CJ-2A Modifications Borrowed from Military Jeeps

1945 - 196*, Willys CJ series, modifications, sugestions, and ideas
Post Reply
User avatar
Rufus
G-Sergeant
G-Sergeant
Posts: 47
Joined: Mon Oct 30, 2006 9:49 am
Location: Tallahassee, Fla., USA

CJ-2A Modifications Borrowed from Military Jeeps

Post by Rufus » Wed Nov 01, 2006 7:31 pm

I was 14 when I purchased my jeep (1948 CJ-2A) and there was no internet, credit card mail ordering or “repro” parts. All parts were hard to find. The only Willys vehicles I could find in junk yards were a few of the old wagons, however I discovered that the front parking lights were perfectly interchangeable and the truck/wagon lights are glass – not plastic. Other than this all of my modifications are borrowed from the military jeeps. From what was left of the tail lights (some P.O. had added one to the right side) that were on the jeep I could tell that they hadn’t been very sturdy; so I cut holes in the sheet metal, made up some brackets and installed M-series tail lights that are recessed in the body M38-style. That was over 20 years ago and I haven’t even scratched the paint on them since.

A few years ago I modified the bracket that holds the pedal cross shaft into a bolt-on affair (MB/GPW-style) to make servicing and repair easier (see my reply to the “Time Saving Holes Installed” topic on this message board for details).

Recently, I installed a pintle hitch (I don’t use the tailgate anyway) on the rear frame and an MB/GPW intervehicular cable socket in the hole that Willys-Overland very accommodatingly left over from MB production in the rear of the jeep (above the left rear tail light) so that I can hook-up my WWII Bantam T-3 trailer (when I finish restoring it!).

I also installed a slave receptacle on the front to make jump starting easier (I have them on all my vehicles – even my 1959 Oliver tractor!). I use the NATO style (except on my M37) and I installed it vertically between the bumper and the grille (inside the frame rail) on a home-made bracket; so it is protected but conveniently located and I didn’t have to drill any more holes in the jeep. I made up my own slave cables using No. 4 jumper cables, some surplus slave cable plugs and welding cable quick-connects so that I can interchange one of the slave plugs with the original gator clips when I need to jump off another vehicle that doesn’t have a slave receptacle.


User avatar
run forrest run
G-First Lieutenant
G-First Lieutenant
Posts: 666
Joined: Thu Apr 20, 2006 11:52 am
Location: Refugee from Der Pipples Socialist Republik of Kali, now living in a free state.

Post by run forrest run » Mon Dec 04, 2006 9:29 pm

Great stuff. I like easy modifications that are handy but can be removed easily.

I have an old Sears catalog specifically for jeep stuff. Printed in the early 60s. The prices are remarkable :shock: brand new transfer cases. (not rebuilt) for peanuts so to speak. Maybe I will scan a few pages and post it here if enough people are interested.

Post Reply

Return to “CJ's Modifications”

Who is online

Users browsing this forum: No registered users and 28 guests