Are any of these oilers proper?
From left to right
Unnamed, Pittsburg Cem Mfg Co. (appears to be stamped), Eagle (raised), unnamed.
Close up of the Pittsburg
Eagle top
Sorry for all the dumb questions, but I'm really out of my knowledge base on older tools.
Oilers
- pjones
- G-Major General
- Posts: 2793
- Joined: Wed Jan 05, 2011 1:26 pm
- Location: East Tennessee
Re: Oilers
The only oiler that may be correct for the jeep or GMTK would be the oiler second from the left. What is the diameter of the base? Is it 4"?
Phil
Phil
pjones
'42 Ford GPW 7127
Need a MVMTS/GMTK?
Need a jeep toolkit?
'42 Ford GPW 7127
Need a MVMTS/GMTK?
Need a jeep toolkit?
-
- G-Sergeant
- Posts: 45
- Joined: Thu Feb 15, 2018 8:29 am
- Location:
Re: Oilers
It is 3 3/4 across the base
-
- G-Brigadier General
- Posts: 2215
- Joined: Tue Dec 23, 2003 11:06 am
- Location: Dallas, Tx
Re: Oilers
Close/but no cigar--needs to be 4"...Hold onto it as you may need the spout someday..Gem is a WW2 supplier...Look for Gem or, Eagle in that shape..
Last edited by lucas on Mon Feb 19, 2018 1:12 pm, edited 3 times in total.
45 MB 428129
3-15-45
20692926 (est.)
3-15-45
20692926 (est.)
-
- G-Sergeant
- Posts: 45
- Joined: Thu Feb 15, 2018 8:29 am
- Location:
Re: Oilers
Bummer, thanks
- d42jeep
- G-Brigadier General
- Posts: 2291
- Joined: Tue Feb 25, 2014 4:06 pm
- Location: Albany/Fallen Leaf Lake, CA
- Contact:
Re: Oilers
I picked up an unusual 3-1/2” oiler at the Tahoe flea on Sunday. Has anybody run across one of these before?
-Don
-Don
- Attachments
-
- Master Oiler
- 0B9E123E-402A-4E01-8075-2DFB157731F9.jpeg (140.11 KiB) Viewed 527 times
-
- D9A7431A-56E1-457F-A816-AEB5CE884441.jpeg (97.8 KiB) Viewed 527 times
-
- 1213A8B0-87CA-46D7-91A8-CCB6961624E5.jpeg (118.61 KiB) Viewed 527 times
Ford GPW 76344 DOD 11/42 Built in Richmond, CA
Who is online
Users browsing this forum: d42jeep and 64 guests