Bolt identification help wanted
-
- G-Private
- Posts: 3
- Joined: Sat Jun 07, 2014 1:21 am
- Location:
Bolt identification help wanted
I am doing some work on my jeep and have a selection of bolts that have been used. Can anyone tell me what they are? Think some are modern, just curious, there are plenty of f script but even with my limited knowledge I worked that one out.
UK jeep enthusiast
GPW: 6067
GPW: 6067
-
- G-Lieutenant General
- Posts: 3598
- Joined: Fri Dec 13, 2002 2:54 pm
- Location: Sydney, Australia.
- Contact:
Re: Bolt identification help wanted
Hi mate,
I`m no expert but i`ll ad from what I`ve seen over the years. I dont profess to say what is right and wrong, but thought a starting answer was better than no answer at all.
I think you are in the UK and I`m on Australia, so there might be some substance in the possibilities of original/used.
#1. I have seen A40 bolts, but cant remember where on jeeps.
#2- similar to a GPW recessed head bolt, but not the same. Not seen these ones before.
#3- i`d go with modern, especially with the 3 ticks for a hardness marking.
#4- not seen before
#5- not seen before
#6- an EC bolt off a Willys MB or GMC truck (CCKW etc) or possibly a few other vehicles.
Cheers,
Ian.
I`m no expert but i`ll ad from what I`ve seen over the years. I dont profess to say what is right and wrong, but thought a starting answer was better than no answer at all.
I think you are in the UK and I`m on Australia, so there might be some substance in the possibilities of original/used.
#1. I have seen A40 bolts, but cant remember where on jeeps.
#2- similar to a GPW recessed head bolt, but not the same. Not seen these ones before.
#3- i`d go with modern, especially with the 3 ticks for a hardness marking.
#4- not seen before
#5- not seen before
#6- an EC bolt off a Willys MB or GMC truck (CCKW etc) or possibly a few other vehicles.
Cheers,
Ian.
Australian Jeep Investigator
MB: 131175
GPW: 11730.
GPW: 225290.
Aust trailer: GMH 3- #211
http://www.vintageengines.net
MB: 131175
GPW: 11730.
GPW: 225290.
Aust trailer: GMH 3- #211
http://www.vintageengines.net
- Michael O.
- G-Lieutenant General
- Posts: 6131
- Joined: Wed Feb 26, 2003 12:29 am
- Location: The Great State of Nebraska
Re: Bolt identification help wanted
+1 on Ian's comments.
FYI...I'd be happy to take the EC bolt off your hands if you don't want it.
FYI...I'd be happy to take the EC bolt off your hands if you don't want it.
Michael O’Connell
Too many jeeps…and a Dodge.
MVPA 13861
Too many jeeps…and a Dodge.
MVPA 13861