Punched out some primers on 37mm Brass Cases. These primers were M23A1 and M23A2 type. The type I had brought online where M28B2 type. As instructed I bought some 1/2 CPVC to make flash tubes. But the CPVC(for hot and cold) inside diameter is too small for the M23 type primer. 1/2 PVC(for cold only) is too big and the only thing I found that might work are the grey PVC nipples but even those were loose. I will use the Steel flash tubes on the M28B2 type primer but I will have to cut them down to maybe 3 or 4 inches because they a about 10 inches long now. Please advise if you have any experience with what works. See pic. Thanks. Buck
- primers small.jpg (139.92 KiB) Viewed 716 times
