Slat grill correct ign. switch

Joe Gopan · Post by **Joe Gopan** » Sat May 02, 2015 4:41 am

A word of caution, some GI keyed switch cylinders have springs that can drop out. The Delco has such a spring ,and you will probably not see it go.
Biggest problem is that the cylinders are not interchangeable between brands and there are no suppliers that maintain the H-700 cylinder kits for GI Issue switches. 70 years takes a toll on some parts.

wo2jeeper · Post by **wo2jeeper** » Sat May 02, 2015 1:46 pm

Sure there are no suppliers ? I know one

Joe Gopan · Post by **Joe Gopan** » Sat May 02, 2015 2:09 pm

You know just "one"? Speak up, that's one more than most of us know of. There are some who would like to convert to correct and H-700 keyed switches.

wo2jeeper · Post by **wo2jeeper** » Sun May 03, 2015 7:12 am

this cilinder ?

To do this trick ?

With this lock ?

Joe Gopan · Post by **Joe Gopan** » Sun May 03, 2015 9:14 am

Are you the supplier?

wo2jeeper · Post by **wo2jeeper** » Sun May 03, 2015 11:38 am

Need one then ? Trades only

Ian Fawbert · Post by **Ian Fawbert** » Sun May 03, 2015 4:10 pm

Hi wo2jeeper,

Can you please post a clearer photo of the keyed barrel you put in that switch? Just trying to figure out if the one i am getting (in the post!) is the same as the one which, based on your pics is known will fit.

Cheers,
Ian.

wo2jeeper · Post by **wo2jeeper** » Mon May 04, 2015 9:07 am

Hi Ian, I am not taking it out again. You can post a pic of yours and I try to tell if yours is correct for the job.

G503 Military Vehicle Message Forums

Slat grill correct ign. switch

Re: Slat grill correct ign. switch

Re: Slat grill correct ign. switch

Re: Slat grill correct ign. switch

Re: Slat grill correct ign. switch

Re: Slat grill correct ign. switch

Re: Slat grill correct ign. switch

Re: Slat grill correct ign. switch

Re: Slat grill correct ign. switch

Who is online