Hybrid GMTK/MVMTS For Sale

Manufacturers, configurations, Shovels, Axe, Wrenches, Oiler, F/E etc.
User avatar
d42jeep
G-Brigadier General
G-Brigadier General
Posts: 2290
Joined: Tue Feb 25, 2014 4:06 pm
Location: Albany/Fallen Leaf Lake, CA
Contact:

Hybrid GMTK/MVMTS For Sale

Post by d42jeep » Sun Dec 11, 2016 5:51 am

I have recently put together another almost complete hybrid GMTK and am offering it for sale. It comes in a unmarked McAleer box with the original patina. A complete Duro Chrome 7 ignition wrench set is included with a roll that's in very good condition. The few omissions offer the new owner the opportunity to personalize the set. Please check all of my RA PD style images along with the list of contents and feel free to PM with any questions you might have. I welcome any comments about this set. The price is $850.00 plus shipping. I believe if you calculate the cost per tool, this price is quite low. No international shipping. Now $650.00 plus shipping.
-Don

Partial Hybrid GMTK

41-B-292 Rolling Head Pry Bar - US QMC marked
41-B-1157 Hacksaw Blades - Unmarked
41-B-1840 Tool Box - E.J. McAleer Unmarked
38-B-3345 Sash Brush - Unmarked
41-C-1052 Cape Chisel – Unmarked
41-C-1124 3/4" Cold Chisel - Unmarked
41-C-1106 1/2" Cold Chisel - Unmarked
41-C-1104 3/8" Diamond Chisel -
41-D-1514 Brass Drift 1” x 7” - Unmarked
41-F-886 10" Smooth File - Simonds
41-F-950 6" Half Round Smooth File - Unmarked
41-F-1304 8" Round Bastard File - Nicholson
41-F-1553 8" Three Square Bastard File - Nicholson NOS
41-F-3390 Hacksaw Frame - Unmarked
41-F-3394 Hacksaw Frame - Forsberg
41-G-350 Spark Plug Gauge - Auto Lite SP-1272
41-G-355 Spark Plug Gauge - Kastar
41-G-400 Thickness Gauge - Starrett 172A
41-H-520 Ball Peen Hammer 4 oz. - Stanley Standard
41-H-523 Ball Peen Hammer 16 oz. - Billings
41-H-527 Ball Peen Hammer 32 oz. - Plumb
41-H-1116 File Handle 1-1/4" dia. - (2) Unmarked
41-H-1117 File Handle 1" dia. - (3) Unmarked
41-K-370 Electricians Knife - Utica wood scales
41-K-546 Putty Knife 1-1/4" - Unmarked
13-O-1530 Spring Bottom Oiler 4" dia. – Eagle
41-P-1650 Slip Joint Pliers 6" - Boker
41-P-1652 Slip Joint Pliers 8" - Cee Tee
41-P-1714 Diagonal Pliers 6" - Boker
41-P-1904 Long Nose Pliers 6" - Utica
41-P-1977 Flat Nose Pliers - Peck, Stow and Wilcox (Pexto)
41-P-1991 Long Nose Pliers – Side Cutting - Boker
41-P-2100 Water Pump Pliers – Utica 3 Diamond
41-P-3185 Center Punch 4-1/2" - Unmarked 4"
41-P-3640 Drive Pin Punch 1/8" - Millers Falls
41-P-3642 Drive Pin Punch 1/4" – Millers Falls
41-P-3606 Drive Pin Punch 1/4" – Unmarked
41-P-3608 Drive Pin Punch 3/8" – Unmarked
41-R-2990 Steel Rule 6" – Starrett 600
41-S-1063 Close Quarter Screwdriver - Unmarked
41-S-1076 Heavy Duty Screwdriver 6" Blade - Tobrin
41-S-1078 Heavy Duty Screwdriver 10" Blade –
41-S-1225 Electricians Screwdriver 2-1/2" Blade - Unmarked
41-S-1228 Electricians Screwdriver 5-1/2" Blade - Unmarked 5"
41-S-1385 Extra Heavy Duty Screwdriver 5" Blade - Unmarked Irwin
41-S-1400 Double Offset Screwdriver –
41-S-1638 Phillips Screwdriver #2 – Apex
41-S-1640 Phillips Screwdriver #3 – Stanley
41-S-2806 Tin Snips 7" – Boker
41-W-486 Adjustable Wrench 8" – Williams Superjustable
41-W-488 Adjustable Wrench 12" - Williams Superjustable
41-W-1660 Pipe Wrench 6" – Ridgid
41-W-1662 Pipe Wrench 10" - Ridgid
41-W-1663 Pipe Wrench 14" - Ridgid
41-W-2449 Hex Wrench 3/16" - Allen & 3/32” - Allen
41-W-2450 Hex Wrench 1/4" - Allen & 1/8” - Allen
41-W-2451 Hex Wrench 5/16" – Allen & 5/32” - Allen
41-W-2452 Hex Wrench 3/8" – Allen
41-W-620 Short DBE Wrench 3/8" x 7/16" – Vlchek WBC1214
41-W-662 Short DBE Wrench 1/2" x 9/16" - Bonney
41-W-625 Short DBE Wrench 5/8" x 3/4" – Barcalo Buffalo
41-W-603 Long DBE Wrench 11/16" x 3/4" - Barcalo Buffalo
41-W-605 Long DBE Wrench 13/16" x 7/8" - Williams Superrench Alloy NOS
41-W-608 Long DBE Wrench 15/16" x 1” – Vlchek
41-W-900 Ignition Wrench Set - Duro Chrome
41-W 1468-350 Wrench, Elec. 13/64” (15 ) x 15/64” (60 ) - Duro-Chrome E61
41-W 1468-355 Wrench, Elec. 15/64” (15 ) x 13/64” (60 ) - Duro-Chrome E62
41-W 1468-360 Wrench, Elec. 7/32” (15 ) x 1/4” (60 ) - Duro-Chrome E63
41-W 1468-365 Wrench, Elec. 1/4” (15 ) x 7/32” (60 ) - Duro-Chrome E64
41-W 1468-370 Wrench, Elec. 9/32” (15 ) x 5/16” (60 ) - Duro-Chrome E65
41-W 1468-375 Wrench, Elec. 5/16” (15 ) x 9/32” (60 ) - Duro-Chrome E66
41-W 1468-375 Wrench, Elec. 5/16” (15 ) x 9/32” (60 ) - Duro-Chrome E66
41-W 1468-380 Wrench, Elec. 11/32” (15 ) x 3/8” (60 ) - Duro-Chrome E67
41-R-2738-75 Roll, Electrical Wrench Set, Leatherette, 7 pockets - Duro Metal Products
41-W-991 DOE Wrench 3/8" x 7/16" - Williams 723
41-W-1003 DOE Wrench 1/2" x 9/32" - Duro Circle DC 1025
41-W-1005-5 DOE Wrench 9/16" x 11/16" - Duro Circle DC1027C
41-W-1008-10 DOE Wrench 5/8" x 25/32" - Barcalo 28S
41-W-1012-5 DOE Wrench 3/4" x 7/8" - Williams 731A
41-W-1021 DOE Wrench 15/16" x 1" – Williams Superrench 1033C Alloy
41-W-2615 Socket Set 1/4" Drive - Stevens Walden with Walden 3150 ¼” Drive ratchet
41-W-2970 Socket ¼” Drive 3/16” 6 point – Walden 3106
41-W-2971 Socket ¼” Drive 7/32” 6 point – Walden 3107
41-W-2972 Socket ¼” Drive 1/4” 6 point – Walden 3108
41-W-2972-100 Socket ¼” Drive 9/32” 6 point – Walden 3109
41-W-2972-120 Socket ¼” Drive 5/16” 6 point – Walden 3110
41-W-2972-140 Socket ¼” Drive 11/32” 6 point – Walden 3111
41-W-2976 Socket ¼” Drive 3/8” 12 point – Walden 3112
41-W-2977 Socket ¼” Drive 7/16” 6 point – Walden 3114
41-W-2972-600 Socket ¼” Drive 1/4” 8 point – Walden 3159
41-W-2972-620 Socket ¼” Drive 5/16” 8 point – Walden 3160
41-W-2972-640 Socket ¼” Drive 3/8” 8 point – Walden 3161
41-H-1509 Handle ¼” Drive Spinner Insulated – Walden 3118
41-H-1498-80 Flex Handle ¼” Drive 5” – Walden 3117
41-B-304 Extension ¼” Drive – Walden
41-H-1509-50 Sliding Tee Handle ¼” Drive – Walden 3116
41-B-1643 Box Hinged Cover ¼” Drive - Stevens Walden
41-W-3005 Socket 7/16" 1/2" Drive - D-I 1214
41-W-3007 Socket 1/2" 1/2" Drive - D-I 1216
41-W-3009 Socket 9/16" 1/2" Drive - D-I 1218
41-W-3011 Socket 19/32" 1/2" Drive - D-I 1219
41-W-3013 Socket 5/8" 1/2" Drive - D-I 1220
41-W-3015 Socket 11/16" 1/2" Drive - D-I 1222
41-W-3017 Socket 3/4" 1/2" Drive - D-I 1224
41-W-3019 Socket 25/32" 1/2" Drive - D-I 1225
41-W-3021 Socket 13/16" 1/2" Drive - D-I 1226
41-W-3023 Socket 7/8" 1/2" Drive - D-I 1228
41-W-3025 Socket 15/16" 1/2" Drive - D-I 1230
41-W-3027 Socket 1" 1/2" Drive - D-I 1232
41-W-3029 Socket 1-1/16" 1/2" Drive - Duro Chrome Vanadium 1234
41-W-3031 Socket 1-1/8" 1/2" Drive - Williams
41-B-155 Cross Bar 10" - Unmarked 8"
41-B-307 Extension 1/2" Drive 5" – Unmarked
41-B-309 Extension 1/2" Drive 10" – Chrome Vanadium 3211
41-B-645 Drag Link Bit Set - consisting of;
41-B-647 Drag Link Bit 47/64" - Walden
41-B-648 Drag Link Bit 15/16" - D-I Unmarked
41-B-649 Drag Link Bit 1-3/16" - New Britain NS93
41-H-1500 Flex Handle 1/2" Drive - Walden
41-H-1501 Offset Handle 1/2" Drive - Mossberg
41-H-1505 Ratchet 1/2" Drive - Indestro Unmarked 3202R with removable plug
41-H-1508 Speeder Handle 1/2" Drive - Duro Chrome 651D
41-J-380 Universal Joint 1/2" Drive - Unmarked Indestro 3217
Attachments
image.jpeg
RAPD picture 1
image.jpeg (212.88 KiB) Viewed 4606 times
image.jpeg
RAPD picture 2
image.jpeg (183.09 KiB) Viewed 4607 times
image.jpeg
RAPD picture 3
image.jpeg (165.27 KiB) Viewed 4607 times
image.jpeg
RAPD picture 4
image.jpeg (192.18 KiB) Viewed 4607 times
image.jpeg
Tools back in the box
image.jpeg (170.92 KiB) Viewed 4606 times
image.jpeg
Tools back in the box 2
image.jpeg (195.48 KiB) Viewed 4606 times
image.jpeg
Vlchek DBE, Cee Tee pliers and Plumb 2lb hammer added after RAPD photos
image.jpeg (148.92 KiB) Viewed 4606 times
image.jpeg
Williams 731A added after RAPD photos
image.jpeg (205.97 KiB) Viewed 4606 times
Last edited by d42jeep on Thu Dec 27, 2018 4:18 pm, edited 11 times in total.
Ford GPW 76344 DOD 11/42 Built in Richmond, CA


User avatar
d42jeep
G-Brigadier General
G-Brigadier General
Posts: 2290
Joined: Tue Feb 25, 2014 4:06 pm
Location: Albany/Fallen Leaf Lake, CA
Contact:

Re: Hybrid GMTK for sale

Post by d42jeep » Fri Feb 03, 2017 3:21 am

Apco Mossberg Ell handle added and price reduction
Attachments
IMG_2474.JPG
Mossberg Ell handle 41-H-1501
IMG_2474.JPG (61.25 KiB) Viewed 4469 times
IMG_2473.JPG
Mossberg Ell other side
IMG_2473.JPG (78.14 KiB) Viewed 4469 times
Ford GPW 76344 DOD 11/42 Built in Richmond, CA

User avatar
d42jeep
G-Brigadier General
G-Brigadier General
Posts: 2290
Joined: Tue Feb 25, 2014 4:06 pm
Location: Albany/Fallen Leaf Lake, CA
Contact:

Re: Hybrid GMTK/MVMTS for sale

Post by d42jeep » Wed Apr 19, 2017 4:44 pm

Rather than lower the price any further, I have gone about upgrading the set in an effort to have it go to members of this forum rather than offering it on the auction site. The set is now only missing three tools. All of the other previously missing tools have been added. The three stars indicate additions or upgrades. Still no international shipping. Still only $800.00 plus shipping. Please email or PM. Thanks for looking.
-Don

Hybrid GMTK

41-B-292 Rolling Head Pry Bar - US QMC marked
41-B-1157 Hacksaw Blades - Unmarked
41-B-1840 Tool Box - E.J. McAleer Unmarked
38-B-3345 Sash Brush - Unmarked
41-C-1052 Cape Chisel – Unmarked
41-C-1124 3/4" Cold Chisel - Unmarked***Mayhew
41-C-1106 1/2" Cold Chisel - Unmarked
41-C-1104 3/8" Diamond Chisel -
41-D-1514 Brass Drift 1” x 7” - Unmarked
41-F-862 10" Bastard File - ***Simonds
41-F-886 10" Smooth File - Simonds
41-F-950 6" Half Round Smooth File - Unmarked***Simonds
41-F-1304 8" Round Bastard File - Nicholson
41-F-1553 8" Three Square Bastard File - Nicholson NOS
41-F-3390 Hacksaw Frame - Unmarked
41-F-3394 Hacksaw Frame - Forsberg
41-G-350 Spark Plug Gauge - Auto Lite SP-1272
41-G-355 Spark Plug Gauge - Kastar
41-G-400 Thickness Gauge - Starrett 172A
41-H-520 Ball Peen Hammer 4 oz. - Stanley Standard***Stanley
41-H-523 Ball Peen Hammer 16 oz. - Billings***Plumb
41-H-527 Ball Peen Hammer 32 oz. - Plumb
41-H-1116 File Handle 1-1/4" dia. - (2) Unmarked
41-H-1117 File Handle 1" dia. - (3) Unmarked
41-K-370 Electricians Knife - Utica wood scales
41-K-546 Putty Knife 1-1/4" - Unmarked
13-O-1530 Spring Bottom Oiler 4" dia. – Eagle
41-P-1650 Slip Joint Pliers 6" - Boker***Cee Tee
41-P-1652 Slip Joint Pliers 8" - Cee Tee
41-P-1714 Diagonal Pliers 6" - Boker***Crescent 940-6 US marked
41-P-1904 Long Nose Pliers 6" - Utica***Kraeuter 1671-6
41-P-1977 Flat Nose Pliers -*** Peck, Stow and Wilcox
41-P-1991 Long Nose Pliers – Side Cutting - Boker***Kraeuter 1661-6
41-P-2100 Water Pump Pliers – Utica 3 Diamond
41-P-3185 Center Punch 4-1/2" - Unmarked 4"
41-P-3640 Drive Pin Punch 1/8" - Millers Falls
41-P-3642 Drive Pin Punch 1/4" – Millers Falls
41-P-3606 Drive Pin Punch 1/4" – ***Unmarked
41-P-3608 Drive Pin Punch 3/8" – Unmarked
41-R-2990 Steel Rule 6" – Starrett 600
41-S-1063 Close Quarter Screwdriver - Unmarked
41-S-1076 Heavy Duty Screwdriver 6" Blade - Tobrin
41-S-1078 Heavy Duty Screwdriver 10" Blade – ***Unmarked Irwin
41-S-1225 Electricians Screwdriver 2-1/2" Blade - Unmarked
41-S-1228 Electricians Screwdriver 5-1/2" Blade - Unmarked 5"
41-S-1385 Extra Heavy Duty Screwdriver 5" Blade - Unmarked Irwin
41-S-1400 Double Offset Screwdriver –
41-S-1638 Phillips Screwdriver #2 – Apex
41-S-1640 Phillips Screwdriver #3 – Bridgeport
41-S-2806 Tin Snips 7" – Boker***Wiss V13
41-W-486 Adjustable Wrench 8" – Williams Superjustable***Danielson Bet'rGrip 1942
41-W-488 Adjustable Wrench 12" - Williams Superjustable***Danielson Bet'rGrip 1944
41-W-1660 Pipe Wrench 6" – Ridgid
41-W-1662 Pipe Wrench 10" - Ridgid
41-W-1663 Pipe Wrench 14" - Ridgid
41-W-2449 Hex Wrench 3/16" - Allen & 3/32” - Allen
41-W-2450 Hex Wrench 1/4" - Allen & 1/8” - Allen
41-W-2451 Hex Wrench 5/16" – Allen & 5/32” - Allen
41-W-2452 Hex Wrench 3/8" – Allen
41-W-620 Short DBE Wrench 3/8" x 7/16" – Vlchek WBC1214
41-W-662 Short DBE Wrench 1/2" x 9/16" - Bonney
41-W-625 Short DBE Wrench 5/8" x 3/4" – Barcalo Buffalo
41-W-603 Long DBE Wrench 11/16" x 3/4" - ***Barcalo Buffalo
41-W-605 Long DBE Wrench 13/16" x 7/8" - Williams Superrench Alloy NOS
41-W-608 Long DBE Wrench 15/16" x 1” – Vlchek
41-W-900 Ignition Wrench Set - Duro Chrome
41-P-1820 Pliers, Ignition, Distributer, Slip Joint, 5” - *** Lectrolite
41-W 1468-350 Wrench, Elec. 13/64” (15 ) x 15/64” (60 ) - Duro-Chrome E61
41-W 1468-355 Wrench, Elec. 15/64” (15 ) x 13/64” (60 ) - Duro-Chrome E62
41-W 1468-360 Wrench, Elec. 7/32” (15 ) x 1/4” (60 ) - Duro-Chrome E63
41-W 1468-365 Wrench, Elec. 1/4” (15 ) x 7/32” (60 ) - Duro-Chrome E64
41-W 1468-370 Wrench, Elec. 9/32” (15 ) x 5/16” (60 ) - Duro-Chrome E65
41-W 1468-375 Wrench, Elec. 5/16” (15 ) x 9/32” (60 ) - Duro-Chrome E66
41-W 1468-375 Wrench, Elec. 5/16” (15 ) x 9/32” (60 ) - Duro-Chrome E66
41-W 1468-380 Wrench, Elec. 11/32” (15 ) x 3/8” (60 ) - Duro-Chrome E67
41-R-2738-75 Roll, Electrical Wrench Set, Leatherette, 7 pockets - Duro Metal Products
41-W-991 DOE Wrench 3/8" x 7/16" - Williams 723
41-W-1003 DOE Wrench 1/2" x 9/32" - Duro Circle DC 1025
41-W-1005-5 DOE Wrench 9/16" x 11/16" - Duro Circle DC 1027C
41-W-1008-10 DOE Wrench 5/8" x 25/32" - Barcalo 28S
41-W-1012-5 DOE Wrench 3/4" x 7/8" - Williams 731A***Duro Circle DC 1731A
41-W-1021 DOE Wrench 15/16" x 1" – Williams Superrench 1033C Alloy
41-W-2615 Socket Set 1/4" Drive - Stevens Walden with Walden 3150 ¼” Drive ratchet
41-W-2970 Socket ¼” Drive 3/16” 6 point – Walden 3106
41-W-2971 Socket ¼” Drive 7/32” 6 point – Walden 3107
41-W-2972 Socket ¼” Drive 1/4” 6 point – Walden 3108
41-W-2972-100 Socket ¼” Drive 9/32” 6 point – Walden 3109
41-W-2972-120 Socket ¼” Drive 5/16” 6 point – Walden 3110
41-W-2972-140 Socket ¼” Drive 11/32” 6 point – Walden 3111
41-W-2976 Socket ¼” Drive 3/8” 12 point – Walden 3112
41-W-2977 Socket ¼” Drive 7/16” 6 point – Walden 3114
41-W-2972-600 Socket ¼” Drive 1/4” 8 point – Walden 3159
41-W-2972-620 Socket ¼” Drive 5/16” 8 point – Walden 3160
41-W-2972-640 Socket ¼” Drive 3/8” 8 point – Walden 3161
41-H-1509 Handle ¼” Drive Spinner Insulated – Walden 3118
41-H-1498-80 Flex Handle ¼” Drive 5” – Walden 3117
41-B-304 Extension ¼” Drive – ***Walden 3115
41-H-1509-50 Sliding Tee Handle ¼” Drive – ***Walden 3116
41-B-1643 Box Hinged Cover ¼” Drive - Stevens Walden
41-W-3005 Socket 7/16" 1/2" Drive - D-I 1214
41-W-3007 Socket 1/2" 1/2" Drive - D-I 1216
41-W-3009 Socket 9/16" 1/2" Drive - D-I 1218
41-W-3011 Socket 19/32" 1/2" Drive - D-I 1219
41-W-3013 Socket 5/8" 1/2" Drive - D-I 1220
41-W-3015 Socket 11/16" 1/2" Drive - D-I 1222
41-W-3017 Socket 3/4" 1/2" Drive - D-I 1224
41-W-3019 Socket 25/32" 1/2" Drive - D-I 1225
41-W-3021 Socket 13/16" 1/2" Drive - D-I 1226
41-W-3023 Socket 7/8" 1/2" Drive - D-I 1228
41-W-3025 Socket 15/16" 1/2" Drive - D-I 1230
41-W-3027 Socket 1" 1/2" Drive - D-I 1232
41-W-3029 Socket 1-1/16" 1/2" Drive - *** Duro Chrome Vanadium 1234
41-W-3031 Socket 1-1/8" 1/2" Drive - Williams S-1236
41-B-155 Cross Bar 10" - *** Unmarked 8"
41-B-307 Extension 1/2" Drive 5" – Unmarked
41-B-309 Extension 1/2" Drive 10" – Duro Chrome Vanadium 3211
41-B-645 Drag Link Bit Set - consisting of;
41-B-647 Drag Link Bit 47/64" - Walden 1129
41-B-648 Drag Link Bit 15/16" - ***Duro unmarked 1305
41-B-649 Drag Link Bit 1-3/16" - NB ***Snap-on A15 (1945)
41-H-1500 Flex Handle 1/2" Drive - Walden
41-H-1502 Handle, Socket Wrench, Flexible Head, 18”, 1/2'” Drive - ***Williams FSN marked
41-H-1501 Offset Handle 1/2" Drive - Mossberg
41-H-1505 Ratchet 1/2" Drive - Indestro Unmarked 3202R with removable plug
41-H-1508 Speeder Handle 1/2" Drive - Duro Chrome 651D
41-J-380 Universal Joint 1/2" Drive - Unmarked Indestro 3217
Attachments
IMG_3705.JPG
Walden 1/4" drive set
IMG_3705.JPG (89.08 KiB) Viewed 4283 times
IMG_3706.JPG
1/2" drive tools
IMG_3706.JPG (185.57 KiB) Viewed 4283 times
IMG_3707.JPG
Items from the top tray
IMG_3707.JPG (130.03 KiB) Viewed 4283 times
IMG_3711.JPG
Toolbox refilled
IMG_3711.JPG (173.59 KiB) Viewed 4283 times
IMG_3709.JPG
Items from the lower level
IMG_3709.JPG (132.83 KiB) Viewed 4283 times
IMG_3710.JPG
Top tray and toolbox top
IMG_3710.JPG (185.37 KiB) Viewed 4283 times
IMG_3712.JPG
Pipe wrenches, large wrenches and speeder
IMG_3712.JPG (205.63 KiB) Viewed 4283 times
IMG_3713.JPG
Top tray back in the toolbox
IMG_3713.JPG (156.25 KiB) Viewed 4283 times
Last edited by d42jeep on Wed Feb 28, 2018 8:26 am, edited 2 times in total.
Ford GPW 76344 DOD 11/42 Built in Richmond, CA

User avatar
pjones
G-Major General
G-Major General
Posts: 2791
Joined: Wed Jan 05, 2011 1:26 pm
Location: East Tennessee

Re: Hybrid GMTK/MVMTS For Sale

Post by pjones » Thu Apr 20, 2017 4:59 pm

Don,
Looks like a well thought out set with features from several GMTK's. This ends up adding some bonus pieces and who wouldn't be excited about having extra tools? It still amazes me at how each of these sets have their own distinct personality even though we all choose from the same pool of tool brands. At this point we have seen a growing number of these and this one doesn't disappoint. These can be very time consuming to put together and cost can add up quickly. Sometimes its just nice to let someone who has spent a lot of time researching these put one together for you and save you the cost of buying incorrect tools or shipping form the auction house. This one has some really nice features such as the Walden set, DI socket set, Duro ignition wrench set, the dated JPD adj wrenches, a nice set of matching Rigid pipe wrenches, Apco Mossberg ell bar, BB DBE, a 4 oc Standard, and on and on! Its a great set Don. Good luck with the sale.

phil
pjones
'42 Ford GPW 7127
Need a MVMTS/GMTK?
Need a jeep toolkit?

User avatar
Wingnutt
G-Lieutenant General
G-Lieutenant General
Posts: 5029
Joined: Mon Oct 24, 2011 1:17 pm
Location:

Re: Hybrid GMTK/MVMTS For Sale

Post by Wingnutt » Fri Apr 21, 2017 7:39 am

Well said, Phil. I noticed that the strong Duro theme running through this kit (1/2-inch drive set, ignition set) continues into the DOE wrenches as well, with 3 of the 5 being Circle-DC. In fact, I pledge to send a matching Duro-Chrome Circle-DC 1723 - as well as a rolling head pry bar marked "C. Drew No. 75" - to the next prospective keeper of this kit for FREE, if he wants to upgrade for the cost of postage only! I'll just add that the correct gages are not easy to find either! In my experience it's the little things that bite in you in the butt when completing these kits.

Thanks to former long-time lurkers gpw_42 and Sunny there is a revitalized sense of interest in the GMTK again. While those guys seem to have scavenging in their blood, whether at flea markets or on fleaBay, not everyone does. This is a very nice kit for the One Fell Swooper!
TEMPORARY DUTY

User avatar
mudbox
G-Colonel
G-Colonel
Posts: 1526
Joined: Wed Oct 27, 2010 3:09 pm
Location:

Re: Hybrid GMTK/MVMTS For Sale

Post by mudbox » Sat Apr 22, 2017 6:32 am

Kind of surprised when I see someone able to let go of such a nice set. You're a better man than me! :lol:
If you're the type that thinks you will put together a set by yourself, from the flea market, I can tell you from experience that between the hours spend digging and the cost of fuel, the cost of this set is still a bargain.
If you're the type that thinks you'll put together a nice set from eBay auctions... :roll: ... then the cost is a REAL bargain!

I think this kit is great because there's only 3 pieces 'missing', which would allow the new owner the opportunity to spend minimal time and money to complete what is already a nice, complete kit. Also, there's a handful of unmarked pieces which are likely wartime, but this allows the new owner an opportunity to customize it over time with correct branded pieces if they desire.

Regardless, this kit would look great in the back of any MV. Would add a nice touch to an already finished MV, or is a nice compliment to anyone working on an MV. I find myself grabbing tools out of my GMTK to do all manner of things on my vehicles or for odd jobs around the house.

Perhaps you have a heavy wrecker and a Jeep, and one day, you want to pull the engine out! :lol: Well, if it was good enough for the G.I. in '44, it's plenty good enough for today!
(notice the GMTK on the bumper in the foreground...)
Image

Good luck with the sale, Don. I'll keep an eye out for an extra Diamond point chisel, Pry bar, and Double Offset driver.

-Jason

User avatar
d42jeep
G-Brigadier General
G-Brigadier General
Posts: 2290
Joined: Tue Feb 25, 2014 4:06 pm
Location: Albany/Fallen Leaf Lake, CA
Contact:

Re: Hybrid GMTK/MVMTS For Sale

Post by d42jeep » Fri Apr 28, 2017 4:13 am

Guys,
Thanks to all of you for your comments. I appreciate them! I found a Duro circle DC 2015A to replace the Williams and make the set a little more Duro-centric.
-Don
Attachments
IMG_3834.JPG
41-W-605 Long DBE Wrench 13/16" x 7/8" – Duro Chrome 2015A Circle DC
IMG_3834.JPG (32.71 KiB) Viewed 4099 times
Ford GPW 76344 DOD 11/42 Built in Richmond, CA

User avatar
d42jeep
G-Brigadier General
G-Brigadier General
Posts: 2290
Joined: Tue Feb 25, 2014 4:06 pm
Location: Albany/Fallen Leaf Lake, CA
Contact:

Re: Hybrid GMTK/MVMTS For Sale

Post by d42jeep » Fri May 05, 2017 6:52 am

A couple more recent upgrades and additions to the set.
-Don
Attachments
IMG_3993.JPG
Williams 41-H-1502 FSN marked 18" flex handle
IMG_3993.JPG (23.99 KiB) Viewed 4047 times
IMG_3992.JPG
Williams 18" flex handle FSN markings
IMG_3992.JPG (181.29 KiB) Viewed 4047 times
IMG_3900.JPG
Auto Lite gapper with lens
IMG_3900.JPG (80.78 KiB) Viewed 4047 times
Ford GPW 76344 DOD 11/42 Built in Richmond, CA

User avatar
d42jeep
G-Brigadier General
G-Brigadier General
Posts: 2290
Joined: Tue Feb 25, 2014 4:06 pm
Location: Albany/Fallen Leaf Lake, CA
Contact:

Re: Hybrid GMTK/MVMTS For Sale

Post by d42jeep » Wed Aug 16, 2017 1:50 am

Still available. Price reduced. Now $750.00 plus shipping to the US only.
-Don
Ford GPW 76344 DOD 11/42 Built in Richmond, CA

User avatar
d42jeep
G-Brigadier General
G-Brigadier General
Posts: 2290
Joined: Tue Feb 25, 2014 4:06 pm
Location: Albany/Fallen Leaf Lake, CA
Contact:

Re: Hybrid GMTK/MVMTS For Sale

Post by d42jeep » Sun Jan 28, 2018 11:27 pm

Still available. Price further reduced to $700.00 plus shipping to the US only.
-Don
Ford GPW 76344 DOD 11/42 Built in Richmond, CA

User avatar
d42jeep
G-Brigadier General
G-Brigadier General
Posts: 2290
Joined: Tue Feb 25, 2014 4:06 pm
Location: Albany/Fallen Leaf Lake, CA
Contact:

Re: Hybrid GMTK/MVMTS For Sale

Post by d42jeep » Wed Feb 28, 2018 8:32 am

I have added a recent upgrade to this toolset. I acquired a Quartermaster Corps marked 41-B-292 lady's foot pry bar. Still offered at $700.00 plus US shipping! NOW $650.00 plus US shipping.
-Don
Attachments
IMG_1490.JPG
QMC marking
IMG_1490.JPG (173.01 KiB) Viewed 3609 times
IMG_1514.JPG
US QMC marked 41-B-292
IMG_1514.JPG (77.9 KiB) Viewed 3609 times
Ford GPW 76344 DOD 11/42 Built in Richmond, CA

User avatar
d42jeep
G-Brigadier General
G-Brigadier General
Posts: 2290
Joined: Tue Feb 25, 2014 4:06 pm
Location: Albany/Fallen Leaf Lake, CA
Contact:

Re: Hybrid GMTK/MVMTS For Sale

Post by d42jeep » Thu Dec 27, 2018 4:24 pm

NOW $650.00 plus US shipping! I doubt that you will ever find a set of this quality at a price this low.
-Don
Ford GPW 76344 DOD 11/42 Built in Richmond, CA

mrbill
G-Second Lieutenant
G-Second Lieutenant
Posts: 573
Joined: Mon Jan 24, 2005 2:52 pm
Location: Pittsburgh, PA

Re: Hybrid GMTK/MVMTS For Sale

Post by mrbill » Thu Dec 27, 2018 5:30 pm

Somebody needs to pull the trigger on this. It's a great price and you won't find a nicer guy to buy it from!

Bill
1945 Ford GPW 268739 from the Dallas, TX plant.

sincitygpw
G-Command Sergeant Major
G-Command Sergeant Major
Posts: 236
Joined: Sat Feb 02, 2013 6:47 pm
Location: Las Vegas, NV

Re: Hybrid GMTK/MVMTS For Sale

Post by sincitygpw » Fri Dec 28, 2018 5:35 am

Hi All
Very Nice set, at a give away price !!! Someone will get a good deal 8)

Dave

lucas
G-Brigadier General
G-Brigadier General
Posts: 2215
Joined: Tue Dec 23, 2003 11:06 am
Location: Dallas, Tx

Re: Hybrid GMTK/MVMTS For Sale

Post by lucas » Fri Dec 28, 2018 7:19 am

AGREE---good price----and great for new member who wants to save big time $$$ and get a quality set of tools...It would take years, and a large bankroll, to accumulate these tools on the open market......
45 MB 428129
3-15-45
20692926 (est.)


Post Reply

Return to “G503 Tools & Equipment (Vehicle & Pioneer)”

Who is online

Users browsing this forum: No registered users and 43 guests