Anyone have a picture and measurements of the tool used to remove the insert of the breech block on the pack 75mm, M5 3 inch.....?
Thanks in advance!
75mm, 3 inch, 105mm Breech block tool?
- Zwoodman
- G-Sergeant Major
- Posts: 198
- Joined: Sat Jul 17, 2010 2:54 pm
- Location: Lawton, OK
75mm, 3 inch, 105mm Breech block tool?
Zane Mohler
41 Dodge WC4 8670369 DoD 5 - 16 - 41
43 Rock Island Arsenal M3A4 Handcart 7390
43 John Wood M3A4 Handcart 17374
43 John Wood M3A4 Handcart 21424
44 John Wood M3A4 Handcart 29324
44 M53 Airborne Scooter 35289
44 Willys MB 350841 DoD 7 -12 - 44
44 Willy's MB-T 58396 DoD 1 - - 44
41 Dodge WC4 8670369 DoD 5 - 16 - 41
43 Rock Island Arsenal M3A4 Handcart 7390
43 John Wood M3A4 Handcart 17374
43 John Wood M3A4 Handcart 21424
44 John Wood M3A4 Handcart 29324
44 M53 Airborne Scooter 35289
44 Willys MB 350841 DoD 7 -12 - 44
44 Willy's MB-T 58396 DoD 1 - - 44
- Packhow75
- Sergeant Major of the Gee
- Posts: 418
- Joined: Fri Jul 06, 2007 2:51 am
- Location: UK
Re: 75mm, 3 inch, 105mm Breech block tool?
Assuming you are talking about the piece the firing pin sticks through... which if so, I think I've only ever removed the firing lock, then inserted a large flat bladed screw driver to unscrew this part... never used a special tool.
Tim
Tim
Ford GPW, 10cwt Trailer, 75mm Pack Howitzer, M3A1 White Scout Car, M4A4 Sherman VC - s/n 4873
Who is online
Users browsing this forum: No registered users and 44 guests