TR20 5/16 bolts-reproduction available
- marc belanger
- G-Sergeant Major
- Posts: 192
- Joined: Wed Nov 23, 2005 1:56 pm
- Location: Longueuil, Quebec, Canada
TR20 5/16 bolts-reproduction available
For the first time available, accurate reproduction TR20 bolts, made in North America, 5/16-18 NC-5/8 long, and 3/4 long, heat treated to grade 5. Natural black finish. Correct dimensions including head thickness.
$2.00 USD each. Price reduced for large quantity. pm me for quote for large quantity and for shipping cost.
There are over 56 of the 5/8 length and 42 of 3/4 length per jeep. Most of them are visible. These bolts will bring of touch class to your 1941-1942 Willys MB.
-
- G-Staff Sergeant
- Posts: 61
- Joined: Fri Nov 10, 2006 10:18 am
- Location:
- Contact:
-
- G-Colonel
- Posts: 1267
- Joined: Thu Mar 31, 2005 11:18 am
- Location: Buenos Aires, República Argentina
Re: TR20 5/16 bolts-reproduction available
Hi Marc.
Congrats for those TR20 bolts.
Could you remember me where exactly those bolts goes in the Slats ?
Tks a lot in advance for your reply.
Congrats for those TR20 bolts.
Could you remember me where exactly those bolts goes in the Slats ?
Tks a lot in advance for your reply.
Slat Grill #124991 - March 1942
CJ-2A #114467 - July 1947
Spen Model S 1948
CJ-2A #114467 - July 1947
Spen Model S 1948
- marc belanger
- G-Sergeant Major
- Posts: 192
- Joined: Wed Nov 23, 2005 1:56 pm
- Location: Longueuil, Quebec, Canada
Re: TR20 5/16 bolts-reproduction available
Charlie
The 5/16-18-NC x 5/8 have Willys p/n: 51485....correction...there are 70 of them listed in tm-10-1186
To list only e few.
The 5/8 long were used for: body handles, foor rest, seats to floor, windshield pivot brackets to cowl, radiator guard Hood liner-center to radiator guard top, radiator guard to front fender, spare Wheel support bracket assy to back panel, top bow pivot bracket to body, hand rail front, headlamp support hinge to radiator guard, filter bracket to dash, engine pan, fan pulley shield,
51523....correction...there are 33 of them listed in tm-10-1186... driver seat to floor, front fender to cowl, tie bar and shield to master cylinder, axle housing covers, transfercase bottom cover , transfer case rear cover.
Hope this help.
THESE BOLTS WERE USED TILL MID-1942....not only for slat
Marc
The 5/16-18-NC x 5/8 have Willys p/n: 51485....correction...there are 70 of them listed in tm-10-1186
To list only e few.
The 5/8 long were used for: body handles, foor rest, seats to floor, windshield pivot brackets to cowl, radiator guard Hood liner-center to radiator guard top, radiator guard to front fender, spare Wheel support bracket assy to back panel, top bow pivot bracket to body, hand rail front, headlamp support hinge to radiator guard, filter bracket to dash, engine pan, fan pulley shield,
51523....correction...there are 33 of them listed in tm-10-1186... driver seat to floor, front fender to cowl, tie bar and shield to master cylinder, axle housing covers, transfercase bottom cover , transfer case rear cover.
Hope this help.
THESE BOLTS WERE USED TILL MID-1942....not only for slat
Marc
-
- Sergeant Major of the Gee
- Posts: 320
- Joined: Thu Feb 03, 2005 6:41 pm
- Location: Sherwood Park, Alberta, Canada
Re: TR20 5/16 bolts-reproduction available
Thanks for the bolts Marc. I have been waiting a long time for quality TR20 bolts for my slat grill and these are superb and reasonably priced.
1943 MB USMC contract
1942 Slat Grille Canadian contract
1943 WC56 Command Car
1942 Slat Grille Canadian contract
1943 WC56 Command Car
-
- Sergeant Major of the Gee
- Posts: 439
- Joined: Wed Jul 09, 2014 8:04 pm
- Location: So. California USA
- marc belanger
- G-Sergeant Major
- Posts: 192
- Joined: Wed Nov 23, 2005 1:56 pm
- Location: Longueuil, Quebec, Canada
Re: TR20 5/16 bolts-reproduction available
Juan
First, do you have a TM for the period of your jeep?, if positive, check for the Willys part numbers 51485 and 51523
The 5/16-18-NC x 5/8 have Willys p/n: 51485.there are 70 of them listed in tm-10-1186
To list only e few.
The 5/8 long were used for: body handles, foor rest, seats to floor, windshield pivot brackets to cowl, radiator guard Hood liner-center to radiator guard top, radiator guard to front fender, spare Wheel support bracket assy to back panel, top bow pivot bracket to body, hand rail front, headlamp support hinge to radiator guard, filter bracket to dash, engine pan, fan pulley shield,
51523.there are 33 of them listed in tm-10-1186... driver seat to floor, front fender to cowl, tie bar and shield to master cylinder, axle housing covers, transfercase bottom cover , transfer case rear cover.
Hope this help.
Marc
First, do you have a TM for the period of your jeep?, if positive, check for the Willys part numbers 51485 and 51523
The 5/16-18-NC x 5/8 have Willys p/n: 51485.there are 70 of them listed in tm-10-1186
To list only e few.
The 5/8 long were used for: body handles, foor rest, seats to floor, windshield pivot brackets to cowl, radiator guard Hood liner-center to radiator guard top, radiator guard to front fender, spare Wheel support bracket assy to back panel, top bow pivot bracket to body, hand rail front, headlamp support hinge to radiator guard, filter bracket to dash, engine pan, fan pulley shield,
51523.there are 33 of them listed in tm-10-1186... driver seat to floor, front fender to cowl, tie bar and shield to master cylinder, axle housing covers, transfercase bottom cover , transfer case rear cover.
Hope this help.
Marc
-
- G-Command Sergeant Major
- Posts: 203
- Joined: Mon Jun 02, 2008 4:25 am
- Location: france
- Contact:
Re: TR20 5/16 bolts-reproduction available
Hello
Great job i appreciate the repro you did
pls make me an offer per quantity 100 and more
jean.georges@wanadoo.fr
thanks
jean
Great job i appreciate the repro you did
pls make me an offer per quantity 100 and more
jean.georges@wanadoo.fr
thanks
jean
jeep gp ford 14949
jeep vep ford 6088
jeep gpa ford amphibious
M8 ford
dodge wc 56 command car
dodge wc 53 carry all
Gmc dukw amphibious
Gmc 352 shelter
Gmc 353
Sherman M 4 A1
Stuart M3
Chaffee M24
Hellcat M 1
Harley wla 41
Harley wla 43
Harley XA
jeep vep ford 6088
jeep gpa ford amphibious
M8 ford
dodge wc 56 command car
dodge wc 53 carry all
Gmc dukw amphibious
Gmc 352 shelter
Gmc 353
Sherman M 4 A1
Stuart M3
Chaffee M24
Hellcat M 1
Harley wla 41
Harley wla 43
Harley XA
-
- G-Staff Sergeant
- Posts: 63
- Joined: Tue Jun 13, 2006 10:56 am
- Location:
Re: TR20 5/16 bolts-reproduction available
Hello Marc,
I got my bolts today, very good job, thanks. Will you also make a run of the the 1/4" bolts?
Greetings
Ryck
I got my bolts today, very good job, thanks. Will you also make a run of the the 1/4" bolts?
Greetings
Ryck
- marc belanger
- G-Sergeant Major
- Posts: 192
- Joined: Wed Nov 23, 2005 1:56 pm
- Location: Longueuil, Quebec, Canada
Re: TR20 5/16 bolts-reproduction available
Ryck
Thanks for the positive evaluation.
I may consider to produce the 1/4 if tere is a demand.
Keep in mind, producing some thousands represent high expenses of tooling and production fees.
Regards
Marc
Thanks for the positive evaluation.
I may consider to produce the 1/4 if tere is a demand.
Keep in mind, producing some thousands represent high expenses of tooling and production fees.
Regards
Marc
- lt.luke
- G-General
- Posts: 9899
- Joined: Fri May 09, 2003 7:56 am
- Location: Oklahoma
- Contact:
Re: TR20 5/16 bolts-reproduction available
Are there any longer/larger TR/20 bolts, about the size of head bolts, correct for the jeep? Thanks, and sorry if this is considered a hijack.
Luke Sparks
MAJ (R), USA
GPW 12078 http://g503.com/forums/viewtopic.php?f=95&t=102532
https://www.homesteadersfinest.com/
MAJ (R), USA
GPW 12078 http://g503.com/forums/viewtopic.php?f=95&t=102532
https://www.homesteadersfinest.com/
- marc belanger
- G-Sergeant Major
- Posts: 192
- Joined: Wed Nov 23, 2005 1:56 pm
- Location: Longueuil, Quebec, Canada
Re: TR20 5/16 bolts-reproduction available
luke
The bolts are of exact dimension, material and temper based on original WWII TR20 bolts.
Still available.
Marc
The bolts are of exact dimension, material and temper based on original WWII TR20 bolts.
Still available.
Marc
- lt.luke
- G-General
- Posts: 9899
- Joined: Fri May 09, 2003 7:56 am
- Location: Oklahoma
- Contact:
Re: TR20 5/16 bolts-reproduction available
I'll PM youmarc belanger wrote:luke
The bolts are of exact dimension, material and temper based on original WWII TR20 bolts.
Still available.
Marc
Luke Sparks
MAJ (R), USA
GPW 12078 http://g503.com/forums/viewtopic.php?f=95&t=102532
https://www.homesteadersfinest.com/
MAJ (R), USA
GPW 12078 http://g503.com/forums/viewtopic.php?f=95&t=102532
https://www.homesteadersfinest.com/
-
- G-Sergeant First Class
- Posts: 77
- Joined: Tue Mar 01, 2005 5:32 am
- Location:
Re: TR20 5/16 bolts-reproduction available
Bonjour Marc:
Bolts received, great work, should be perfect for the final touch, many thanks
Cheer's Marc
Bolts received, great work, should be perfect for the final touch, many thanks
Cheer's Marc
-
- G-Staff Sergeant
- Posts: 63
- Joined: Sun Dec 22, 2013 8:51 pm
- Location: Victoria, Australia
Re: TR20 5/16 bolts-reproduction available
Bolts arrived , thank you. Awesome quality. Very happy...
Who is online
Users browsing this forum: No registered users and 50 guests