Willys MB 130887
-
- G-Sergeant Major
- Posts: 179
- Joined: Sun May 26, 2013 2:01 pm
- Location:
Re: Willys MB 130887
Look here and if you want DIY
viewtopic.php?f=4&t=247961
viewtopic.php?f=4&t=247961
- FJ.Janssen
- Sergeant Major of the Gee
- Posts: 250
- Joined: Fri Oct 09, 2009 4:34 am
- Location: Netherlands
Re: Willys MB 130887
THANKS!
That was the post I was looking for.
Seems the numbers on this page are most reflecting the tripmeter numbers from the Motometer: viewtopic.php?f=4&t=247961&start=60
Downloaded the files, now going to a friend who can help me with printing.
Kind regards
Frank
That was the post I was looking for.
Seems the numbers on this page are most reflecting the tripmeter numbers from the Motometer: viewtopic.php?f=4&t=247961&start=60
Downloaded the files, now going to a friend who can help me with printing.
Kind regards
Frank
1943 Dodge WC54- 81643667 (sold)
1942 Willy's MB - MB130887
1945 Studebaker Weasel M29C-6672 (body number)
Polynorm 1/4Te trailer (sold)
1945? 1/4Te trailer
Ben Hur 1Te trailer
Onan OTC 33-B
1939 DKW NZ250
1942 Willy's MB - MB130887
1945 Studebaker Weasel M29C-6672 (body number)
Polynorm 1/4Te trailer (sold)
1945? 1/4Te trailer
Ben Hur 1Te trailer
Onan OTC 33-B
1939 DKW NZ250
-
- G-Second Lieutenant
- Posts: 534
- Joined: Wed Oct 16, 2013 1:03 pm
- Location: West Sussex UK
Re: Willys MB 130887
FJ,
Your work is outstanding, excellent thread. Did you originally buy from a dealer?
regards
Steve
Your work is outstanding, excellent thread. Did you originally buy from a dealer?
regards
Steve
- FJ.Janssen
- Sergeant Major of the Gee
- Posts: 250
- Joined: Fri Oct 09, 2009 4:34 am
- Location: Netherlands
Re: Willys MB 130887
Thanks Steve.
Yes it was from a dealer...no I'm not 100% happy, but so be it.
In the end I have a lot of work on it, but also am learning a lot of it.
Last update is that last week I removed the oil pump, as it was always on max pressure.
Now it seemed that the max oil pressure valve was stuck.
I had a second pump, and had some trouble with getting it started again.
Saturday it fired up again, so now finalizing works to get started on the tub.
Regards
Frank
Yes it was from a dealer...no I'm not 100% happy, but so be it.
In the end I have a lot of work on it, but also am learning a lot of it.
Last update is that last week I removed the oil pump, as it was always on max pressure.
Now it seemed that the max oil pressure valve was stuck.
I had a second pump, and had some trouble with getting it started again.
Saturday it fired up again, so now finalizing works to get started on the tub.
Regards
Frank
1943 Dodge WC54- 81643667 (sold)
1942 Willy's MB - MB130887
1945 Studebaker Weasel M29C-6672 (body number)
Polynorm 1/4Te trailer (sold)
1945? 1/4Te trailer
Ben Hur 1Te trailer
Onan OTC 33-B
1939 DKW NZ250
1942 Willy's MB - MB130887
1945 Studebaker Weasel M29C-6672 (body number)
Polynorm 1/4Te trailer (sold)
1945? 1/4Te trailer
Ben Hur 1Te trailer
Onan OTC 33-B
1939 DKW NZ250
-
- G-Second Lieutenant
- Posts: 534
- Joined: Wed Oct 16, 2013 1:03 pm
- Location: West Sussex UK
Re: Willys MB 130887
Hi Frank,
Have you started on the tub yet?
Regards
Steve
Have you started on the tub yet?
Regards
Steve
- FJ.Janssen
- Sergeant Major of the Gee
- Posts: 250
- Joined: Fri Oct 09, 2009 4:34 am
- Location: Netherlands
Re: Willys MB 130887
Steve, sorry no not yet.
Hope to pick it up next week...
Will post pictures when I have it at home. It's now stored somewhere else.
Regards
Frank
Hope to pick it up next week...
Will post pictures when I have it at home. It's now stored somewhere else.
Regards
Frank
1943 Dodge WC54- 81643667 (sold)
1942 Willy's MB - MB130887
1945 Studebaker Weasel M29C-6672 (body number)
Polynorm 1/4Te trailer (sold)
1945? 1/4Te trailer
Ben Hur 1Te trailer
Onan OTC 33-B
1939 DKW NZ250
1942 Willy's MB - MB130887
1945 Studebaker Weasel M29C-6672 (body number)
Polynorm 1/4Te trailer (sold)
1945? 1/4Te trailer
Ben Hur 1Te trailer
Onan OTC 33-B
1939 DKW NZ250
-
- G-Lieutenant Colonel
- Posts: 1013
- Joined: Mon Sep 10, 2012 8:28 am
- Location:
Re: Willys MB 130887
Nice work Frank, looking great. Where did you get the battery hold down J-Bolts please - was it Paolo? Are you happy with them and the hold down frame?
Need some myself.
Cheers,
Dave
Need some myself.
Cheers,
Dave
GPW 68744 29-Sep-42
GPW 123050 01-Jun-43
MB 210793 11-Feb-43
GPW 123050 01-Jun-43
MB 210793 11-Feb-43
- FJ.Janssen
- Sergeant Major of the Gee
- Posts: 250
- Joined: Fri Oct 09, 2009 4:34 am
- Location: Netherlands
Re: Willys MB 130887
Dave I really have no clue any more where the J-bolts are coming from....
Too long time ago already.
Did some works on the Willys last weeks.
the Hood is prepared for sandblasting.
I replace the upper hinge of the outer windscreen, and I will replace the sheet metal.
Also made another purchase.
A split passenger seat. The sheet metal of it needs to be replace, and its a little bit twisted, but for the rest its really solid.
Too long time ago already.
Did some works on the Willys last weeks.
the Hood is prepared for sandblasting.
I replace the upper hinge of the outer windscreen, and I will replace the sheet metal.
Also made another purchase.
A split passenger seat. The sheet metal of it needs to be replace, and its a little bit twisted, but for the rest its really solid.
1943 Dodge WC54- 81643667 (sold)
1942 Willy's MB - MB130887
1945 Studebaker Weasel M29C-6672 (body number)
Polynorm 1/4Te trailer (sold)
1945? 1/4Te trailer
Ben Hur 1Te trailer
Onan OTC 33-B
1939 DKW NZ250
1942 Willy's MB - MB130887
1945 Studebaker Weasel M29C-6672 (body number)
Polynorm 1/4Te trailer (sold)
1945? 1/4Te trailer
Ben Hur 1Te trailer
Onan OTC 33-B
1939 DKW NZ250
- FJ.Janssen
- Sergeant Major of the Gee
- Posts: 250
- Joined: Fri Oct 09, 2009 4:34 am
- Location: Netherlands
Re: Willys MB 130887
Small update
New sheet metal on the outer windscreen.
Im not satisfied with the quality and accuracy of the replacements.
Their absolutaly not accoring the original, but Ill have to work with it, as making these items myself is currently not possible.
Windscreen:
Hood:
Regards
Frank
New sheet metal on the outer windscreen.
Im not satisfied with the quality and accuracy of the replacements.
Their absolutaly not accoring the original, but Ill have to work with it, as making these items myself is currently not possible.
Windscreen:
Hood:
Regards
Frank
1943 Dodge WC54- 81643667 (sold)
1942 Willy's MB - MB130887
1945 Studebaker Weasel M29C-6672 (body number)
Polynorm 1/4Te trailer (sold)
1945? 1/4Te trailer
Ben Hur 1Te trailer
Onan OTC 33-B
1939 DKW NZ250
1942 Willy's MB - MB130887
1945 Studebaker Weasel M29C-6672 (body number)
Polynorm 1/4Te trailer (sold)
1945? 1/4Te trailer
Ben Hur 1Te trailer
Onan OTC 33-B
1939 DKW NZ250
- FJ.Janssen
- Sergeant Major of the Gee
- Posts: 250
- Joined: Fri Oct 09, 2009 4:34 am
- Location: Netherlands
Re: Willys MB 130887
For everybody I promised it to.
Herewith some pictures of my original body.
Body nr.
As this is currently far beyond my "willing" to restore point, I'm going to search for a replacement tub.
Most probably it will be a repro from France or from Asia.
When anybody needs some pictures of anything, please let me know so I can take them for you.
[img]hhttps://lh3.googleusercontent.com/EDdBAF8xFiNlJru50V-JFfBdAsJCKZANykadoDSi9QrkD2bwQ8n6AvO3S-pXdfZvXzGIq-qK1df5hbZvt-GV5FAn8QZfMNHWQWwtXNgj_fncq3Nzp6Tbxe6fwZQHNPJP2Ae6IGS2RSfknPzZUKzeaaQX8S0i1aC0dejgHko5vZu6vZxacuOU2Eis1fIqQx0jZR3Xm36MJ5DHDCd1q1bYOFptL9-pKGclJ83kz-fmL-M6XES-nZiyjG8XGpD_qINCFkm0IVZBNe-BFTaBqpNYq8c_BXzUhyJjb4my8bPQvJeMPyDNVZ_y2j3CEdE2OZ4pBAppXzKr2XLdY_Yh4rBBTkpeFbJ-PQGwO7BjX3HjbKgi4ZeeGeGtrNV8vardrTTgzxHoi2F0xfsVFoQr8WMo4GZ3CFzCeahIwkkywYEZTgxMiUSUQoAHwQ4ar2X0sX9beoGw-KFBmLEauyI1se-KxxX0bGn8aYFu1SaBC46ra-fe1547rP-3-sV_MR-dCHfpADw57ZANRJcoHCNFX-PTEcn6C0u2_IOzE7Ipg6FtGTM=w1260-h945-no[/img]
Herewith some pictures of my original body.
Body nr.
As this is currently far beyond my "willing" to restore point, I'm going to search for a replacement tub.
Most probably it will be a repro from France or from Asia.
When anybody needs some pictures of anything, please let me know so I can take them for you.
[img]hhttps://lh3.googleusercontent.com/EDdBAF8xFiNlJru50V-JFfBdAsJCKZANykadoDSi9QrkD2bwQ8n6AvO3S-pXdfZvXzGIq-qK1df5hbZvt-GV5FAn8QZfMNHWQWwtXNgj_fncq3Nzp6Tbxe6fwZQHNPJP2Ae6IGS2RSfknPzZUKzeaaQX8S0i1aC0dejgHko5vZu6vZxacuOU2Eis1fIqQx0jZR3Xm36MJ5DHDCd1q1bYOFptL9-pKGclJ83kz-fmL-M6XES-nZiyjG8XGpD_qINCFkm0IVZBNe-BFTaBqpNYq8c_BXzUhyJjb4my8bPQvJeMPyDNVZ_y2j3CEdE2OZ4pBAppXzKr2XLdY_Yh4rBBTkpeFbJ-PQGwO7BjX3HjbKgi4ZeeGeGtrNV8vardrTTgzxHoi2F0xfsVFoQr8WMo4GZ3CFzCeahIwkkywYEZTgxMiUSUQoAHwQ4ar2X0sX9beoGw-KFBmLEauyI1se-KxxX0bGn8aYFu1SaBC46ra-fe1547rP-3-sV_MR-dCHfpADw57ZANRJcoHCNFX-PTEcn6C0u2_IOzE7Ipg6FtGTM=w1260-h945-no[/img]
1943 Dodge WC54- 81643667 (sold)
1942 Willy's MB - MB130887
1945 Studebaker Weasel M29C-6672 (body number)
Polynorm 1/4Te trailer (sold)
1945? 1/4Te trailer
Ben Hur 1Te trailer
Onan OTC 33-B
1939 DKW NZ250
1942 Willy's MB - MB130887
1945 Studebaker Weasel M29C-6672 (body number)
Polynorm 1/4Te trailer (sold)
1945? 1/4Te trailer
Ben Hur 1Te trailer
Onan OTC 33-B
1939 DKW NZ250
- FJ.Janssen
- Sergeant Major of the Gee
- Posts: 250
- Joined: Fri Oct 09, 2009 4:34 am
- Location: Netherlands
Re: Willys MB 130887
Still only small progress.
Cleaning parts, and preparing everything for if I ever have a new body.
Can somebody inform me where to get only the steel fuse plate of the circuit breaker?
I found 2x Klixon 8A circuit breakers. Of which 1 has a broken steel fuse plate...
Looking for the steel insert only!
Cleaning parts, and preparing everything for if I ever have a new body.
Can somebody inform me where to get only the steel fuse plate of the circuit breaker?
I found 2x Klixon 8A circuit breakers. Of which 1 has a broken steel fuse plate...
Looking for the steel insert only!
1943 Dodge WC54- 81643667 (sold)
1942 Willy's MB - MB130887
1945 Studebaker Weasel M29C-6672 (body number)
Polynorm 1/4Te trailer (sold)
1945? 1/4Te trailer
Ben Hur 1Te trailer
Onan OTC 33-B
1939 DKW NZ250
1942 Willy's MB - MB130887
1945 Studebaker Weasel M29C-6672 (body number)
Polynorm 1/4Te trailer (sold)
1945? 1/4Te trailer
Ben Hur 1Te trailer
Onan OTC 33-B
1939 DKW NZ250
- FJ.Janssen
- Sergeant Major of the Gee
- Posts: 250
- Joined: Fri Oct 09, 2009 4:34 am
- Location: Netherlands
Re: Willys MB 130887
I checked my post here, and in September 2015 I brought my old body home.
It was original to the Willys and body number and data plate were matching.
After a good investigation, as I found absolutely no straight steelwork, I decided to buy a new body and rebuild it to my wishes.
I'm now so far done that I started painting so finaly some progress.
The body was bought from a vendor in the Netherlands, selling the MD Juan bodies of which I have a 2015 model.
I was both shocked and very happy with the delivered quality.
As I have a March 1942 Willys I changed some things to get it more to what it should be as that it was when bought new.
- Removed the installed glove box, and welded in the one from the original
- Closed all holes that were not correct
- drilled all holes (those are a lot!)
- cut out parts of the firewall, and welded in new (connection studs for the filterette)
- Changed out the welded tank strap bracket on the body floor for the original (those are so different repro vs. original)
- Welded in the side reinforcement on the driver side from floor to top rails
- Modified the fuel tank well, the reinforcement profile bended to early causing a clash with the tank
- Removed the installed glove box door, and installed the original (those 2 are absolutely not matching)
- Removed captive nuts on the positioned where a bolt-nut connection was required.
Off course there are also positive thing, and negative, anyway, restoring my original body would have taken a long long time and if I could have kept 10% original I would have be very happy.
From another vendor I bought a early seat frame for my seat.
I seemed that the openings were manufactured too much to the center of the seat plate.
I cut out that part and rewelded for fitment.
Below all the pictures.
Regards
Frank
Filterette + filters
Door needs to be fabricated
Glove box door + new plates + lock
Holes not in the correct position
Seat frame with tackwelded openings
It was original to the Willys and body number and data plate were matching.
After a good investigation, as I found absolutely no straight steelwork, I decided to buy a new body and rebuild it to my wishes.
I'm now so far done that I started painting so finaly some progress.
The body was bought from a vendor in the Netherlands, selling the MD Juan bodies of which I have a 2015 model.
I was both shocked and very happy with the delivered quality.
As I have a March 1942 Willys I changed some things to get it more to what it should be as that it was when bought new.
- Removed the installed glove box, and welded in the one from the original
- Closed all holes that were not correct
- drilled all holes (those are a lot!)
- cut out parts of the firewall, and welded in new (connection studs for the filterette)
- Changed out the welded tank strap bracket on the body floor for the original (those are so different repro vs. original)
- Welded in the side reinforcement on the driver side from floor to top rails
- Modified the fuel tank well, the reinforcement profile bended to early causing a clash with the tank
- Removed the installed glove box door, and installed the original (those 2 are absolutely not matching)
- Removed captive nuts on the positioned where a bolt-nut connection was required.
Off course there are also positive thing, and negative, anyway, restoring my original body would have taken a long long time and if I could have kept 10% original I would have be very happy.
From another vendor I bought a early seat frame for my seat.
I seemed that the openings were manufactured too much to the center of the seat plate.
I cut out that part and rewelded for fitment.
Below all the pictures.
Regards
Frank
Filterette + filters
Door needs to be fabricated
Glove box door + new plates + lock
Holes not in the correct position
Seat frame with tackwelded openings
1943 Dodge WC54- 81643667 (sold)
1942 Willy's MB - MB130887
1945 Studebaker Weasel M29C-6672 (body number)
Polynorm 1/4Te trailer (sold)
1945? 1/4Te trailer
Ben Hur 1Te trailer
Onan OTC 33-B
1939 DKW NZ250
1942 Willy's MB - MB130887
1945 Studebaker Weasel M29C-6672 (body number)
Polynorm 1/4Te trailer (sold)
1945? 1/4Te trailer
Ben Hur 1Te trailer
Onan OTC 33-B
1939 DKW NZ250
- FJ.Janssen
- Sergeant Major of the Gee
- Posts: 250
- Joined: Fri Oct 09, 2009 4:34 am
- Location: Netherlands
Re: Willys MB 130887
Some more steps ahead.
Rear side completed, only the 3 stud spare tire carrier needs to be installed.
Started with outfitting the dash.
Firewall seen from the engine side.
I forgot to install the firewall padding, so all cables are again removed...
Rear side completed, only the 3 stud spare tire carrier needs to be installed.
Started with outfitting the dash.
Firewall seen from the engine side.
I forgot to install the firewall padding, so all cables are again removed...
1943 Dodge WC54- 81643667 (sold)
1942 Willy's MB - MB130887
1945 Studebaker Weasel M29C-6672 (body number)
Polynorm 1/4Te trailer (sold)
1945? 1/4Te trailer
Ben Hur 1Te trailer
Onan OTC 33-B
1939 DKW NZ250
1942 Willy's MB - MB130887
1945 Studebaker Weasel M29C-6672 (body number)
Polynorm 1/4Te trailer (sold)
1945? 1/4Te trailer
Ben Hur 1Te trailer
Onan OTC 33-B
1939 DKW NZ250
- FJ.Janssen
- Sergeant Major of the Gee
- Posts: 250
- Joined: Fri Oct 09, 2009 4:34 am
- Location: Netherlands
Re: Willys MB 130887
Got most of the bodywork done and the main wiring harness etc in.
Had to do some mod's on the wiring harness, but all in now and seems to be working correctly.
And the turning signals working also:
https://photos.google.com/photo/AF1QipM ... lS8LK10s2N
regards
Frank
Had to do some mod's on the wiring harness, but all in now and seems to be working correctly.
And the turning signals working also:
https://photos.google.com/photo/AF1QipM ... lS8LK10s2N
regards
Frank
1943 Dodge WC54- 81643667 (sold)
1942 Willy's MB - MB130887
1945 Studebaker Weasel M29C-6672 (body number)
Polynorm 1/4Te trailer (sold)
1945? 1/4Te trailer
Ben Hur 1Te trailer
Onan OTC 33-B
1939 DKW NZ250
1942 Willy's MB - MB130887
1945 Studebaker Weasel M29C-6672 (body number)
Polynorm 1/4Te trailer (sold)
1945? 1/4Te trailer
Ben Hur 1Te trailer
Onan OTC 33-B
1939 DKW NZ250
-
- G-Colonel
- Posts: 1649
- Joined: Mon Jul 09, 2007 2:17 pm
- Location: Florence,Kentucky
- Contact:
Re: Willys MB 130887
Frank it is outstanding work.Great to see another 1/4 ton returned to its youthful appearance.Did you ever find the circuit breaker part you needed awhile back? I ran across some recently.We are still at (about the same) restorative point...
Well done-
Well done-
Ralph
Who is online
Users browsing this forum: No registered users and 53 guests