Where to get a 12 Volt starter ?
-
- G-Civilian
- Posts: 1
- Joined: Mon Apr 27, 2015 6:00 pm
- Location:
Where to get a 12 Volt starter ?
Where can I buy a 12 volt starter for my M151 ? Or do I get my starter rewound to 12 volts ?
- muttguru
- G-Colonel
- Posts: 1698
- Joined: Fri Jul 18, 2003 11:46 am
- Location: Lil' ol' England
- Contact:
Re: Where to get a 12 Volt starter ?
Frost, in all the years I've been researching M151s, I have yet to come across a 12volt version of the starter. That doesn't mean they don't exist, but someone out there has probably had a 24v unit rewound.TFrost wrote:Where can I buy a 12 volt starter for my M151 ? Or do I get my starter rewound to 12 volts ?
As there ae still lots of M151 parts for sale, you need to ask yourself why would you spend on a rewind instead of keeping the vehicle stock 24 volt? There's a tipping point at which it is cheaper to keep the vehicle 24volt rather than go to 12volt.
Ken
Contact address - muttguru@aol.com
Always wanted - Details and pictures of M416 Trailer data plates & M151 data plates & body-tags for my research. Thanks!
Always wanted - Details and pictures of M416 Trailer data plates & M151 data plates & body-tags for my research. Thanks!
-
- G-Sergeant
- Posts: 49
- Joined: Thu Feb 24, 2011 5:21 pm
- Location: north Alabama
Re: Where to get a 12 Volt starter ?
I have a prestolite 12 volt starter on my M151 engine. Conversion was done to accommodate the 12 volt system of my CJ that the M151 drive train is in. I don't know where it came from, but they do exist.
Scott
Scott
Jeep: I may get lost, but I won't get stuck.
- muttguru
- G-Colonel
- Posts: 1698
- Joined: Fri Jul 18, 2003 11:46 am
- Location: Lil' ol' England
- Contact:
Re: Where to get a 12 Volt starter ?
Hello Scott,deputyvaughn wrote:I have a prestolite 12 volt starter on my M151 engine. Conversion was done to accommodate the 12 volt system of my CJ that the M151 drive train is in. I don't know where it came from, but they do exist. Scott
that proves the old mutt saying...."Never say Never". Does your 12v starter still have its dataplate? Is there any information about the rewiring? Or does it give a model number? It is possible that somewhere out there, there was a military 12volt application that used this starter. Thanks....
Ken
Contact address - muttguru@aol.com
Always wanted - Details and pictures of M416 Trailer data plates & M151 data plates & body-tags for my research. Thanks!
Always wanted - Details and pictures of M416 Trailer data plates & M151 data plates & body-tags for my research. Thanks!
-
- Jeep Heaven
- Posts: 49841
- Joined: Sun Mar 02, 2008 12:37 pm
- Location: Proving Ground
Re: Where to get a 12 Volt starter ?
And I have NOS 12 Volt Distributors for same. Hawk Missile Loader used a Mutt Engine, but I think it was still 24V. And the Army may have had a welder or Generator with 12 V Mutt system.
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
-
- G-Sergeant
- Posts: 49
- Joined: Thu Feb 24, 2011 5:21 pm
- Location: north Alabama
Re: Where to get a 12 Volt starter ?
This thread id from the g838 site from when I bought my 12 volt starter. Maybe the seller can still get them or help you contact someone who does.
http://www.g838.org/viewtopic.php?f=11&t=4579
Scott
http://www.g838.org/viewtopic.php?f=11&t=4579
Scott
Jeep: I may get lost, but I won't get stuck.
-
- Sergeant Major of the Gee
- Posts: 268
- Joined: Fri Apr 20, 2007 3:26 am
- Location: Lucas, TX
Re: Where to get a 12 Volt starter ?
I have good tested used 24v starters, $45 + shipping
45 Chevy G7107 SOLD
45 MB Completed SOLD
48 CJ 2A Parts or maybe restore?
M151A2 1973 Completed and being driven.
M151A1/A2 Conversion to A2 Future Project
M37B1 1962 Restoration in progress
45 MB Completed SOLD
48 CJ 2A Parts or maybe restore?
M151A2 1973 Completed and being driven.
M151A1/A2 Conversion to A2 Future Project
M37B1 1962 Restoration in progress
- acudanut
- USMC GUNNY
- Posts: 366
- Joined: Sat Feb 19, 2011 5:47 am
- Location: Land of OZ, KANSAS
Re: Where to get a 12 Volt starter ?
I would like to rewire my entire Mutt to 12V. Painless wiring ? anyone done this ?
-
- G-Lieutenant General
- Posts: 5913
- Joined: Sun Mar 19, 2006 10:04 am
- Location: Pemberton, New Jersey
Re: Where to get a 12 Volt starter ?
No need to rewire, just change the bulbs and gauges and starter and alternator and change to point type ignition. The starter and coil are the main problem. I know there are people running a 24 volt coil on 12 volts and it is working, I have not had time to try it myself to verify. he issue may be that as voltage decreases the amperage increases for a set load. This may or may not overheat the coil. The way I see around that is to change to a CD ignition system like a MSD setup.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
- acudanut
- USMC GUNNY
- Posts: 366
- Joined: Sat Feb 19, 2011 5:47 am
- Location: Land of OZ, KANSAS
Re: Where to get a 12 Volt starter ?
No lights or anything work on my M 151 anyway (except a couple gauges). eeerrrr
-
- G-Lieutenant General
- Posts: 5913
- Joined: Sun Mar 19, 2006 10:04 am
- Location: Pemberton, New Jersey
Re: Where to get a 12 Volt starter ?
Well if you are asking about a new wiring harness for the vehicle you can buy NOS wiring harness's for an A2 for decent prices from most of the surplus dealers. That would be the best way to go since it is all there and numbered. Is your harness bad or just the bulbs? Converting completely to 12 volt can be done but it will probably cost more than getting the 24 volt system working unless you are missing all of the components.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
- acudanut
- USMC GUNNY
- Posts: 366
- Joined: Sat Feb 19, 2011 5:47 am
- Location: Land of OZ, KANSAS
Re: Where to get a 12 Volt starter ?
My wiring is a mess. Where can I find a easy replacement nos. My Mutt is a Ford 1964.
-
- G-Lieutenant General
- Posts: 5913
- Joined: Sun Mar 19, 2006 10:04 am
- Location: Pemberton, New Jersey
Re: Where to get a 12 Volt starter ?
Well, You have an A1. To get a proper A1 harness you need to go aftermarket and you are looking at 1200.00!!! OR, You can use an A2 harness and just add the #77 circuits for the oil pressure safety switch and fuel pump. You need to extend a couple wires for the turn signals and make a minor modification for the 25 amp charging system. OR, You could put a 60 amp alternator in and plug it right into the A2 harness. You would need to go with the A2 pulleys and three belts. You are in Kansas so I would suggest calling Red River or Rapco for the parts.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
- acudanut
- USMC GUNNY
- Posts: 366
- Joined: Sat Feb 19, 2011 5:47 am
- Location: Land of OZ, KANSAS
Re: Where to get a 12 Volt starter ?
Looks like a A2 harness is a cheaper route. I wonder how much Red River sells the for. ?
BTW I hate electrical work. Wish I could pay someone to fix my issues.
BTW I hate electrical work. Wish I could pay someone to fix my issues.
-
- G-Lieutenant General
- Posts: 5913
- Joined: Sun Mar 19, 2006 10:04 am
- Location: Pemberton, New Jersey
Re: Where to get a 12 Volt starter ?
I would gladly come out and do it for you just to get out of NJ, The missus might have a little problem with that though considering she is still working and would have to stay behind.
1964 M151A1
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
1984 M1008
1967 M416
04/1952 M100
12/1952 M100- Departed
AN/TSQ-114A Trailblazer- Gone
Who is online
Users browsing this forum: No registered users and 33 guests