TR20 5/16 bolts-reproduction available

Nov. 18, 1941 - MB100001 thru Mar. 6, 1942 - MB125809 NO EBAY or COMMERCIAL SALES.
User avatar
marc belanger
G-Sergeant Major
G-Sergeant Major
Posts: 192
Joined: Wed Nov 23, 2005 1:56 pm
Location: Longueuil, Quebec, Canada

TR20 5/16 bolts-reproduction available

Post by marc belanger » Wed Oct 22, 2014 5:19 pm

Image
For the first time available, accurate reproduction TR20 bolts, made in North America, 5/16-18 NC-5/8 long, and 3/4 long, heat treated to grade 5. Natural black finish. Correct dimensions including head thickness.
$2.00 USD each. Price reduced for large quantity. pm me for quote for large quantity and for shipping cost.
There are over 56 of the 5/8 length and 42 of 3/4 length per jeep. Most of them are visible. These bolts will bring of touch class to your 1941-1942 Willys MB.


frenchdevil
G-Staff Sergeant
G-Staff Sergeant
Posts: 61
Joined: Fri Nov 10, 2006 10:18 am
Location:
Contact:

Re: TR20 5/16 bolts-reproduction available

Post by frenchdevil » Wed Oct 22, 2014 10:37 pm

:D
PM

Charlie S.
G-Colonel
G-Colonel
Posts: 1267
Joined: Thu Mar 31, 2005 11:18 am
Location: Buenos Aires, República Argentina

Re: TR20 5/16 bolts-reproduction available

Post by Charlie S. » Sat Oct 25, 2014 7:59 am

Hi Marc.
Congrats for those TR20 bolts.
Could you remember me where exactly those bolts goes in the Slats ?
Tks a lot in advance for your reply.
Slat Grill #124991 - March 1942
CJ-2A #114467 - July 1947
Spen Model S 1948

User avatar
marc belanger
G-Sergeant Major
G-Sergeant Major
Posts: 192
Joined: Wed Nov 23, 2005 1:56 pm
Location: Longueuil, Quebec, Canada

Re: TR20 5/16 bolts-reproduction available

Post by marc belanger » Sat Oct 25, 2014 2:33 pm

Charlie
The 5/16-18-NC x 5/8 have Willys p/n: 51485....correction...there are 70 of them listed in tm-10-1186
To list only e few.
The 5/8 long were used for: body handles, foor rest, seats to floor, windshield pivot brackets to cowl, radiator guard Hood liner-center to radiator guard top, radiator guard to front fender, spare Wheel support bracket assy to back panel, top bow pivot bracket to body, hand rail front, headlamp support hinge to radiator guard, filter bracket to dash, engine pan, fan pulley shield,

51523....correction...there are 33 of them listed in tm-10-1186... driver seat to floor, front fender to cowl, tie bar and shield to master cylinder, axle housing covers, transfercase bottom cover , transfer case rear cover.
Hope this help.
THESE BOLTS WERE USED TILL MID-1942....not only for slat
Marc

Jamie M
Sergeant Major of the Gee
Sergeant Major of the Gee
Posts: 320
Joined: Thu Feb 03, 2005 6:41 pm
Location: Sherwood Park, Alberta, Canada

Re: TR20 5/16 bolts-reproduction available

Post by Jamie M » Sun Oct 26, 2014 2:33 pm

Thanks for the bolts Marc. I have been waiting a long time for quality TR20 bolts for my slat grill and these are superb and reasonably priced.
1943 MB USMC contract
1942 Slat Grille Canadian contract
1943 WC56 Command Car

parcours
Sergeant Major of the Gee
Sergeant Major of the Gee
Posts: 439
Joined: Wed Jul 09, 2014 8:04 pm
Location: So. California USA

Re: TR20 5/16 bolts-reproduction available

Post by parcours » Wed Nov 12, 2014 5:26 pm

PM Sent

User avatar
marc belanger
G-Sergeant Major
G-Sergeant Major
Posts: 192
Joined: Wed Nov 23, 2005 1:56 pm
Location: Longueuil, Quebec, Canada

Re: TR20 5/16 bolts-reproduction available

Post by marc belanger » Thu Nov 13, 2014 2:59 am

Juan
First, do you have a TM for the period of your jeep?, if positive, check for the Willys part numbers 51485 and 51523

The 5/16-18-NC x 5/8 have Willys p/n: 51485.there are 70 of them listed in tm-10-1186
To list only e few.
The 5/8 long were used for: body handles, foor rest, seats to floor, windshield pivot brackets to cowl, radiator guard Hood liner-center to radiator guard top, radiator guard to front fender, spare Wheel support bracket assy to back panel, top bow pivot bracket to body, hand rail front, headlamp support hinge to radiator guard, filter bracket to dash, engine pan, fan pulley shield,

51523.there are 33 of them listed in tm-10-1186... driver seat to floor, front fender to cowl, tie bar and shield to master cylinder, axle housing covers, transfercase bottom cover , transfer case rear cover.

Hope this help.
Marc

Jean Georges
G-Command Sergeant Major
G-Command Sergeant Major
Posts: 203
Joined: Mon Jun 02, 2008 4:25 am
Location: france
Contact:

Re: TR20 5/16 bolts-reproduction available

Post by Jean Georges » Sun Nov 16, 2014 12:46 pm

Hello
Great job i appreciate the repro you did
pls make me an offer per quantity 100 and more
jean.georges@wanadoo.fr
thanks
jean
jeep gp ford 14949
jeep vep ford 6088
jeep gpa ford amphibious
M8 ford
dodge wc 56 command car
dodge wc 53 carry all
Gmc dukw amphibious
Gmc 352 shelter
Gmc 353
Sherman M 4 A1
Stuart M3
Chaffee M24
Hellcat M 1
Harley wla 41
Harley wla 43
Harley XA

fordm8
G-Staff Sergeant
G-Staff Sergeant
Posts: 63
Joined: Tue Jun 13, 2006 10:56 am
Location:

Re: TR20 5/16 bolts-reproduction available

Post by fordm8 » Mon Nov 17, 2014 6:17 am

Hello Marc,

I got my bolts today, very good job, thanks. Will you also make a run of the the 1/4" bolts?

Greetings

Ryck

User avatar
marc belanger
G-Sergeant Major
G-Sergeant Major
Posts: 192
Joined: Wed Nov 23, 2005 1:56 pm
Location: Longueuil, Quebec, Canada

Re: TR20 5/16 bolts-reproduction available

Post by marc belanger » Mon Nov 17, 2014 8:46 am

Ryck
Thanks for the positive evaluation.
I may consider to produce the 1/4 if tere is a demand.
Keep in mind, producing some thousands represent high expenses of tooling and production fees.
Regards
Marc

User avatar
lt.luke
G-General
G-General
Posts: 9899
Joined: Fri May 09, 2003 7:56 am
Location: Oklahoma
Contact:

Re: TR20 5/16 bolts-reproduction available

Post by lt.luke » Mon Nov 17, 2014 11:33 am

Are there any longer/larger TR/20 bolts, about the size of head bolts, correct for the jeep? Thanks, and sorry if this is considered a hijack.

User avatar
marc belanger
G-Sergeant Major
G-Sergeant Major
Posts: 192
Joined: Wed Nov 23, 2005 1:56 pm
Location: Longueuil, Quebec, Canada

Re: TR20 5/16 bolts-reproduction available

Post by marc belanger » Mon Nov 17, 2014 2:29 pm

luke
The bolts are of exact dimension, material and temper based on original WWII TR20 bolts.
Still available.
Marc

User avatar
lt.luke
G-General
G-General
Posts: 9899
Joined: Fri May 09, 2003 7:56 am
Location: Oklahoma
Contact:

Re: TR20 5/16 bolts-reproduction available

Post by lt.luke » Mon Nov 17, 2014 4:59 pm

marc belanger wrote:luke
The bolts are of exact dimension, material and temper based on original WWII TR20 bolts.
Still available.
Marc
I'll PM you

Houtsch Marc
G-Sergeant First Class
G-Sergeant First Class
Posts: 77
Joined: Tue Mar 01, 2005 5:32 am
Location:

Re: TR20 5/16 bolts-reproduction available

Post by Houtsch Marc » Tue Nov 18, 2014 5:41 am

Bonjour Marc:

Bolts received, great work, should be perfect for the final touch, many thanks :D
Cheer's Marc

Stereo11
G-Staff Sergeant
G-Staff Sergeant
Posts: 63
Joined: Sun Dec 22, 2013 8:51 pm
Location: Victoria, Australia

Re: TR20 5/16 bolts-reproduction available

Post by Stereo11 » Tue Nov 18, 2014 12:52 pm

Bolts arrived , thank you. Awesome quality. Very happy... :D


Post Reply

Return to “Slat Grill, early Willys MB”

Who is online

Users browsing this forum: No registered users and 43 guests