FS GRILL FOR BC1306
-
- G-Command Sergeant Major
- Posts: 202
- Joined: Fri Aug 25, 2006 3:03 am
- Location: THESSALONIKI MAKEDONIA
- GreyWulf
- Sergeant Major of the Gee
- Posts: 418
- Joined: Tue Nov 04, 2008 5:02 pm
- Location: Tennessee
Re: FS GRILL FOR BC1306
I am interested. PM sent.
1942 Slat Grill #111246
1943 GPW #135942
1943 PE-49F
1943 PE-75J
1943 PE-75K
1944 PE-75U
1943 PE-77D (x2)
1943 PE-77E
1944 PE-95G
SCR-177B, SCR-188A, SCR-274N, SCR-284A, SCR-300B,
SCR-506, SCR-508/528, SCR-509/510, SCR-593, TRC-2,
1946 GRC-9, BC-312/314/342/344s, BC-348R/P/Q,
BC-611C/D, BC-728, telephones and other comm gear
1943 GPW #135942
1943 PE-49F
1943 PE-75J
1943 PE-75K
1944 PE-75U
1943 PE-77D (x2)
1943 PE-77E
1944 PE-95G
SCR-177B, SCR-188A, SCR-274N, SCR-284A, SCR-300B,
SCR-506, SCR-508/528, SCR-509/510, SCR-593, TRC-2,
1946 GRC-9, BC-312/314/342/344s, BC-348R/P/Q,
BC-611C/D, BC-728, telephones and other comm gear
-
- G-Command Sergeant Major
- Posts: 202
- Joined: Fri Aug 25, 2006 3:03 am
- Location: THESSALONIKI MAKEDONIA
Re: FS GRILL FOR BC1306
Ok.
there is available four(4) socket of the radio and one set of used Grill
there is available four(4) socket of the radio and one set of used Grill
-
- G-Staff Sergeant
- Posts: 63
- Joined: Sun Jun 18, 2006 5:58 pm
- Location: Shoreline, WA
Re: FS GRILL FOR BC1306
PM sent. If greywolf doesn't take the grill, I'm interested.
-Phil
-Phil
1942 MB S/N 193532, Hood #20245660S, Body # 95018
1945 Converto Airborne Dump Trailer #0878180
RL-35 Handcart
1945 Converto Airborne Dump Trailer #0878180
RL-35 Handcart
-
- G-Command Sergeant Major
- Posts: 202
- Joined: Fri Aug 25, 2006 3:03 am
- Location: THESSALONIKI MAKEDONIA
Re: FS GRILL FOR BC1306
The Grill are sold and there is only two socket available.
-
- G-Lieutenant General
- Posts: 3505
- Joined: Sat Aug 16, 2003 7:55 pm
- Location: Texas
Re: FS GRILL FOR BC1306
What is shipping cost to USA for the power input socket?
-
- G-Command Sergeant Major
- Posts: 202
- Joined: Fri Aug 25, 2006 3:03 am
- Location: THESSALONIKI MAKEDONIA
Re: FS GRILL FOR BC1306
The shipping cost for the socket is 4.4 usd
If you want tracking, shipping is plus 2.9 USD.
If you want tracking, shipping is plus 2.9 USD.
-
- G-Lieutenant General
- Posts: 3505
- Joined: Sat Aug 16, 2003 7:55 pm
- Location: Texas
Re: FS GRILL FOR BC1306
I will take one of the connectors.PM sent
-
- G-Command Sergeant Major
- Posts: 202
- Joined: Fri Aug 25, 2006 3:03 am
- Location: THESSALONIKI MAKEDONIA
Re: FS GRILL FOR BC1306
OK Please send me your address at PM
Only one socket left.
Only one socket left.
-
- G-Lieutenant General
- Posts: 3505
- Joined: Sat Aug 16, 2003 7:55 pm
- Location: Texas
Re: FS GRILL FOR BC1306
WHY DID YOU SEND ME AN AIRCRAFT CONNECTOR NOT THE BC1306 CONNECTOR.Are you some kind of crooked scammer?
-
- G-Command Sergeant Major
- Posts: 202
- Joined: Fri Aug 25, 2006 3:03 am
- Location: THESSALONIKI MAKEDONIA
Re: FS GRILL FOR BC1306
In no case was something deliberately ... Please send me the photo of the wrong socket.
I sent you a personal message...please take a look.
thank you.
I sent you a personal message...please take a look.
thank you.
-
- G-Lieutenant General
- Posts: 3505
- Joined: Sat Aug 16, 2003 7:55 pm
- Location: Texas
Re: FS GRILL FOR BC1306
This will not even fit the CD 1086 and.The part number for the BC 1306 connector is 2Z5598-12.This part number is 2Z8741
-
- G-Command Sergeant Major
- Posts: 202
- Joined: Fri Aug 25, 2006 3:03 am
- Location: THESSALONIKI MAKEDONIA
Re: FS GRILL FOR BC1306
Dear Radtech and Grey, take a look at your PM .
Thank you.
Thank you.
- wa5cab
- CWO4 (Ordnance) USNR
- Posts: 2064
- Joined: Sun Dec 29, 2002 11:22 am
- Location: USA/TX/Houston
- Contact:
Re: FS GRILL FOR BC1306
Dallas,
I'll take it. Fits the PL-61. Used on BC-191, BD-77. BC-375 & PE-73. Also BC-229/429.
If you need the one that the PL-279 fits, I think I have two or three junker transmitters.
STELIOS,
You aren't the first one to make this type of mistake. The connectors on the BC-1306 and RT-77/GRC-9 have 9 electrical contacts. The one that you sent has 8 contacts plus in the TDC position has a mechanical guide pin instead of a 9th banana pin. You can't plug a PL-279 into it because the guide pin is too large in diameter. Also, the ones on the BC-1306 and RT-77 are threaded. The ones that you had are the push-button locking type mostly used in aircraft except for the BC-191 which is also a vehicular set.
Robert D.
I'll take it. Fits the PL-61. Used on BC-191, BD-77. BC-375 & PE-73. Also BC-229/429.
If you need the one that the PL-279 fits, I think I have two or three junker transmitters.
STELIOS,
You aren't the first one to make this type of mistake. The connectors on the BC-1306 and RT-77/GRC-9 have 9 electrical contacts. The one that you sent has 8 contacts plus in the TDC position has a mechanical guide pin instead of a 9th banana pin. You can't plug a PL-279 into it because the guide pin is too large in diameter. Also, the ones on the BC-1306 and RT-77 are threaded. The ones that you had are the push-button locking type mostly used in aircraft except for the BC-191 which is also a vehicular set.
Robert D.
Gunner
USN Retired
MVPA 9480
USN Retired
MVPA 9480
-
- G-Lieutenant General
- Posts: 3505
- Joined: Sat Aug 16, 2003 7:55 pm
- Location: Texas
Re: FS GRILL FOR BC1306
Sounds good Robert if you can use it.I will call you.
Who is online
Users browsing this forum: No registered users and 55 guests