G503.com Message Forums
Military Vehicles, WWII Jeeps and more!
sn 35614 info needed
Moderator: Moderator
8 posts
• Page 1 of 1
sn 35614 info needed
by KWSIEBERT » Thu Sep 15, 2011 1:38 pm
Hey guys, just bought a 1942 Ford script jeep the other day, and was trying to figure out the block. I am pretty sure the block does not match, it appears to have a WWII block installed the casting date is 5-3 followed by 638632 w1 n1 cr n2. It does have a Willys head. I tried to make out the number stamped on the pad on the side and the only I can come up with is 60007. By the way the DOD is 3-11-42. Any info on this block would be appreciated! Also I found a matching frame number , but it was stamped on the motor mount bracket. Is this possibly right? Thanks Kevin
1943 gpw 116413
1946 cj2a Agri-jeep
1946 cj2a Agri-jeep
- KWSIEBERT
- G-Corporal
- Posts: 28
- Joined: Wed Apr 13, 2011 10:38 am
Re: sn 35614 info needed
by Tom Wolboldt » Thu Sep 15, 2011 3:40 pm
Hello,
Your numbers do not add up. Can you post or email to me photos of the serial number data plate, frame serial number stamping, and motor serial number? Thanks in advance!
Your numbers do not add up. Can you post or email to me photos of the serial number data plate, frame serial number stamping, and motor serial number? Thanks in advance!
Tom
"GPW Whisperer"
http://www.thegpwstory.com and other WW2 Ford vehicles
I was told by a Gee member w/ 60+ yrs experience that I am part of the problem so I am out of here as to public Tech Answers so as to not degrade the Gee. 21 March, 2013
I see Hypocrites
"GPW Whisperer"
http://www.thegpwstory.com and other WW2 Ford vehicles
I was told by a Gee member w/ 60+ yrs experience that I am part of the problem so I am out of here as to public Tech Answers so as to not degrade the Gee. 21 March, 2013
I see Hypocrites
- Tom Wolboldt
- G-Lieutenant General
- Posts: 5889
- Joined: Fri Jul 02, 2004 3:36 pm
- Location: Ohio
Re: sn 35614 info needed
by KWSIEBERT » Fri Sep 16, 2011 5:35 am
hey tom,
I will see if i can get a better camera to get a better pic than what i am getting with my phone. I did double check everything and it appears to be as I stated. The data plates appear to be originals and don't appear ever to have been removed. Is it possible that they stamped the frame number on the motor mount bracket? I will try to get some pics to you soon! Thanks again Kevin
I will see if i can get a better camera to get a better pic than what i am getting with my phone. I did double check everything and it appears to be as I stated. The data plates appear to be originals and don't appear ever to have been removed. Is it possible that they stamped the frame number on the motor mount bracket? I will try to get some pics to you soon! Thanks again Kevin
1943 gpw 116413
1946 cj2a Agri-jeep
1946 cj2a Agri-jeep
- KWSIEBERT
- G-Corporal
- Posts: 28
- Joined: Wed Apr 13, 2011 10:38 am
Re: sn 35614 info needed
by Tom Wolboldt » Fri Sep 16, 2011 7:50 am
On a '42 GPW a serial number stamping on the motor mount bracket can be correct.
Tom
"GPW Whisperer"
http://www.thegpwstory.com and other WW2 Ford vehicles
I was told by a Gee member w/ 60+ yrs experience that I am part of the problem so I am out of here as to public Tech Answers so as to not degrade the Gee. 21 March, 2013
I see Hypocrites
"GPW Whisperer"
http://www.thegpwstory.com and other WW2 Ford vehicles
I was told by a Gee member w/ 60+ yrs experience that I am part of the problem so I am out of here as to public Tech Answers so as to not degrade the Gee. 21 March, 2013
I see Hypocrites
- Tom Wolboldt
- G-Lieutenant General
- Posts: 5889
- Joined: Fri Jul 02, 2004 3:36 pm
- Location: Ohio
Re: sn 35614 info needed
by KWSIEBERT » Tue Jan 10, 2012 12:49 pm
hey tom finally was able to get a pic of the data plate any ideas on the dod?
- 7644f0c94f1d9c5f1326224625.jpeg (167.44 KiB) Viewed 310 times
1943 gpw 116413
1946 cj2a Agri-jeep
1946 cj2a Agri-jeep
- KWSIEBERT
- G-Corporal
- Posts: 28
- Joined: Wed Apr 13, 2011 10:38 am
Re: sn 35614 info needed
by Tom Wolboldt » Tue Jan 10, 2012 1:06 pm
Poor reproduction ( or possible replacement ? )data plate. Most of the stamped in data is questionable at best.
Based on the frame serial number being stamped on the motor mount bracket ( photo please ) your GPW 35614 should have come from the Louisville, Ky. assembly plant.
The weight on the original plate would have been 2265. The original DoD was most likely 06 - 11 - 42.
Is that a key lock glove box door or a push button one ? ( Push button ones have a hole higher in the door than the key lock ones).
Based on the frame serial number being stamped on the motor mount bracket ( photo please ) your GPW 35614 should have come from the Louisville, Ky. assembly plant.
The weight on the original plate would have been 2265. The original DoD was most likely 06 - 11 - 42.
Is that a key lock glove box door or a push button one ? ( Push button ones have a hole higher in the door than the key lock ones).
Tom
"GPW Whisperer"
http://www.thegpwstory.com and other WW2 Ford vehicles
I was told by a Gee member w/ 60+ yrs experience that I am part of the problem so I am out of here as to public Tech Answers so as to not degrade the Gee. 21 March, 2013
I see Hypocrites
"GPW Whisperer"
http://www.thegpwstory.com and other WW2 Ford vehicles
I was told by a Gee member w/ 60+ yrs experience that I am part of the problem so I am out of here as to public Tech Answers so as to not degrade the Gee. 21 March, 2013
I see Hypocrites
- Tom Wolboldt
- G-Lieutenant General
- Posts: 5889
- Joined: Fri Jul 02, 2004 3:36 pm
- Location: Ohio
Re: sn 35614 info needed
by KWSIEBERT » Tue Jan 10, 2012 1:53 pm
push button lock. Trying to get a readable pic of the frame number.
1943 gpw 116413
1946 cj2a Agri-jeep
1946 cj2a Agri-jeep
- KWSIEBERT
- G-Corporal
- Posts: 28
- Joined: Wed Apr 13, 2011 10:38 am
Re: sn 35614 info needed
by KWSIEBERT » Tue Jan 10, 2012 2:05 pm
- jeep2.jpeg (191.74 KiB) Viewed 304 times
1943 gpw 116413
1946 cj2a Agri-jeep
1946 cj2a Agri-jeep
- KWSIEBERT
- G-Corporal
- Posts: 28
- Joined: Wed Apr 13, 2011 10:38 am
8 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest