MB frame, combat wheels, etc - Maine
-
- G-Private
- Posts: 5
- Joined: Tue May 02, 2017 5:40 pm
- Location:
MB frame, combat wheels, etc - Maine
All parts for a Jeep Willys CJ2a, CJ3a, MB:
Honestly, I bought these to save them from going to the scrap yard. Not trying to make a mint off this. If you see something you can use, make me an offer. All parts located in Houlton, ME 04730
MB frame with springs and axles. SOLD
1 Complete set of Combat wheels SOLD
Set of 3 frame and body vin tags for a '46 CJ2a, no registration or title available- offers?
3x hoods, all stamped 'Willys'- $50 ea. 1 may be MB as it has offset holes for the wooden blocks. Can someone verify?
At least 2-3 full sets of rims- $100/set. Would like to keep sets together before selling singles. All are 16"
Grille, and headlights -$75
6v starter - $75
3x Borg-Warner t90 transmissions, require rebuild -$50 ea.
3x Spicer t18 transfer case, require rebuld- $50 ea.
3x L head motors in various conditions. Two have been sitting outside and will no doubt need rebuilds. One of these is still connected to trans and transfer case and turns free. Would like to keep it together and sell complete if possible. Offers?
The one good L head motor that has been stored indoors is said to have been rebuild before storage, turns free. $500
2x CJ2 frames, pretty rough. Offers?
Twin stick pto- SOLD
All parts are or best offer
Jeep Willy's CJ CJ2a CJ3a MB GPW Willys
Honestly, I bought these to save them from going to the scrap yard. Not trying to make a mint off this. If you see something you can use, make me an offer. All parts located in Houlton, ME 04730
MB frame with springs and axles. SOLD
1 Complete set of Combat wheels SOLD
Set of 3 frame and body vin tags for a '46 CJ2a, no registration or title available- offers?
3x hoods, all stamped 'Willys'- $50 ea. 1 may be MB as it has offset holes for the wooden blocks. Can someone verify?
At least 2-3 full sets of rims- $100/set. Would like to keep sets together before selling singles. All are 16"
Grille, and headlights -$75
6v starter - $75
3x Borg-Warner t90 transmissions, require rebuild -$50 ea.
3x Spicer t18 transfer case, require rebuld- $50 ea.
3x L head motors in various conditions. Two have been sitting outside and will no doubt need rebuilds. One of these is still connected to trans and transfer case and turns free. Would like to keep it together and sell complete if possible. Offers?
The one good L head motor that has been stored indoors is said to have been rebuild before storage, turns free. $500
2x CJ2 frames, pretty rough. Offers?
Twin stick pto- SOLD
All parts are or best offer
Jeep Willy's CJ CJ2a CJ3a MB GPW Willys
Last edited by jerkzack on Thu Jun 22, 2017 5:55 pm, edited 5 times in total.
-
- G-First Lieutenant
- Posts: 690
- Joined: Sun Mar 25, 2012 11:19 am
- Location: Lexington Park, MD (Southern MD)
Re: MB frame, combat wheels, etc - Maine
Are any of the motors from an MB with an MB serial #?
TJ Zackman
1945 Willys MB, 430923, 3/28/45
Scored 98.375% at 2019 MVPA Convention York, PA
1953 M38A1, 69248, 12/53, 20999713
MVPA# 37298
1945 Willys MB, 430923, 3/28/45
Scored 98.375% at 2019 MVPA Convention York, PA
1953 M38A1, 69248, 12/53, 20999713
MVPA# 37298
-
- G-Private
- Posts: 5
- Joined: Tue May 02, 2017 5:40 pm
- Location:
Re: MB frame, combat wheels, etc - Maine
I will have to check and get back to you, but I doubt it. Should the engine serial # start with an MB?Thunderbird712 wrote:Are any of the motors from an MB with an MB serial #?
-
- G-First Lieutenant
- Posts: 690
- Joined: Sun Mar 25, 2012 11:19 am
- Location: Lexington Park, MD (Southern MD)
Re: MB frame, combat wheels, etc - Maine
Yea the serial should be MB XXXXX. Thanks for looking.
TJ
TJ
TJ Zackman
1945 Willys MB, 430923, 3/28/45
Scored 98.375% at 2019 MVPA Convention York, PA
1953 M38A1, 69248, 12/53, 20999713
MVPA# 37298
1945 Willys MB, 430923, 3/28/45
Scored 98.375% at 2019 MVPA Convention York, PA
1953 M38A1, 69248, 12/53, 20999713
MVPA# 37298
-
- G-Staff Sergeant
- Posts: 66
- Joined: Fri Jul 29, 2016 11:37 am
- Location:
Re: MB frame, combat wheels, etc - Maine
can you please post pictures of front and rear differentials on the rusted frame.
thanks
thanks
-
- G-Sergeant Major
- Posts: 163
- Joined: Tue Aug 01, 2006 3:27 am
- Location: Germany
Re: MB frame, combat wheels, etc - Maine
PM sent
Ford GPW ; DoD Aug.30.1943 ; original data plates
frame #140334
frame #140334
-
- G-Private
- Posts: 5
- Joined: Tue May 02, 2017 5:40 pm
- Location:
Re: MB frame, combat wheels, etc - Maine
Frame is sold, sorry.rhinomil wrote:can you please post pictures of front and rear differentials on the rusted frame.
thanks
-
- G-Captain
- Posts: 757
- Joined: Mon Aug 06, 2007 1:18 pm
- Location: Northport, N.Y.
Re: MB frame, combat wheels, etc - Maine
I'd like the MB bent grill. Please let me know, OK? Thanks.
John
John
-
- G-Private
- Posts: 5
- Joined: Tue May 02, 2017 5:40 pm
- Location:
Re: MB frame, combat wheels, etc - Maine
PM'djkillelea wrote:I'd like the MB bent grill. Please let me know, OK? Thanks.
John
-
- G-Private
- Posts: 5
- Joined: Tue May 02, 2017 5:40 pm
- Location:
Re: MB frame, combat wheels, etc - Maine
No MB motors, all are CJ except for one truck motor.Thunderbird712 wrote:Are any of the motors from an MB with an MB serial #?
Back to the top!
Who is online
Users browsing this forum: No registered users and 48 guests