Thank you for the suggestion! I'm just wanting rocker protection, not a step. So do these just get bolted through the rocker panel with backing plates, or should they bolt through the floor too?!
Thanks again,
Paul D
SF Runningboards
Moderator: Kurt Lesser
-
- Sergeant Major of the Gee
- Posts: 349
- Joined: Fri Apr 13, 2012 9:34 am
- Location: Rigby, Idaho
Re: SF Runningboards
1987 1038 WIP
Having fun, faking it till I make it! (Or break it)
Having fun, faking it till I make it! (Or break it)
- icentropy
- G-Command Sergeant Major
- Posts: 245
- Joined: Tue Jun 01, 2010 7:18 pm
- Location: Chesaw, WA
Re: SF Runningboards
They only bolt through the rocker panel. Here's the link to their website with better picsPablo66 wrote:Thank you for the suggestion! I'm just wanting rocker protection, not a step. So do these just get bolted through the rocker panel with backing plates, or should they bolt through the floor too?!
Thanks again,
Paul D
http://www.milsysgroup.com/product/accessories/M70-047
1994 AMG Hummer 6.5NA HMC4 (lots of stuff)
1997 AMG Hummer 6.5TD slantback(w/light performance upgrades)
Ibis Tek FPB, MASTC, ESC, and HID light bar (Sold)
WWW.ICENTROPY.COM
1997 AMG Hummer 6.5TD slantback(w/light performance upgrades)
Ibis Tek FPB, MASTC, ESC, and HID light bar (Sold)
WWW.ICENTROPY.COM
- icentropy
- G-Command Sergeant Major
- Posts: 245
- Joined: Tue Jun 01, 2010 7:18 pm
- Location: Chesaw, WA
Re: SF Runningboards
Each rail sells for $389.10 so $778.20 for the pair lead time is 60days. This is gov't pricing and lead time. Don't know if they'd sell to private parties.Urban Camo wrote:"Are the ones on this truck installed backwards or is it just me? " It's just you!!
No there mounted backwards. The right side is bolted to the left side and the left to the right side.
I saw that picture a while back. I wish MSG would answer there phone or even reply to an email now and again. But then I guess at what they get for stuff they don't need to sell much of it.
I have the part #'s around somewhere for the civi mounting brackets .
1994 AMG Hummer 6.5NA HMC4 (lots of stuff)
1997 AMG Hummer 6.5TD slantback(w/light performance upgrades)
Ibis Tek FPB, MASTC, ESC, and HID light bar (Sold)
WWW.ICENTROPY.COM
1997 AMG Hummer 6.5TD slantback(w/light performance upgrades)
Ibis Tek FPB, MASTC, ESC, and HID light bar (Sold)
WWW.ICENTROPY.COM
-
- Sergeant Major of the Gee
- Posts: 349
- Joined: Fri Apr 13, 2012 9:34 am
- Location: Rigby, Idaho
Re: SF Runningboards
I think I can make them for less than that!!icentropy wrote:Each rail sells for $389.10 so $778.20 for the pair lead time is 60days. This is gov't pricing and lead time. Don't know if they'd sell to private parties.Urban Camo wrote:"Are the ones on this truck installed backwards or is it just me? " It's just you!!
No there mounted backwards. The right side is bolted to the left side and the left to the right side.
I saw that picture a while back. I wish MSG would answer there phone or even reply to an email now and again. But then I guess at what they get for stuff they don't need to sell much of it.
I have the part #'s around somewhere for the civi mounting brackets .
1987 1038 WIP
Having fun, faking it till I make it! (Or break it)
Having fun, faking it till I make it! (Or break it)
- icentropy
- G-Command Sergeant Major
- Posts: 245
- Joined: Tue Jun 01, 2010 7:18 pm
- Location: Chesaw, WA
Re: SF Runningboards
I should hope so. Even made from aluminum I could beat that by a lot.Pablo66 wrote:I think I can make them for less than that!!icentropy wrote:Each rail sells for $389.10 so $778.20 for the pair lead time is 60days. This is gov't pricing and lead time. Don't know if they'd sell to private parties.Urban Camo wrote:"Are the ones on this truck installed backwards or is it just me? " It's just you!!
No there mounted backwards. The right side is bolted to the left side and the left to the right side.
I saw that picture a while back. I wish MSG would answer there phone or even reply to an email now and again. But then I guess at what they get for stuff they don't need to sell much of it.
I have the part #'s around somewhere for the civi mounting brackets .
1994 AMG Hummer 6.5NA HMC4 (lots of stuff)
1997 AMG Hummer 6.5TD slantback(w/light performance upgrades)
Ibis Tek FPB, MASTC, ESC, and HID light bar (Sold)
WWW.ICENTROPY.COM
1997 AMG Hummer 6.5TD slantback(w/light performance upgrades)
Ibis Tek FPB, MASTC, ESC, and HID light bar (Sold)
WWW.ICENTROPY.COM
Who is online
Users browsing this forum: No registered users and 45 guests