After getting told basically the same thing from 3 different hydraulic shops about the 3/16" flexible fuel lines that are like this one pictured I have a question for 4 cyl. mule restorers. What did you do for the flexible line? I have been told that no one makes the ends anymore because of liability issues of having the same fitting size as brake lines. I'm working on both models and I need to source something to use on the first model from the fuel pump to carburetor. On the second model I need the lines that go in the carburetor well and the line from the fuel pump to bulk head fitting on the carburetor well. John Emery is looking for me, but it doesn't sound promising plus I would like to use a rubber that will survive with ethanol. I haven't even been able to find any barbed ends for 3/16" hose if I decided just to use straight hose. So I'm wondering if anyone has came up with a solution to this problem.
Thanks,
Lance Miller
M274-M274A1 Flexible fuel lines
- LANCE MILLER
- G-Sergeant Major
- Posts: 151
- Joined: Tue Jun 28, 2005 8:24 am
- Location: Ohio
-
- G-First Lieutenant
- Posts: 646
- Joined: Mon May 14, 2007 5:36 pm
- Location: Georgia
- Contact:
Re: M274-M274A1 Flexible fuel lines
Lance
You can remove the crimp fitting from the original ends and go to your local welding shop they should have crimp sleeves for Oxy-Act hoses. I will take pics in the morning of the sleeves and crimping tool I have and Post.
As for Ethanol resistance fuel line ask at the Auto Parts store about its composition. Buna-N and Viton seem to be the choice for Ethanol Resistant compounds.
If possible stay away from Ethanol fuel I use Non Ethanol fuel with 2 oz of Sta-Bil per 5 gal.
Check brake line specs and see if it will resist Gasoline that may be the closest you get to making it look original.
Flexible copper tubing may also work as a crimping sleeve the pump produces less than 6 psi so it should be easy to seal.
My Ford 801 Diesel uses a rubber hose from the filter to the Injector pump.
You can remove the crimp fitting from the original ends and go to your local welding shop they should have crimp sleeves for Oxy-Act hoses. I will take pics in the morning of the sleeves and crimping tool I have and Post.
As for Ethanol resistance fuel line ask at the Auto Parts store about its composition. Buna-N and Viton seem to be the choice for Ethanol Resistant compounds.
If possible stay away from Ethanol fuel I use Non Ethanol fuel with 2 oz of Sta-Bil per 5 gal.
Check brake line specs and see if it will resist Gasoline that may be the closest you get to making it look original.
Flexible copper tubing may also work as a crimping sleeve the pump produces less than 6 psi so it should be easy to seal.
My Ford 801 Diesel uses a rubber hose from the filter to the Injector pump.
Mules are my passion
www.m274armymules.com
www.m274armymules.com
- LANCE MILLER
- G-Sergeant Major
- Posts: 151
- Joined: Tue Jun 28, 2005 8:24 am
- Location: Ohio
Re: M274-M274A1 Flexible fuel lines
Thanks for the reply. I have do problem finding the hose, it's the 3/16" fittings for the ends that's the problem. Plus I haven't found an independent shop to make them up. No hydraulic shops around my area will make them because of liability reasons. It all has to do with the size being brake line size. I'm just going to use 1/4" hose and barbed fittings I think.
-
- Sergeant Major of the Gee
- Posts: 324
- Joined: Mon Oct 12, 2009 7:18 pm
- Location: Eagle, Idaho U.S.A.
Re: M274-M274A1 Flexible fuel lines
While not completely stock in appearance something like this might be tolerable?
-3 or 3/16th's isn't really an option other than Teflon lined brake line. But if you step up to -4 or 1/4" you just get a hose end fitting to replicate what you have? I searched for black thinking that would be your preference but if not there will be many more options.
https://www.summitracing.com/search/dep ... an%20black
These are some of the hose ends you can get. The search tool is very powerful but I don't really know what type of threads, etc are on the ends of your hoses. There's thousands on this website so just be tenacious with the search function or their customer service is stellar so maybe you could just call?
https://www.summitracing.com/search/dep ... =Ascending
-3 or 3/16th's isn't really an option other than Teflon lined brake line. But if you step up to -4 or 1/4" you just get a hose end fitting to replicate what you have? I searched for black thinking that would be your preference but if not there will be many more options.
https://www.summitracing.com/search/dep ... an%20black
These are some of the hose ends you can get. The search tool is very powerful but I don't really know what type of threads, etc are on the ends of your hoses. There's thousands on this website so just be tenacious with the search function or their customer service is stellar so maybe you could just call?
https://www.summitracing.com/search/dep ... =Ascending
- LANCE MILLER
- G-Sergeant Major
- Posts: 151
- Joined: Tue Jun 28, 2005 8:24 am
- Location: Ohio
Re: M274-M274A1 Flexible fuel lines
Thanks, I was at Summit on Monday. Those an ends are just too large to fit in the area of the carburetor well. I think I know what I'm going to use now. I was just hoping that someone had luck getting original size lines made up.
- LANCE MILLER
- G-Sergeant Major
- Posts: 151
- Joined: Tue Jun 28, 2005 8:24 am
- Location: Ohio
Re: M274-M274A1 Flexible fuel lines
John Emery came through on fuel lines. 4 Cylinder owners might want to get spares while he still has them. Lance Miller. http://www.lancemillermv.com
Who is online
Users browsing this forum: No registered users and 43 guests