BC 659 power connector
-
- Sergeant Major of the Gee
- Posts: 382
- Joined: Sun Feb 01, 2009 9:15 am
- Location: England
BC 659 power connector
Hi all has a member the part number ,The power plug connector on the power pack as it plugs in to the radio cable , the power to radio, short link, feed in to radio from power pack end 8 pins female thank you colin
-
- G-First Lieutenant
- Posts: 637
- Joined: Fri May 23, 2008 12:04 pm
- Location: FRANCE - TOUL
Re: BC 659 power connector
Hello.
PM sent.
g504
PM sent.
g504
- wa5cab
- CWO4 (Ordnance) USNR
- Posts: 2064
- Joined: Sun Dec 29, 2002 11:22 am
- Location: USA/TX/Houston
- Contact:
Re: BC 659 power connector
The Signal Corps Stock Number for the pigtail cable with connector and special backshell is 1F50G1-2. The connector itself is AN 3106-20-14-7P. Which is a special with an unusual backshell. The generic connector (post war number) is MS 3106A-20-7P.
There are that I know of three types or styles of backshell/strain relief. I have never come across the exact nomenclature for the backshells. But the most common is a female to male threaded reducer that takes the AN 3057-6 cable clamp. I have a number of those. Another type has the same female threads to screw onto the -20 shell size connectors and at the other end has a rubber grommet. I forget the details of the third type right now. The cable is 8-conductor I think with # 18 AWG insulated wires. I can confirm that if necessary.
There are that I know of three types or styles of backshell/strain relief. I have never come across the exact nomenclature for the backshells. But the most common is a female to male threaded reducer that takes the AN 3057-6 cable clamp. I have a number of those. Another type has the same female threads to screw onto the -20 shell size connectors and at the other end has a rubber grommet. I forget the details of the third type right now. The cable is 8-conductor I think with # 18 AWG insulated wires. I can confirm that if necessary.
Gunner
USN Retired
MVPA 9480
USN Retired
MVPA 9480
- wa5cab
- CWO4 (Ordnance) USNR
- Posts: 2064
- Joined: Sun Dec 29, 2002 11:22 am
- Location: USA/TX/Houston
- Contact:
Re: BC 659 power connector
CORRECTION: The numbers that I gave below are for the pigtail and connector on the radio. The cable on the three vibrator power supplies (but not used on the CS-79 or CS-79-N or PE-120-B) is 3E4300-1. The connector with special backshell is 3101-20-14-7S. The basic connector is MS 3101A-20-7S. I have several of these with the special reducing backshell and AN 3057-6 cable clamp.
Gunner
USN Retired
MVPA 9480
USN Retired
MVPA 9480
Who is online
Users browsing this forum: No registered users and 54 guests