G503.com Message Forums

by **newtothis** » Sun Mar 18, 2012 6:12 am

this photo should show the name JIGGS above rear wheel arch [on both sides],just readable.

by **newtothis** » Sun Mar 18, 2012 6:42 am

not so good photo of the shortened early type dipstick[i think?]

by **newtothis** » Sun Mar 18, 2012 6:55 am

another try at the photo size.

by **newtothis** » Sun Mar 18, 2012 7:42 am

water pump pulley,markings on spindle.

by **newtothis** » Sun Mar 18, 2012 7:50 am

water pump pulley,marked on centre spindle.

by **newtothis** » Sun Mar 18, 2012 7:57 am

photo of machine/assembly date at bottom rear corner of block.

by **newtothis** » Sun Mar 18, 2012 8:01 am

sorry about the photo sizes,still playing with photos to get the right size so you dont have to reduce the image to see the full picture.

by **sjalbert** » Sun Mar 18, 2012 8:04 am

I wish that I could get that good a photo of the machining date on my block

by **newtothis** » Sun Mar 18, 2012 8:07 am

f-script on the gear box support member.

by **newtothis** » Sun Mar 18, 2012 8:10 am

hi,took a super macro setting on the camera,and much will power plus 550 watts of light :oops:

by **newtothis** » Sun Mar 18, 2012 8:11 am

sjalbert wrote:I wish that I could get that good a photo of the machining date on my block

did you get the info i pm you ?

by **newtothis** » Sun Mar 18, 2012 8:17 am

water pump fitted to the motor at the time of purchase.

by **newtothis** » Sun Mar 18, 2012 8:24 am

crank fitted to the mb motor.

by **newtothis** » Sun Mar 18, 2012 8:36 am

crankshaft nut/handstarter,some grey paint visable,a bit chewed though.

by **newtothis** » Sun Mar 18, 2012 8:39 am

picture should show sc on fan blade.

date on bottom of mb block?