PCB / EESS / Smartstart S3
Moderator: Kurt Lesser
- 86humv
- G-Major General
- Posts: 2752
- Joined: Sat Aug 20, 2005 11:54 am
- Location: Texas
PCB / EESS / Smartstart S3
Here's some photo's...
First is an old LAU.....not used anymore.
PN 12379864
.
# 2..KDS green label...CR-2699.....burnt and corroded.
This old type can use any temp sensor or none.
First is an old LAU.....not used anymore.
PN 12379864
.
# 2..KDS green label...CR-2699.....burnt and corroded.
This old type can use any temp sensor or none.
Last edited by 86humv on Fri Feb 17, 2017 9:03 am, edited 1 time in total.
86 Hmmwv
Lots A parts
M101A2 trailer
M1102 trailer
Lots A parts
M101A2 trailer
M1102 trailer
- 86humv
- G-Major General
- Posts: 2752
- Joined: Sat Aug 20, 2005 11:54 am
- Location: Texas
Re: PCB / EESS / Smartstart S3 Inside view
This one...KDS yellow label 12469158-1
Can use KDS or Nartron temp sensor 12469158-2
# 2 is a Nartron yellow ...12469158-1....burnt up.
Uses temp sensor 12469158-2 also
Can use KDS or Nartron temp sensor 12469158-2
# 2 is a Nartron yellow ...12469158-1....burnt up.
Uses temp sensor 12469158-2 also
86 Hmmwv
Lots A parts
M101A2 trailer
M1102 trailer
Lots A parts
M101A2 trailer
M1102 trailer
- 86humv
- G-Major General
- Posts: 2752
- Joined: Sat Aug 20, 2005 11:54 am
- Location: Texas
Re: PCB / EESS / Smartstart S3
KDS Smart S3....socn6500435, cr-2700
Uses KDS or Nartron temp sensor 12469158-2
Nartron Smart S3...socn12480779
Uses temp sensor 12480779, and maybe KDS or Nartron temp sensor 12469158-2
Uses KDS or Nartron temp sensor 12469158-2
Nartron Smart S3...socn12480779
Uses temp sensor 12480779, and maybe KDS or Nartron temp sensor 12469158-2
Last edited by 86humv on Tue Dec 19, 2017 4:00 pm, edited 1 time in total.
86 Hmmwv
Lots A parts
M101A2 trailer
M1102 trailer
Lots A parts
M101A2 trailer
M1102 trailer
- 86humv
- G-Major General
- Posts: 2752
- Joined: Sat Aug 20, 2005 11:54 am
- Location: Texas
Re: PCB / EESS / Smartstart S3
KDS Silver label...1246779....uses temp sensor ...12338772 grey or black top.
Can't use KDS or Nartron temp sensor 12469158-2
Can't use KDS or Nartron temp sensor 12469158-2
Last edited by 86humv on Thu Feb 16, 2017 8:02 pm, edited 1 time in total.
86 Hmmwv
Lots A parts
M101A2 trailer
M1102 trailer
Lots A parts
M101A2 trailer
M1102 trailer
- 86humv
- G-Major General
- Posts: 2752
- Joined: Sat Aug 20, 2005 11:54 am
- Location: Texas
Re: PCB / EESS / Smartstart S3
Then there's these 3: SSI yellow label 12469158-1 uses Kds or Nartron temp sensor 12469158-2.
Its riveted together...not screws like the others on upper posts.
The Prestolite and Ametek are 12446779 and riveted also......these two use the Nartron
temp sensor 12338772 only.
Temp sensors....
Its riveted together...not screws like the others on upper posts.
The Prestolite and Ametek are 12446779 and riveted also......these two use the Nartron
temp sensor 12338772 only.
Temp sensors....
86 Hmmwv
Lots A parts
M101A2 trailer
M1102 trailer
Lots A parts
M101A2 trailer
M1102 trailer
- 86humv
- G-Major General
- Posts: 2752
- Joined: Sat Aug 20, 2005 11:54 am
- Location: Texas
Re: PCB / EESS / Smartstart S3
86 Hmmwv
Lots A parts
M101A2 trailer
M1102 trailer
Lots A parts
M101A2 trailer
M1102 trailer
-
- Sergeant Major of the Gee
- Posts: 265
- Joined: Sun Aug 20, 2017 9:13 am
- Location: Rock Hill SC
Re: PCB / EESS / Smartstart S3
Looks like great info. I will attempt to gain enough knowledge to digest more of it!
Hood parts arrived in great order, and just as advertised. Thank you!
Hood parts arrived in great order, and just as advertised. Thank you!
-
- G-Private First Class
- Posts: 8
- Joined: Wed Dec 08, 2010 7:02 am
- Location:
Re: PCB / EESS / Smartstart S3
KDS Smart Box CR-2700
Can someone take the cover off their KDS smartbox and measure this resistor for me? I know it is a lot to ask, but mine is burnt and these things are $500+. I need to replace but I have no way of knowing its resistance value.
Can someone take the cover off their KDS smartbox and measure this resistor for me? I know it is a lot to ask, but mine is burnt and these things are $500+. I need to replace but I have no way of knowing its resistance value.
-
- G-Private
- Posts: 4
- Joined: Sat Apr 28, 2018 4:49 am
- Location:
Re: PCB / EESS / Smartstart S3
Does anyone have the part number for the mosfets in the KDS Smart Start Systems (S3) box? I know the KDS black boxes use 75344G and I can see on what remains of the mosfets in my S3 box they have the 75344 but the numbers on top are different. The S3 box has 1H01AB above 75344 but the ones in the KDS black box say NF39AD over 75344G. Do all the boxes use the same mosfets? Just wanted to make sure I was ordering the right stuff before I ordered new mosfets.
-
- G-Staff Sergeant
- Posts: 58
- Joined: Sun Nov 13, 2016 5:47 pm
- Location: Rosamond, CA
Re: PCB / EESS / Smartstart S3
100 Ohms. Not trying to be flip... But not like old tube days down at the drug store changing dead TV tubes. There are 1000's of semi conductors in that over engineered box. (not a fan of the box) Might work and save a buck. Good luck shot-gunning parts that are fried.
Might want to take a look at the Zener in front of the heatsink left of power FET AND the ribbon cable has a bite taken out of it.
When the smoke comes out... things quit working.
CAMO
Might want to take a look at the Zener in front of the heatsink left of power FET AND the ribbon cable has a bite taken out of it.
When the smoke comes out... things quit working.
CAMO
Who is online
Users browsing this forum: No registered users and 64 guests