolds
http://cgi.ebay.com/ebaymotors/M151-MUT ... 2567f096b5
below the tray where the batts are standing on
http://cgi.ebay.com/ebaymotors/1-M151-B ... 439d91f066
below the holding trays i think they are the same as m151
http://cgi.ebay.com/ebaymotors/Two-Mili ... 45fc5909db

not the best picture i found on the net
http://www.surfacezero.com/g503/data/500/S6300324.JP

below how the cable`s are on the battery`s
http://www.surfacezero.com/g503/data/50 ... -order.JPG

george

[AdnanRana]

Thanks a bunch, that helped me get the picture, i was lost as to what to look for.

Will update when found and installed.

[brooksta13]

Sorry it took so long to get back to you. Just got done with the re-fi paperwork for the house.
Any way here the link http://www.kreem.com/fueltankliner.html
I did a 5 gal tank with one qt. 17 gal fuel tank on you M151 will take 3 gts, you might get away with two.

[AdnanRana]

Thanks for the link, will try to get some asap. PS besta luck with the re-fi, hope it works out, credit just seems to eat away on ones pocket, hope they improved the terms on your line.