Another thing I have found is the quality of the pawls. 3 total.
Some repro pawls I have come across have rounded ends and the bump on top, in the center is not very pronounced.
More like a ripple than a bump.
The originals had square ends which made it harder for them to pop out.
I have reinstalled the old ones if they were in good shape instead of using the poor quality repro's.
transmission assembly part 1
-
- G-Lieutenant General
- Posts: 6907
- Joined: Sat Jan 12, 2008 5:25 am
- Location: Tipton,In.
Re: transmission assembly part 1
Mike Wolford
CJ-2A
VEP GPW
Comm./Inst. SEL
AOPA ( 50 yrs)
EAA ( 49 yrs)
4th Inf. Div. - 5th Inf. Div. - 2nd Armor Div. - CIB
CJ-2A
VEP GPW
Comm./Inst. SEL
AOPA ( 50 yrs)
EAA ( 49 yrs)
4th Inf. Div. - 5th Inf. Div. - 2nd Armor Div. - CIB
-
- Jeep Heaven
- Posts: 49841
- Joined: Sun Mar 02, 2008 12:37 pm
- Location: Proving Ground
Re: transmission assembly part 1
There has been a 15 year history of wrong synchronizer plates being wholesaled to dealers, most are too long and jam the blocking rings. Good quality blocking rings are also hard to find, Ron should have them. Best to find genuine Borg Warner parts, or W.O.F if possible. Do not cut the ends off the synchronizer springs.
2011 MVPA PIONEER AWARD - MVPA #1064
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
HONOR GRAD-WHEELED VEHICLE MECHANIC SCHOOL 1960 - US ARMY ORDNANCE SCHOOL(MACHINIST) ABERDEEN PG 1962 - O-1 BIRD DOG CREWCHIEF - 300,000+TROUBLE FREE M-38A1 MILES
LIFE MEMBER AM LEGION-40/8-DAV
7 MIL SPEC MAINTAINED MV'S
COL. BRUNO BROOKS (ARMY MOTORS) IS MY HERO
-
- G-Colonel
- Posts: 1817
- Joined: Fri Oct 02, 2009 10:59 am
- Location:
Re: transmission assembly part 1
I noticed the differences in the bumps as well.
Much junk parts around when it comes to gearboxes.
Always reuse original parts when possible.
I still have 1 rebuild WOF gearbox in the crate, these internals will probably end up in my GPA
Hi Ben, Why not cutting the ends ?
Looks like it works for Mike..
Please enlighten us...am aware you know what you are talking about.
Much junk parts around when it comes to gearboxes.
Always reuse original parts when possible.
I still have 1 rebuild WOF gearbox in the crate, these internals will probably end up in my GPA
Hi Ben, Why not cutting the ends ?
Looks like it works for Mike..
Please enlighten us...am aware you know what you are talking about.
-
- G-Lieutenant General
- Posts: 6907
- Joined: Sat Jan 12, 2008 5:25 am
- Location: Tipton,In.
Re: transmission assembly part 1
I am not cutting both ends off on the synchronizer springs Ben.
Only one end. Leave the other on.
It needs to be inserted into one of the synchronizer plates. ( Not pawl as I described it. Thanks for the correction.)
Only one end. Leave the other on.
It needs to be inserted into one of the synchronizer plates. ( Not pawl as I described it. Thanks for the correction.)
Mike Wolford
CJ-2A
VEP GPW
Comm./Inst. SEL
AOPA ( 50 yrs)
EAA ( 49 yrs)
4th Inf. Div. - 5th Inf. Div. - 2nd Armor Div. - CIB
CJ-2A
VEP GPW
Comm./Inst. SEL
AOPA ( 50 yrs)
EAA ( 49 yrs)
4th Inf. Div. - 5th Inf. Div. - 2nd Armor Div. - CIB
Who is online
Users browsing this forum: No registered users and 58 guests