Arghhhh. Well my 44 MB is well underway to an engine /tranny replant.
Ya see, I bought this running excellent condition bodied jeep locally.
Yea, I knew when I bought it the jeep had an incorrect F head installed
To the original tranny and transfer case.
I knew that a previous owner many years ago took out the L head and installed a F head in its place.
The install or so I thought was well done, dropping the higher F head down into the chassis enough so that the hood didn't need cutting to clear the carb
What was done, now that I'm taking out the f head and putting in a proper L head, was the "restorer" cut and modified
The metal frame mounts to make it sit lower.. Arghhh.
Now I need to cut the fabbed and welded mess and replace with correct
Mounts.
Anyone have a junked and rusted front frame section that I can buy the mounts off of?7
Junk frame? Need metal motor mounts
-
- G-Major General
- Posts: 2570
- Joined: Thu Mar 09, 2006 10:54 am
- Location: Colorado
- Contact:
-
- G-Lieutenant General
- Posts: 4210
- Joined: Tue Aug 15, 2006 10:42 am
- Location: Middletown,Pa
Re: Junk frame? Need metal motor mounts
PM me please
Ed S
Ed S
54 CJ-3A/B
56 DJ-3A for sale
45 GPW 271022, USMC 46 CJ-2A 2WD"gasser"
50 CJ-V35
58 CJ-3B
57 DJ-3A chassis for sale
56 DJ-3A for sale
45 GPW 271022, USMC 46 CJ-2A 2WD"gasser"
50 CJ-V35
58 CJ-3B
57 DJ-3A chassis for sale
-
- G-Lieutenant General
- Posts: 4525
- Joined: Sun Jul 20, 2003 6:03 pm
- Location: Little Meadows PA
Re: Junk frame? Need metal motor mounts
Might have a set, before I look do you still need them.
Adam
Adam
-
- G-Major
- Posts: 812
- Joined: Sun Mar 19, 2006 10:54 am
- Location: Citrus Heights, Ca.
Re: Junk frame? Need metal motor mounts
Why don't you just buy a new set from RFJP?
-
- G-Major General
- Posts: 2570
- Joined: Thu Mar 09, 2006 10:54 am
- Location: Colorado
- Contact:
Re: Junk frame? Need metal motor mounts
To all: I thank you all for your responses. I found a set and am slowly getting off the old mounts and replacing these!!
Thanks again!!
Thanks again!!
Who is online
Users browsing this forum: No registered users and 37 guests