What is the correct m151A1 base prc77
- Duke113P
- G-Colonel
- Posts: 1504
- Joined: Sat Dec 14, 2002 2:14 am
- Location: OK
What is the correct m151A1 base prc77
What is the correct m151A1 antenna vase and bracket for prc-77 vehicle mounted unit? Does it use the same antenna base as the RT-524?
"Snakes... why did it have to be snakes?..."
- Kurt Lesser
- G-Lieutenant General
- Posts: 3779
- Joined: Sun May 16, 2004 3:08 pm
- Location: San Jose, Ca
- Contact:
Re: What is the correct m151A1 base prc77
3. Mounting tray for each radio
MT-1029/VRC for the transceiver and MT-1898/VRC for the Aux Receiver.
4. Sponson Plate
Reinforces fender to take the weight of the radio SC-DL-48676 for the MT-1029 mount
SC-DL-48682 for the MT-1898 mount
5. Antenna
either AS-1729/VRC or AT-912/VRC for the Tranceivers and AB-15/GR or AB-558/GR for the Aux Receiver. The AS-1729/VRC Antenna consists of the MX-6707 base, AS-1730 lower whip section and the AT-1095 Upper whip section, a tip ball, and tiedown. It mounts on the 3 piece corner antenna mount (sugar scoop).
The AT-912/VRC antenna was an early version with a large rectangular matching unit. It consisted of MX-2799 matching unit, AS-719 Antenna Base, AT-1096 Lower whip section, AT-1095 upper whip section, Tip Ball, and Tiedown.
The AB-15/GR Antenna consisted of a AB-15 base (2 piece ball insulator), MS-116A, MS-117A, and MS-118A whip sections, UG-273 cable adapter, SC-DL-48528 side mount bracket, and SC-C-446109 brush guard. the AB-558/GR was for mounting on the sugar scoop bracket like the as-1729, and used the same whip sections as the AB-15.
The PRC-77 itself mounts into the AM-2060 (OA-3633) amplifier power supply and that mounts into the MT-1029 radio base.
Kurt
KG6KMJ
MT-1029/VRC for the transceiver and MT-1898/VRC for the Aux Receiver.
4. Sponson Plate
Reinforces fender to take the weight of the radio SC-DL-48676 for the MT-1029 mount
SC-DL-48682 for the MT-1898 mount
5. Antenna
either AS-1729/VRC or AT-912/VRC for the Tranceivers and AB-15/GR or AB-558/GR for the Aux Receiver. The AS-1729/VRC Antenna consists of the MX-6707 base, AS-1730 lower whip section and the AT-1095 Upper whip section, a tip ball, and tiedown. It mounts on the 3 piece corner antenna mount (sugar scoop).
The AT-912/VRC antenna was an early version with a large rectangular matching unit. It consisted of MX-2799 matching unit, AS-719 Antenna Base, AT-1096 Lower whip section, AT-1095 upper whip section, Tip Ball, and Tiedown.
The AB-15/GR Antenna consisted of a AB-15 base (2 piece ball insulator), MS-116A, MS-117A, and MS-118A whip sections, UG-273 cable adapter, SC-DL-48528 side mount bracket, and SC-C-446109 brush guard. the AB-558/GR was for mounting on the sugar scoop bracket like the as-1729, and used the same whip sections as the AB-15.
The PRC-77 itself mounts into the AM-2060 (OA-3633) amplifier power supply and that mounts into the MT-1029 radio base.
Kurt
KG6KMJ
Kurt Lesser
US Navy, 1969-1975
M996A1 Ambulance w/M101A3 Trailer
M274A2 Mule
M151A1 Mutt w/M416B1 Trailer
M890 Crew cab
US Navy, 1969-1975
M996A1 Ambulance w/M101A3 Trailer
M274A2 Mule
M151A1 Mutt w/M416B1 Trailer
M890 Crew cab
-
- G-Lieutenant General
- Posts: 3506
- Joined: Sat Aug 16, 2003 7:55 pm
- Location: Texas
Re: What is the correct m151A1 base prc77
Same as the RT 524.
Who is online
Users browsing this forum: No registered users and 36 guests