Location of lower rifle mount on floor
Moderator: Kurt Lesser
- icentropy
- G-Command Sergeant Major
- Posts: 245
- Joined: Tue Jun 01, 2010 7:18 pm
- Location: Chesaw, WA
Location of lower rifle mount on floor
Hi all. Been working on my truck this weekend. Got the second antenna mount installed on the drivers side sponsoon and I'm installing my m16 rifle mounts. Working on the passenger side right now. The upper one is pretty easy but the lower one is a bit tricky due to the fact my truck is/was a Hummer and the floor is all gummed up with sealant and a healthy layer of truckbed liner so rivets are buried. Could someone post a clear picture of the lower(butt) rifle mount so i can see exactly where it's supposed to be installed on the passenger floor pan.
Thanks in advance.
Thanks in advance.
1994 AMG Hummer 6.5NA HMC4 (lots of stuff)
1997 AMG Hummer 6.5TD slantback(w/light performance upgrades)
Ibis Tek FPB, MASTC, ESC, and HID light bar (Sold)
WWW.ICENTROPY.COM
1997 AMG Hummer 6.5TD slantback(w/light performance upgrades)
Ibis Tek FPB, MASTC, ESC, and HID light bar (Sold)
WWW.ICENTROPY.COM
-
- G-Captain
- Posts: 799
- Joined: Sat Feb 11, 2006 11:37 am
- Location: So.Cal
Re: Location of lower rifle mount on floor
Do you have the floor padding for the front driverside and passanger side.
If you do or if your planning on installing it it will help you place it in the correct space.
I'll try and take a few pictures.
UC
If you do or if your planning on installing it it will help you place it in the correct space.
I'll try and take a few pictures.
UC
- icentropy
- G-Command Sergeant Major
- Posts: 245
- Joined: Tue Jun 01, 2010 7:18 pm
- Location: Chesaw, WA
Re: Location of lower rifle mount on floor
Hi, I don't have the floor padding and don't plan on installing any. A picture of the lower mount showing it's location on the floor would be perfect. If you don't mind doing both sides (if you have a mount on the driver's side as well) I'd appreciate it.Urban Camo wrote:Do you have the floor padding for the front driverside and passanger side.
If you do or if your planning on installing it it will help you place it in the correct space.
I'll try and take a few pictures.
UC
It looked like it would be up on the angled surface but when mounted there the AR's 16.5" barrel isn't long enough and it clamps on the flash hider (and that's with the stock all the way open? so i'm thinking i'm guessing the location wrong.
1994 AMG Hummer 6.5NA HMC4 (lots of stuff)
1997 AMG Hummer 6.5TD slantback(w/light performance upgrades)
Ibis Tek FPB, MASTC, ESC, and HID light bar (Sold)
WWW.ICENTROPY.COM
1997 AMG Hummer 6.5TD slantback(w/light performance upgrades)
Ibis Tek FPB, MASTC, ESC, and HID light bar (Sold)
WWW.ICENTROPY.COM
- Haasino
- G-Master Sergeant
- Posts: 113
- Joined: Thu Mar 18, 2010 11:22 am
- Location: Pacific Northwest
Re: Location of lower rifle mount on floor
I've got a few photos I took a while back of the mounts in my truck... they were designed for 20" bbl M16A2 though, so an M4 won't fit in them. A civilian M4 w/16.5" bbl will fit with the stock extended, but will clamp just below the suppressor.
You can also use only the upper clamp and place the stock on the floor... that'll let it mount higher, but make dismounting a challenge.
You can also use only the upper clamp and place the stock on the floor... that'll let it mount higher, but make dismounting a challenge.
"Gentlemen, you can't fight in here! This is the War Room!"
You can trust me. I'm a arecrooman...
aircroomen...
airecrewmen...
I fly on planes.
You can trust me. I'm a arecrooman...
aircroomen...
airecrewmen...
I fly on planes.
-
- G-First Sergeant
- Posts: 131
- Joined: Mon Apr 18, 2011 1:36 pm
- Location: Philadelphia, Pennsylvania
Re: Location of lower rifle mount on floor
Nice truck Haasino.. BTW, the filter gauges are dirt cheap on ebay right now (noticed that hole in the console )
- Haasino
- G-Master Sergeant
- Posts: 113
- Joined: Thu Mar 18, 2010 11:22 am
- Location: Pacific Northwest
Re: Location of lower rifle mount on floor
Lol, thanks. Truck has undergone major changes since that 3rd pic... wasn't even titled or registered for street use when I took that. You'll see in pic #2 that the air restrictor gauge, starter lever, light switch, and horn button have all been replaced.JFS wrote:Nice truck Haasino.. BTW, the filter gauges are dirt cheap on ebay right now (noticed that hole in the console )
"Gentlemen, you can't fight in here! This is the War Room!"
You can trust me. I'm a arecrooman...
aircroomen...
airecrewmen...
I fly on planes.
You can trust me. I'm a arecrooman...
aircroomen...
airecrewmen...
I fly on planes.
-
- Sergeant Major of the Gee
- Posts: 349
- Joined: Fri Apr 13, 2012 9:34 am
- Location: Rigby, Idaho
Re: Location of lower rifle mount on floor
Hey,
Where can these mounts be found at? also, do they make mounts for the rear seats?
Thanks!
Paul D
Where can these mounts be found at? also, do they make mounts for the rear seats?
Thanks!
Paul D
1987 1038 WIP
Having fun, faking it till I make it! (Or break it)
Having fun, faking it till I make it! (Or break it)
- 86humv
- G-Major General
- Posts: 2754
- Joined: Sat Aug 20, 2005 11:54 am
- Location: Texas
Re: Location of lower rifle mount on floor
I have the ones for front, and some back parts.Pablo66 wrote:Hey,
Where can these mounts be found at? also, do they make mounts for the rear seats?
Thanks!
Paul D
86 Hmmwv
Lots A parts
M101A2 trailer
M1102 trailer
Lots A parts
M101A2 trailer
M1102 trailer
-
- Sergeant Major of the Gee
- Posts: 349
- Joined: Fri Apr 13, 2012 9:34 am
- Location: Rigby, Idaho
Re: Location of lower rifle mount on floor
86humv
I really should just send you a comprehensive list, since you seem to have everything I want!!
I'll send you a PM, as I have a couple of questions about the fording intake.
I really should just send you a comprehensive list, since you seem to have everything I want!!
I'll send you a PM, as I have a couple of questions about the fording intake.
1987 1038 WIP
Having fun, faking it till I make it! (Or break it)
Having fun, faking it till I make it! (Or break it)
- 86humv
- G-Major General
- Posts: 2754
- Joined: Sat Aug 20, 2005 11:54 am
- Location: Texas
Re: Location of lower rifle mount on floor
Here's the front parts and the back parts....
I forgot to put the other front butt plate bracket in photo.
The upper backseat parts are for the B pillar on a slant back. one extra is in photo.
The front parts that mount on the A pillar are adjustable.
I forgot to put the other front butt plate bracket in photo.
The upper backseat parts are for the B pillar on a slant back. one extra is in photo.
The front parts that mount on the A pillar are adjustable.
86 Hmmwv
Lots A parts
M101A2 trailer
M1102 trailer
Lots A parts
M101A2 trailer
M1102 trailer
- 86humv
- G-Major General
- Posts: 2754
- Joined: Sat Aug 20, 2005 11:54 am
- Location: Texas
-
- Sergeant Major of the Gee
- Posts: 349
- Joined: Fri Apr 13, 2012 9:34 am
- Location: Rigby, Idaho
Re: Location of lower rifle mount on floor
I want the front mounts...
And I'll need to figure out what else the rear mounts need to work in my rig
And I'll need to figure out what else the rear mounts need to work in my rig
1987 1038 WIP
Having fun, faking it till I make it! (Or break it)
Having fun, faking it till I make it! (Or break it)
- 86humv
- G-Major General
- Posts: 2754
- Joined: Sat Aug 20, 2005 11:54 am
- Location: Texas
Re: Location of lower rifle mount on floor
PM sentPablo66 wrote:I want the front mounts...
And I'll need to figure out what else the rear mounts need to work in my rig
86 Hmmwv
Lots A parts
M101A2 trailer
M1102 trailer
Lots A parts
M101A2 trailer
M1102 trailer
-
- G-Civilian
- Posts: 1
- Joined: Mon Feb 19, 2018 11:36 am
- Location:
Re: Location of lower rifle mount on floor
Hello 86humv
I am looking for the front bottom mount you show a picture of. Do you have anymore of these or know the part number so I can find it? I can't find any bottom mounts anywhere.
Thank you in advance for your time.
Vic
I am looking for the front bottom mount you show a picture of. Do you have anymore of these or know the part number so I can find it? I can't find any bottom mounts anywhere.
Thank you in advance for your time.
Vic
- 86humv
- G-Major General
- Posts: 2754
- Joined: Sat Aug 20, 2005 11:54 am
- Location: Texas
Re: Location of lower rifle mount on floor
pm sent
86 Hmmwv
Lots A parts
M101A2 trailer
M1102 trailer
Lots A parts
M101A2 trailer
M1102 trailer
Who is online
Users browsing this forum: No registered users and 23 guests