Cleaning Out Jerry cans
-
- G-Private
- Posts: 4
- Joined: Mon Apr 17, 2017 7:07 pm
- Location:
Cleaning Out Jerry cans
Hi guys..this is my first post so be gentle with me
I have just purchased a couple of used cans that I want to put onto an ex- military landrover1 that I am restoring...
I don't want to use the cans that are just for looks...
What is the best way to clean out the cans to get rid of any leftover fuel or fumes?
I have just purchased a couple of used cans that I want to put onto an ex- military landrover1 that I am restoring...
I don't want to use the cans that are just for looks...
What is the best way to clean out the cans to get rid of any leftover fuel or fumes?
-
- G-Private
- Posts: 4
- Joined: Mon Apr 17, 2017 7:07 pm
- Location:
Re: Cleaning Out Jerry cans
33views and no suggestions....I must be on the wrong site..goodbye
- mudbox
- G-Colonel
- Posts: 1526
- Joined: Wed Oct 27, 2010 3:09 pm
- Location:
Re: Cleaning Out Jerry cans
Ouch. The J-Can forum isn't the most viewed on the site. And, this question has been asked a number of times. So, the search function should get you there.Landrover1 wrote:33views and no suggestions....I must be on the wrong site..goodbye
However, some have used Molasses, electrolysis, gravel inside then strap it to a tire and watch it go round and round, I would think that something like C.L.R. would work too...
Good luck
-Jason
-
- G-Private
- Posts: 4
- Joined: Mon Apr 17, 2017 7:07 pm
- Location:
Re: Cleaning Out Jerry cans
Jasonmudbox wrote:Ouch. The J-Can forum isn't the most viewed on the site. And, this question has been asked a number of times. So, the search function should get you there.Landrover1 wrote:33views and no suggestions....I must be on the wrong site..goodbye
However, some have used Molasses, electrolysis, gravel inside then strap it to a tire and watch it go round and round, I would think that something like C.L.R. would work too...
Good luck
-Jason
Thank you for taking the time to post..I did not realise that there was a search button.
- David
- G-Colonel
- Posts: 1968
- Joined: Tue Dec 17, 2002 5:43 am
- Location: The Netherlands
Re: Cleaning Out Jerry cans
If it's just leftover fuel, a few rinses with water will do. After let dry well with the cap open.
Or you want to clean rust?
Or you want to clean rust?
- hell-fire
- G-Major General
- Posts: 3443
- Joined: Tue Oct 02, 2007 4:06 am
- Location:
Re: Cleaning Out Jerry cans
False teeth cleaner is good to try especially on Water cans.
John
Australia
Member VMVC #192
1942 Willys MB-BRT 135673 D.O.D. 4-16-42 Now 97% finished
Australia
Member VMVC #192
1942 Willys MB-BRT 135673 D.O.D. 4-16-42 Now 97% finished
-
- G-Private
- Posts: 4
- Joined: Mon Apr 17, 2017 7:07 pm
- Location:
Re: Cleaning Out Jerry cans
DavidDavid wrote:If it's just leftover fuel, a few rinses with water will do. After let dry well with the cap open.
Or you want to clean rust?
I just want to get any leftover fule/ fumes out so I can mount the can on the back of a Landrover for aesthetic reasons
- David
- G-Colonel
- Posts: 1968
- Joined: Tue Dec 17, 2002 5:43 am
- Location: The Netherlands
Re: Cleaning Out Jerry cans
The fumes won't hurt anything. It probably indicates the can isn't leaking and can be used.
But a good rinse with some water and soap will wash most smell out I think. Just make sure the can is completely dried out before you close it again.
But a good rinse with some water and soap will wash most smell out I think. Just make sure the can is completely dried out before you close it again.
-
- G-First Sergeant
- Posts: 129
- Joined: Tue Mar 14, 2017 4:19 pm
- Location:
Re: Cleaning Out Jerry cans
Actually normal water and soap won't do much......fuel and water don't mix. You need something that absorbs or breaks down fuel. You can Google "fuel tank repair" to see how many folks make tanks safe to weld on (all traces of fuel and fumes must be gone......or BOOOM!) I use Purple Power full strength, then dilute, then water rinse, hot air dry....and then a rust inhibitor of your choice. Just make sure it's really dry or the rust inhibitor will trap the remaining moisture and rust will form in the seams. Simple Green would probably work as well, but I haven't personally tried it.
regards,
bob
regards,
bob
- philbrinson
- Sergeant Major of the Gee
- Posts: 355
- Joined: Wed Oct 22, 2008 7:02 pm
- Location: Southeast GA
Re: Cleaning Out Jerry cans
POR-15 makes a metal cleaner for cleaning fuel tanks prior to resealing. It is very similar to Simple Green, but slightly stronger. Might be what you are looking for. I've used both for cleaning tanks and the POR-15 gave better results when I sealed the tank.
Phil
Phil
1937 Quartermaster Cart
1941 WC12 1941 WC21
1941 MB 1942 GPW
1942 G506 1942 Ben Hur
1943 M3A1 1943 Clark CA-1
1943 USMC Handcart
1944 Ben Hur 1944 Converto
1952 M100
1941 WC12 1941 WC21
1941 MB 1942 GPW
1942 G506 1942 Ben Hur
1943 M3A1 1943 Clark CA-1
1943 USMC Handcart
1944 Ben Hur 1944 Converto
1952 M100
Who is online
Users browsing this forum: No registered users and 37 guests