Anyone have a line on where I can obtain the weather stripping and fasteners that fasten to the underside of the hood where the hood meets the base of the window. I also need the stripping for around the outer edge of the fuel fill entrance area and the stripping/ring which screws to the base mount on the air entake tube on the passenger side of the hood goes throught the top of the hood area. Sorry I don't have the proper nomenclature this is my first HMMWV and I am just getting acquainted with it. Any help would be great.
Thanks,
Kurt
Looking for weather stripping and fasteners for M998
Moderator: Kurt Lesser
-
- G-Command Sergeant Major
- Posts: 220
- Joined: Thu May 04, 2006 8:08 pm
- Location: Wherever God puts me!
Looking for weather stripping and fasteners for M998
Kurt
1943 M3 Halftrack
1952 M37
1984 M998
M100
America is still the greatest country on earth...don't give up the fight!
San Diego, CA
1943 M3 Halftrack
1952 M37
1984 M998
M100
America is still the greatest country on earth...don't give up the fight!
San Diego, CA
-
- G-Lieutenant General
- Posts: 5181
- Joined: Mon Feb 06, 2006 3:19 pm
- Location: East Tennessee
- Contact:
-
- G-Lieutenant General
- Posts: 5181
- Joined: Mon Feb 06, 2006 3:19 pm
- Location: East Tennessee
- Contact:
ec12338904.....retainer.....7.43
ec12338907.....retainer.....8.21
ec12338902.....retainer.....13.40
12338912.....seal..........2.41
12338918.....seal..........4.29
12339399-3.....rivets (15 needed).....0.39 ea
What is the "fuel fill entrance area "?
If you mean where the bucket attaches to the fender (where you pour fuel in), nothing goes between the plastic and the metal.
6001764.....gasket, air intake housing.....3.47
This is round with 3 screw holes and 1 large hole for the air intake to fit in.
Depending on how small an order is, I may ask for a dollar or two to help with paypal fees.
The prices above are for new parts including delivery to the lower 48 states or Canada.
Jason
ec12338907.....retainer.....8.21
ec12338902.....retainer.....13.40
12338912.....seal..........2.41
12338918.....seal..........4.29
12339399-3.....rivets (15 needed).....0.39 ea
What is the "fuel fill entrance area "?
If you mean where the bucket attaches to the fender (where you pour fuel in), nothing goes between the plastic and the metal.
6001764.....gasket, air intake housing.....3.47
This is round with 3 screw holes and 1 large hole for the air intake to fit in.
Depending on how small an order is, I may ask for a dollar or two to help with paypal fees.
The prices above are for new parts including delivery to the lower 48 states or Canada.
Jason
Who is online
Users browsing this forum: No registered users and 59 guests