Hi Everyone
It's hard to tell with original photographs from inside of WWII US tanks (e.g. Shermans and Stuarts), which paint finish was used. Does anyone have an opinion about the type of sheen? If sheen is described as matte, satin, semi-gloss, and gloss, which would best describe the paint inside of the turret and fighting compartment of an M3A1 Stuart light tank built during 1942?
Thanks
Steve
Question About WWII US Tank Fighting Compartment Paint?
-
- G-Sergeant Major
- Posts: 176
- Joined: Sat Nov 11, 2006 12:14 pm
- Location: Illinois
Question About WWII US Tank Fighting Compartment Paint?
1942 Ford GPW (EP)
1943 Willys MBT
1943 Willys MBT
-
- G-Captain
- Posts: 739
- Joined: Wed Sep 29, 2004 5:12 am
- Location: Texas
Re: Question About WWII US Tank Fighting Compartment Paint?
I use a white epoxy primer inside of the vehicle. PPG DP48LF is a great primer. Best to use the 401 catalyst rather than the 402 on bare metal. Also it has a 20 minute induction time. This is important.
Once primed, I have used the PPG Shopline JAU line with success. It is an acrylic urethane. I have settled on OEM Code DT1189 as the shade of white. it is a gloss finish. It also has an induction time, but the pot life is fairly long.
Best to print out the PPG Spec Sheets and read before using. Paul
Once primed, I have used the PPG Shopline JAU line with success. It is an acrylic urethane. I have settled on OEM Code DT1189 as the shade of white. it is a gloss finish. It also has an induction time, but the pot life is fairly long.
Best to print out the PPG Spec Sheets and read before using. Paul
1944 WC51
1944 WC62
1943 M-20
1943 Ben Hur
1943 Water Ben Hur
1944 M51 Quad Mount Trailer
1944 M5A1 Stuart
1943 352 CCKW
1944 Corbitt 6 Ton
1944 M16 Halftrack
1944 WC62
1943 M-20
1943 Ben Hur
1943 Water Ben Hur
1944 M51 Quad Mount Trailer
1944 M5A1 Stuart
1943 352 CCKW
1944 Corbitt 6 Ton
1944 M16 Halftrack
-
- G-Captain
- Posts: 739
- Joined: Wed Sep 29, 2004 5:12 am
- Location: Texas
Re: Question About WWII US Tank Fighting Compartment Paint?
Although I have used PPG primers in the past I always use the TM9 Ordnance primers. I have used the TM9 white epoxy primer for many of the parts inside of my M5A1. I have not started the hull.
I did not realize that Midwest Military has continued to offer the TM9 white epoxy primer. This epoxy primer is an outstanding product and about half the price of the PPG DP primers.
The TM9 epoxies mix at a 4:1:1 ratio of primer:catalyst:reducer. As far as reducers go, use xylene. However if the temperature is less than 80 degrees you can use MEK. The epoxy will dry faster. Paul
I did not realize that Midwest Military has continued to offer the TM9 white epoxy primer. This epoxy primer is an outstanding product and about half the price of the PPG DP primers.
The TM9 epoxies mix at a 4:1:1 ratio of primer:catalyst:reducer. As far as reducers go, use xylene. However if the temperature is less than 80 degrees you can use MEK. The epoxy will dry faster. Paul
1944 WC51
1944 WC62
1943 M-20
1943 Ben Hur
1943 Water Ben Hur
1944 M51 Quad Mount Trailer
1944 M5A1 Stuart
1943 352 CCKW
1944 Corbitt 6 Ton
1944 M16 Halftrack
1944 WC62
1943 M-20
1943 Ben Hur
1943 Water Ben Hur
1944 M51 Quad Mount Trailer
1944 M5A1 Stuart
1943 352 CCKW
1944 Corbitt 6 Ton
1944 M16 Halftrack
- SURPDLR
- G-First Lieutenant
- Posts: 609
- Joined: Sun Oct 03, 2004 6:14 am
- Location: PENNSYLVANIA
- Contact:
Re: Question About WWII US Tank Fighting Compartment Paint?
And Halifaxgroup knows of what he speaks when it comes to paint!!!!halifaxgroup wrote: ↑Mon Jan 29, 2018 4:47 amAlthough I have used PPG primers in the past I always use the TM9 Ordnance primers. I have used the TM9 white epoxy primer for many of the parts inside of my M5A1. I have not started the hull.
I did not realize that Midwest Military has continued to offer the TM9 white epoxy primer. This epoxy primer is an outstanding product and about half the price of the PPG DP primers.
The TM9 epoxies mix at a 4:1:1 ratio of primer:catalyst:reducer. As far as reducers go, use xylene. However if the temperature is less than 80 degrees you can use MEK. The epoxy will dry faster. Paul
JEFF HAIN-MATSON
FRONT LINE MILITARY VEHICLES
WRIGHTSVILLE PA
717-252-4489
INDIAN 741
INDIAN 841
MATCHLESS G3
MATCHLESS G3L
AND SEVERAL OTHER WHEELED AND TRACKED TOYS!!
MVPA #1833
IMPS #1726
MVT #9362
FRONT LINE MILITARY VEHICLES
WRIGHTSVILLE PA
717-252-4489
INDIAN 741
INDIAN 841
MATCHLESS G3
MATCHLESS G3L
AND SEVERAL OTHER WHEELED AND TRACKED TOYS!!
MVPA #1833
IMPS #1726
MVT #9362
Who is online
Users browsing this forum: No registered users and 59 guests