M20 / M8 Parts Crossover Chart
-
- G-Civilian
- Posts: 2
- Joined: Mon Oct 21, 2013 5:39 am
- Location:
Re: M20 / M8 Parts Crossover Chart
Jon:
Where do we find the correct clutch disks for the M20/M8? I'm looking for an NOS or a rebuild.
Patrick
Where do we find the correct clutch disks for the M20/M8? I'm looking for an NOS or a rebuild.
Patrick
-
- G-First Lieutenant
- Posts: 640
- Joined: Thu Dec 30, 2004 6:45 pm
- Location:
Re: M20 / M8 Parts Crossover Chart
All,
FYI.
A currently available replacement for the throw-out bearing is the N1171 Clutch Release Bearing (seen in the SKF and American Bearings brands).
Dave
FYI.
A currently available replacement for the throw-out bearing is the N1171 Clutch Release Bearing (seen in the SKF and American Bearings brands).
Dave
- Attachments
-
- 24- Throw-out Bearing b.jpg (86.58 KiB) Viewed 7301 times
- 3rdarmy
- G-Sergeant
- Posts: 35
- Joined: Wed Apr 13, 2011 5:38 am
- Location:
- Contact:
Re: M20 / M8 Parts Crossover Chart
Looking for crossover for AC fuel pump kit M20 and M 8. AC 1523817 duel pump. Ours desintigrated with modern fuel. Need parts compatable with newer fuel. Any suggestions?
Denny
Denny
43 MB
CCKW Shop Van
WC 53 Command Car
M20 Armored Car
Do Not Take Council of Your Fears
General Patton
www.pattonthirdarmy.com
CCKW Shop Van
WC 53 Command Car
M20 Armored Car
Do Not Take Council of Your Fears
General Patton
www.pattonthirdarmy.com
-
- Sergeant Major of the Gee
- Posts: 399
- Joined: Thu Feb 07, 2008 8:16 am
- Location: East Coast
Re: M20 / M8 Parts Crossover Chart
Ayone have a part number for the rubber hydraulic line back by the clutch slave cylinder?
Mine is rough shape and appears it could go at any moment.
[attachment=0]image.jpg[/attachment]
Mine is rough shape and appears it could go at any moment.
[attachment=0]image.jpg[/attachment]
- Attachments
-
- image.jpg (124.09 KiB) Viewed 7192 times
-
- Sergeant Major of the Gee
- Posts: 383
- Joined: Sat Sep 08, 2007 6:44 am
- Location: Australia
- Contact:
Re: M20 / M8 Parts - Starter Solenoid
Listees
I am in need of a starter motor solenoid.
G134-0389052
FM-09B-11450
B248697
12V of course.
My starter solenoid has a failed coil. It has
also had the benefit of some ham fisted baboon who has
stripped the bronze threads.
Does anyone have any suggestions where I might get one?
Thanks
Doug
I am in need of a starter motor solenoid.
G134-0389052
FM-09B-11450
B248697
12V of course.
My starter solenoid has a failed coil. It has
also had the benefit of some ham fisted baboon who has
stripped the bronze threads.
Does anyone have any suggestions where I might get one?
Thanks
Doug
-
- Sergeant Major of the Gee
- Posts: 399
- Joined: Thu Feb 07, 2008 8:16 am
- Location: East Coast
Re: M20 / M8 Parts Crossover Chart
Modern ford truck solenoid looks exactly like the orig.
shouldnt be hard to find at any auto parts store. If you cant find one, i will get the part number off mine on Thursday.
shouldnt be hard to find at any auto parts store. If you cant find one, i will get the part number off mine on Thursday.
-
- Sergeant Major of the Gee
- Posts: 383
- Joined: Sat Sep 08, 2007 6:44 am
- Location: Australia
- Contact:
Re: M20 / M8 Parts Crossover Chart
Would you do that please and suggest best place to purchase?82ndrecontbp wrote:Modern ford truck solenoid looks exactly like the orig.
shouldnt be hard to find at any auto parts store. If you cant find one, i will get the part number off mine on Thursday.
Most of what I have found on internet have been low quality.
Also, does your replacement have the manual activation button the same as original?
Regards
Doug
-
- Sergeant Major of the Gee
- Posts: 399
- Joined: Thu Feb 07, 2008 8:16 am
- Location: East Coast
Re: M20 / M8 Parts Crossover Chart
I putz my through this armored car with the manual in one hand and the wrong tool in the other.
I have no idea what a manual activator even is, until now, never even heard of that - and I've spent ages pouring over the manual.
Just that the picture of an original, and the OLD OLD crusty one I pulled out of mine to replace looks exactly like a modern Ford 12v truck solenoid.
Here, we can buy them at Sears, Autozone, Napa, etc. for perhaps $20 max. Someone correct me..?
I have no idea what a manual activator even is, until now, never even heard of that - and I've spent ages pouring over the manual.
Just that the picture of an original, and the OLD OLD crusty one I pulled out of mine to replace looks exactly like a modern Ford 12v truck solenoid.
Here, we can buy them at Sears, Autozone, Napa, etc. for perhaps $20 max. Someone correct me..?
-
- Sergeant Major of the Gee
- Posts: 399
- Joined: Thu Feb 07, 2008 8:16 am
- Location: East Coast
Re: M20 / M8 Parts Crossover Chart
Hey Guys.
Clutch Slave cylinder seal and boots are shot. Anyone have rebuild kit crossovers to recommend? Its one of the blank lines on the list.
Thanks!
Tom
Clutch Slave cylinder seal and boots are shot. Anyone have rebuild kit crossovers to recommend? Its one of the blank lines on the list.
Thanks!
Tom
-
- Sergeant Major of the Gee
- Posts: 399
- Joined: Thu Feb 07, 2008 8:16 am
- Location: East Coast
Re: M20 / M8 Parts Crossover Chart
I have discovered through exhaustive searching that the lockheed clutch slave cylinder marked "A 1114" is an exact copy.
They arent a whole lot easier to find, but at least its a start.
They arent a whole lot easier to find, but at least its a start.
- lssah2025
- G-Command Sergeant Major
- Posts: 249
- Joined: Sun Feb 18, 2007 3:39 pm
- Location: St. Louis, Mo and OCONUS
- Contact:
Re: M20 / M8 Parts Crossover Chart
Great work on the list, makes restoring and upkeep easier, I wish my Humber was this easy!!!
40 Royal Enfield WD/C
42 A24 MK VII Cavalier
43 Humber AC MK IV F133744 "Vandal" tri-owner
43 A27L Centaur MK III T185481
43 Daimler Dingo MK II F205994
42 A24 MK VII Cavalier
43 Humber AC MK IV F133744 "Vandal" tri-owner
43 A27L Centaur MK III T185481
43 Daimler Dingo MK II F205994
- steveo916
- G-Major
- Posts: 982
- Joined: Mon Feb 07, 2005 7:49 pm
- Location: northern california
- Contact:
Re: M20 / M8 Parts Crossover Chart
keep up the good work
Last edited by steveo916 on Tue Aug 19, 2014 10:06 pm, edited 1 time in total.
m16 halftrack
- steveo916
- G-Major
- Posts: 982
- Joined: Mon Feb 07, 2005 7:49 pm
- Location: northern california
- Contact:
Re: M20 / M8 Parts Crossover Chart
keep up the good work
and acknowledging people for there efforts
and acknowledging people for there efforts
Last edited by steveo916 on Tue Aug 19, 2014 10:09 pm, edited 1 time in total.
m16 halftrack
-
- G-Lieutenant Colonel
- Posts: 1002
- Joined: Wed Jan 18, 2012 12:24 pm
- Location: 70 km outside of Melbourne Australia
Re: M20 / M8 Parts Crossover Chart
Did you find a replacement for that sad looking hose in the clutch hydraulic line 82ndrecontbp? Maybe a good brake shop could make one up for you other than that perhaps a hose specialist? You've probably got it sorted by now.
David
David
-
- Sergeant Major of the Gee
- Posts: 399
- Joined: Thu Feb 07, 2008 8:16 am
- Location: East Coast
Re: M20 / M8 Parts Crossover Chart
I did thankfully. Finding someone to make it up was not easy.
The slave and master cylinders ended up needing replacement as well. So it was fun fun fun.
TP
The slave and master cylinders ended up needing replacement as well. So it was fun fun fun.
TP
Who is online
Users browsing this forum: No registered users and 39 guests