WANTED EARLY WINDSHIELD push button studs
-
- G-Private First Class
- Posts: 7
- Joined: Tue Jan 29, 2013 8:47 am
- Location: United Kingdom
Re: WANTED EARLY WINDSHIELD push button studs
Correction to my last.... I found a new battery for my caliper and the screw length comes out at 0.625 inch or 5/8ths.
Sorry, I have been living in "Europe" for too long and my English imperial units are a bit rusty
Sorry, I have been living in "Europe" for too long and my English imperial units are a bit rusty
James Still
MB112054 DOD 1-16-42
MB112054 DOD 1-16-42
- Viking27
- G-Brigadier General
- Posts: 2079
- Joined: Mon Feb 24, 2003 9:39 pm
- Location: Holland
Re: WANTED EARLY WINDSHIELD push button studs
Guys, I have NOS early studs. Will take photos and measure them in the weekend and post for comparison.
Not for sale, sorry.
Reg
Hinrik
Not for sale, sorry.
Reg
Hinrik
Hinrik Steinsson
Ford GP 9519
Proud member of 50 Shades of Green group
Ford GP 9519
Proud member of 50 Shades of Green group
- Viking27
- G-Brigadier General
- Posts: 2079
- Joined: Mon Feb 24, 2003 9:39 pm
- Location: Holland
Re: WANTED EARLY WINDSHIELD push button studs
Here are details on the NOS studs I have.
Total length: 29.1 mm or ca. 1 inch 9/64
Hex Head width: 12.6 mm or ca. 1/2 inch
Shoulder dia: 7.9 mm or ca. 5/16 inch
Head (top) length: 14 mm or ca. 9/16 inch
Screw length: 14.9 mm or ca. 19/32 inch
screw dia: 5.3 mm or ca. 7/32 inch.
Hinrik
Total length: 29.1 mm or ca. 1 inch 9/64
Hex Head width: 12.6 mm or ca. 1/2 inch
Shoulder dia: 7.9 mm or ca. 5/16 inch
Head (top) length: 14 mm or ca. 9/16 inch
Screw length: 14.9 mm or ca. 19/32 inch
screw dia: 5.3 mm or ca. 7/32 inch.
Hinrik
Hinrik Steinsson
Ford GP 9519
Proud member of 50 Shades of Green group
Ford GP 9519
Proud member of 50 Shades of Green group
-
- G-Command Sergeant Major
- Posts: 235
- Joined: Mon Dec 16, 2002 10:35 pm
- Location: Hughson, Ca.
Re: WANTED EARLY WINDSHIELD push button studs
Hinrik,
Based on your photo's, you are without a doubt, the owner of more of the most sought after and hardest to find original Slat Grill Restoration Part. I had long thought that distinction belonged to the "Hinged Tobe Filterette" but after having found Four in as many months, I am now convinced it is the "A-2924 Windshied Curtain Fastener (Top To Windshield).
I received my package from Restoration Specialties & Supplies containing one (1) part #63313 and one (1) part #63314. As I speculated in an earlier post, Part #63313 is an exact copy of my original. The only exception of course is #63313 has a chrome finish and the tip where the threads start are slightly different. All the measurements are the same, I do not have a pretty digital caliper like Hinrik but my "Older than I am Starrett" is pretty accurate..
I have yet to master the ability to post photos but I will try again after I get some taken. It looks like all we need now is the recipe for the "Cold Gun Blueing Solution" and then we will have to figure out what the NEW "hardest to find original Slat Grill Restoration Part" will be..
Based on your photo's, you are without a doubt, the owner of more of the most sought after and hardest to find original Slat Grill Restoration Part. I had long thought that distinction belonged to the "Hinged Tobe Filterette" but after having found Four in as many months, I am now convinced it is the "A-2924 Windshied Curtain Fastener (Top To Windshield).
I received my package from Restoration Specialties & Supplies containing one (1) part #63313 and one (1) part #63314. As I speculated in an earlier post, Part #63313 is an exact copy of my original. The only exception of course is #63313 has a chrome finish and the tip where the threads start are slightly different. All the measurements are the same, I do not have a pretty digital caliper like Hinrik but my "Older than I am Starrett" is pretty accurate..
I have yet to master the ability to post photos but I will try again after I get some taken. It looks like all we need now is the recipe for the "Cold Gun Blueing Solution" and then we will have to figure out what the NEW "hardest to find original Slat Grill Restoration Part" will be..
-
- G-First Lieutenant
- Posts: 607
- Joined: Mon Aug 27, 2007 8:40 pm
- Location: Wheeling, Illinois (Chicago area)
Re: WANTED EARLY WINDSHIELD push button studs
Not so fast Rick,Rick Daniel wrote: It looks like all we need now is the recipe for the "Cold Gun Blueing Solution" and then we will have to figure out what the NEW "hardest to find original Slat Grill Restoration Part" will be..
I just go off the phone with Barb from Restoration Specialties. I was trying to order 10 of the 63313. She said they were all out. We got to talking a little and I stated that I knew she had just recently had at least one (which was sent to you). She remembered, and commented that she had also sent you 63314. Sadly she said since it's an NOS part they have no idea of if or when they'll be back in stock. So even though we have "found" the part- none of us can actually "have" the part .
Chris
Chris Doran (ccdoran@hotmail.com)
GP 9671 (5-01-41)
Slat 103178 (12-12-41)
GPW 75591 (10-42)
Bantam T3-C 25038 (Early 48)
GP 9671 (5-01-41)
Slat 103178 (12-12-41)
GPW 75591 (10-42)
Bantam T3-C 25038 (Early 48)
-
- G-Command Sergeant Major
- Posts: 235
- Joined: Mon Dec 16, 2002 10:35 pm
- Location: Hughson, Ca.
Re: WANTED EARLY WINDSHIELD push button studs
Chris,
The very nice to talk to Barb just might be more shrewd of a BusinessWoman than I thought.
When I spoke with her I explained(MAYBE TO MUCH) about my quest for this part and how I had willingly paid $10
each for an original version. I was very clear with her that after comparing the two versions she was sending me and making a determination of which was closest to my original I would be ordering at least 20 or 30 of them. Barb gave me no indication she would not be able to fill my order.
Barb just might have figured out the $3.75 each she was charging was way less than she could get for them in the right place and the stock she had is now being relabeled and the purchase price raised accordingly?? It will be interesting to see if the next time she has the part in stock the price has gone up considerably more than what I paid??
If there is one good thing came out of this it would have to be that the two pieces I have are now worth more than what I paid for them..
The very nice to talk to Barb just might be more shrewd of a BusinessWoman than I thought.
When I spoke with her I explained(MAYBE TO MUCH) about my quest for this part and how I had willingly paid $10
each for an original version. I was very clear with her that after comparing the two versions she was sending me and making a determination of which was closest to my original I would be ordering at least 20 or 30 of them. Barb gave me no indication she would not be able to fill my order.
Barb just might have figured out the $3.75 each she was charging was way less than she could get for them in the right place and the stock she had is now being relabeled and the purchase price raised accordingly?? It will be interesting to see if the next time she has the part in stock the price has gone up considerably more than what I paid??
If there is one good thing came out of this it would have to be that the two pieces I have are now worth more than what I paid for them..
-
- Jeep Heaven
- Posts: 49841
- Joined: Sun Mar 02, 2008 12:37 pm
- Location: Proving Ground
Re: WANTED EARLY WINDSHIELD push button studs
Anyone manufacturing the windshield fastener hardware yet?
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
- Farrell Fox
- banned
- Posts: 4847
- Joined: Sat Jan 17, 2009 2:17 pm
- Location:
Re: WANTED EARLY WINDSHIELD push button studs
[Post Deleted By Author]
Last edited by Farrell Fox on Sat Oct 26, 2019 11:29 am, edited 1 time in total.
4th Tank Battalion, 4th Marine Division
M1A1 Main Battle Tank Mechanic
M88 Armored Vehicle Recovery Operator
AVLB Operator
M1A1 Main Battle Tank Mechanic
M88 Armored Vehicle Recovery Operator
AVLB Operator
-
- Jeep Heaven
- Posts: 49841
- Joined: Sun Mar 02, 2008 12:37 pm
- Location: Proving Ground
Re: WANTED EARLY WINDSHIELD push button studs
Are you the only WWII Jeep Canvas supplier who uses the correct configuration and I.D. Eyelets on the A-3216 Jeep Tarps?
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
-
- G-Command Sergeant Major
- Posts: 235
- Joined: Mon Dec 16, 2002 10:35 pm
- Location: Hughson, Ca.
Re: WANTED EARLY WINDSHIELD push button studs
Farrel,
I seem to remember you were going to have these made somewhere and make them available.
Did you make that happen??
Look forward to hearing back from you.
Thanks....
Rick Daniel
MBI0289I
I seem to remember you were going to have these made somewhere and make them available.
Did you make that happen??
Look forward to hearing back from you.
Thanks....
Rick Daniel
MBI0289I
- Farrell Fox
- banned
- Posts: 4847
- Joined: Sat Jan 17, 2009 2:17 pm
- Location:
Re: WANTED EARLY WINDSHIELD push button studs
[Post Deleted By Author]
Last edited by Farrell Fox on Sat Oct 26, 2019 11:30 am, edited 1 time in total.
4th Tank Battalion, 4th Marine Division
M1A1 Main Battle Tank Mechanic
M88 Armored Vehicle Recovery Operator
AVLB Operator
M1A1 Main Battle Tank Mechanic
M88 Armored Vehicle Recovery Operator
AVLB Operator
-
- G-Sergeant First Class
- Posts: 80
- Joined: Fri Dec 10, 2010 12:44 pm
- Location:
Re: WANTED EARLY WINDSHIELD push button studs
Interested !
41 Willys MB Slat Grill MB104167 DOD 12-16-41
- DanoZeman
- G-Second Lieutenant
- Posts: 572
- Joined: Wed Mar 18, 2009 5:42 am
- Location: Dover, Delaware
Re: WANTED EARLY WINDSHIELD push button studs
Would these work if they were blackened.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
United States Army Police Officer 2003-2009
MB 16Apr45 serial #435825
MB 16Apr45 serial #435825
- Farrell Fox
- banned
- Posts: 4847
- Joined: Sat Jan 17, 2009 2:17 pm
- Location:
Re: WANTED EARLY WINDSHIELD push button studs
[Post Deleted By Author]
Last edited by Farrell Fox on Sat Oct 26, 2019 11:30 am, edited 1 time in total.
4th Tank Battalion, 4th Marine Division
M1A1 Main Battle Tank Mechanic
M88 Armored Vehicle Recovery Operator
AVLB Operator
M1A1 Main Battle Tank Mechanic
M88 Armored Vehicle Recovery Operator
AVLB Operator
- DanoZeman
- G-Second Lieutenant
- Posts: 572
- Joined: Wed Mar 18, 2009 5:42 am
- Location: Dover, Delaware
Re: WANTED EARLY WINDSHIELD push button studs
Farrell Fox wrote:Yes indeed! However you'd need to strip the nickel plating off to get any sort of black on them.
They make blackening kits for nickel plated products. Used them multiple times on motorcycles bolts and parts.
Sent from my iPhone using Tapatalk
United States Army Police Officer 2003-2009
MB 16Apr45 serial #435825
MB 16Apr45 serial #435825
Who is online
Users browsing this forum: No registered users and 47 guests