Added another mule
-
- G-Sergeant
- Posts: 38
- Joined: Wed May 06, 2015 8:44 am
- Location:
Added another mule
Just rescued another mule USMC 70109 S/N 633 Reg#370109 Del date 2/70. I am in need of the right main frame tube if any out there. Emery only has the 4 cyl tubes.
-
- G-Lieutenant General
- Posts: 5820
- Joined: Wed Dec 18, 2002 11:00 am
- Location:
Re: Added another mule
congratulations! I added your numbers to my list, Thanks! Good luck on the frame tube, that's another part that is getting hard to find. You might talk to a local fab/machine shop about making a new tube using your old tube's ends.
-
- G-First Lieutenant
- Posts: 646
- Joined: Mon May 14, 2007 5:36 pm
- Location: Georgia
- Contact:
Re: Added another mule
The 4cyl tubes on the M274 and M274-A1 will work but you will have to add spacers to the interior bed supports arrow points to the back spacer. Not original for your A5? but will work.
Pic below is from Chuck W in Post Mule serial # viewtopic.php?f=148&t=281230
Pic below is from Chuck W in Post Mule serial # viewtopic.php?f=148&t=281230
Mules are my passion
www.m274armymules.com
www.m274armymules.com
-
- G-Second Lieutenant
- Posts: 568
- Joined: Sun Oct 13, 2013 5:39 pm
- Location:
Re: Added another mule
I may have one. I'll check an let you know.
HoustonMule wrote:Just rescued another mule USMC 70109 S/N 633 Reg#370109 Del date 2/70. I am in need of the right main frame tube if any out there. Emery only has the 4 cyl tubes.
-
- G-Sergeant Major
- Posts: 157
- Joined: Fri Dec 06, 2013 5:31 pm
- Location:
Re: Added another mule
If Gunslinger doesn't have a frame tube for you, we should have one in the boneyard. You can contact me thru this site, or 309-242-45zero1, or arvintga(at)gmail(dot)com. Trent
- Attachments
-
- image.jpeg (134.97 KiB) Viewed 1408 times
-
- G-Sergeant
- Posts: 38
- Joined: Wed May 06, 2015 8:44 am
- Location:
Re: Added another mule
Thanks for all the responses. I need to take time and make a list of other needed items as well as check the condition of the other tube frame. Mule was around salty atmosphere so some rust issues on metal items. Aluminum parts survived. Estimated cost of used tubes???
-
- G-Second Lieutenant
- Posts: 568
- Joined: Sun Oct 13, 2013 5:39 pm
- Location:
Re: Added another mule
I would go ahead an take tga on his offer for the frame tube. These are great guys to deal with.
Who is online
Users browsing this forum: No registered users and 47 guests