K-38 Tool List

Quarter-ton trailer series, Wanted, USED PARTS FOR SALE NO EBAY or COMMERCIAL SALES., and Knowledge Base
Locked
User avatar
tractor12
banned
Posts: 2097
Joined: Tue Oct 17, 2006 3:01 pm
Location: Atascadero CA
Contact:

K-38 Tool List

Post by tractor12 » Wed Nov 03, 2010 10:27 pm

There are 2 lists that contain different items. Here is list 1 of the 2 I hope to have the second some time next week.
TOOL VERSION 1 K-38 Trailer

Net wt. 98 pounds each, packed 123 pounds; cu ft., 5;spec. 318.
DL SET TE-56 (6R38056.1): Cable Splicers'; for cable construction and maintenance. Used with but does not include Trailer K-38.

Comprises:

1 AMPLIFIER (2C398), consists of 1 Amplifier, WE Co. #107A, 1 Cord, WE Co. W2BJ, equipped with Tool, WE Co. #513A, and Plug, WE Co. #47 and 1 Cord, WE Co. R2CF, equipped with 1 Receiver, WE Co. #108A, complete with 3 Vacuum Tubes, WE Co. type 32, or equal.

1 BAG (BQ2103), tool, Salisbury, nonmetallic, #30, Graybar, or equal.

6 BANDAGE TL-97 (6N9597).

3 BANDAGE (6N634-149), rubber, 4 inches by 14 feet, 33040, Amer E Co., or equal.

4 BATTERY BA-27 (3A27).

8 BEESWAX COMPOUND IC-2 (6N702).

12 BLADE (6Q8010-32), hacksaw, flexible, 32 teeth per inch, 10 inch, for hand frame.

12 BLADE (6Q8110-24), hacksaw, flexible, 24 teeth per inch, 10 inch, for hand frame.

50 BOARD (6Q10051) test, linen, splicers',numbered 51 to 99 and 1 to 51 (AT&T Co. spec. 6623).

50 BOARD (6Q10068) test, linen, splicers',numbered 1 to 68 (AT&T Co. spec. 6255).

1 BOOK (6D7100), specification, cable splicing, #4860 with supplements A,B, and C, ATT&T Co., or equal, with Binder #106, or equal.

1 CABLE DRESSER TL-90 (6Q15290).

1 CAN (6Z1716), safety, red, 3-gallon, 3/8-inch flexible spout #252, Protectoseal #247, or equal.

1 CAN ( ) , safety, green, 5-gallon #2067, Amer. E Co., or equal.

1 CLEANER (6Q27052), file, #2.

6 CLOTH (6N1620), cable wrapping, cotton, waterproof, approximately 24 by 18 inches.

6 CLOTH MC-74 (6N1574).

6 CLOTH MC-76 (6N1576).

2 CLOTH (6N1637), wiping, for upright joint, 1 3/4-inch center opening by 11-inch O.D., Williams, or equal.

2 CLOTH (6N1638), wiping, for upright joint, 3 3/4-inch center opening by 14-inch O.D., Williams, or equal.

10 DESICCANT (6G250), 1/2-pint, W. A. Hammond, or equal, AT&T Co. spec. AT-6882.

1 DIE (6Q31004), marking. steel figures, 1/4-inch set.

1 DIPPER ( ), paraffin, black pressed steel, 4 13/16-inch diameter at top, 3 1/4 inches deep, 1 3/4-pint capacity, mild steel hooked handle riveted on, AT&T Co. spec. 6679.

1 DRIFT PIN TL-81 (6Q31981).

1 DRIFT PIN TL-99 (6Q31999).

1 DRILL SET( ), Di-Forge, "Diamond," with type C holder Graybar, or equal.

1 FILE (6Q38030-8), flat 8-inch, bastard, Nicholson, or equal.

1 FILE (6Q38120-6), half-round, 6-inch, bastard, Nicholson, or equal.

10 FORM (6Q40004), soldering, for bonding ribbon, 7/8-inch, WE Co. or equal, AT&T Co. spec. 6531.

1 FRAME (6Q41000), hacksaw, adjustable, 8- to 12-inch

2 FUNNEL (6Z4027-8), metal, small, 1/2-pint

1 FURNACE ( ), plumbers', equipped with two 9 1/4-inch plumbers shield #3277, Clayton & Lambert #24A, or equal, 1 in use, 1 in spare.

1 HAMMER TL-39 (6Q49139).

1 HAMMER (6Q49600), double-faced, short neck, 2 1/4-pound, 15-inch over-all length, Vaughn & Bushnell, Graybar #13, or equal.

1 HAMMER ( ), riveting, cast steel, 18-ounce, Stanley-Atha #235, or equal, spec. 17-37.

3 HANDLE ( ), file, Millers Falls #448, or equal.

1 HANDLINE (6Z5045), aerial, 60 feet of 1/2-inch rope with ring spliced in one end, ring and open hook in other end, sheave block having shell integral with a hook, AT&T Co.spec 6859.

1 HANDSET ( ), telephone, lineman's, C.B. #1025, with cord and test clips, Kellogg, or equal.

1 HANDSET (4B1158), lineman's, with #4 dial and switch and equipped with W2BT cords and JP clips, WE Co. #1011BW. or equal.

2 HOOK (6Q52961), pot, 5/16-inch steel, 10 3/8-inch over-all, WE Co., or equal, AT&T Co. spec 6689.

2 HOOK ( ), shave, oval, 5-inch over-all, Wilcox & Crittenden #519 with sheath, or equal.

1 INSULATING COMPOUND IC-1 (6N3001).

1 KETTLE (6Q58013), compound, double-jacketed, 5-quart, Wall Mfg. Supply Co., or equal.

2 KNIFE TL-29 (6Q60229).

2 KNIFE 96Q600003), chipping, 3-inch blade with sheath, WE Co. #531388, or equal.

1 LADLE (6Q62531), pouring, 3 1/2-inch, 3/8-pint, Automatic Elec. "Unique" S-5712.

1 LADLE (6Q62530), melting, wrought-iron handle, double-lip, 3-inch.

10 MARLINE RP-2 (6Z6981).

1 MEGGER (3F3230), O-100-megohm, 500-volt, "Supper-Meg," James G. Biddle Co. #679, or equal.

1 MIRROR ( ), cable splicers', steel, chromium-plated case, WE Co., or equal.

1 pint OIL (6G1389), splicing, cold stripping, WE Co., or equal.

1 PAN (6R2321), drip, approximately 21 by 18 by 4 inches, smooth, polished, blued steel.

8 pounds PARAFIN WAX IC-4 (6N4004).

1 can PASTE (6N4102), soldering, 2-ounce.

3 rolls PASTER MC-73-A (6N4273A).

2 PICK (6R3002), test, complete with cord and test clip, AT&T Co. spec 6491.

1 PLIERS TL-103 (6R4603)

1 PLIERS TL-126 (6R4626)

2 POINT (6N4600), test, cable splicers', with cord and test clip, AT&T Co. spec. 6191

1 POT (6R6360), paint, nonspillable, Salisburry, or equal.

1 POT (6R6300), paraffin melting, 10-inch I.D. by 7 1/2 inches deep, capacity 9 quarts, with clamp-on lid, AT&T Co. spec. 6627.

1 POT (6R6304), paraffin melting, 12-inch I.D. by 9 inches deep, capacity 18 quarts, with clamp-on lid, AT&T Co. spec. 6627.

1 POT (6R6350C), plumbers' melting, 6 3/4 inch diameter.

1 PUNCH (6R7508), center, 1/2-inch.

1 PUNCH (6N4402), sleeve, 5/32-inch, Bell System standard, WE Co.,or equal.

1 PUNCH (6N4403), sleeve, 1/4-inch, Bell System standard, WE Co., or equal.

1 RASP(6R8210-12), half0round, 12-inch, bastard, less handle, Nicholson, or equal.

50 feet RIBBON (6N4903), bonding, copper, 3/8 inch wide, #16 B&S. Auto E Co., or equal.

2 RULE (6R9606), 6-foot, boxwood, "Zig-Zag," rivet-joint, Stanley #806, or equal.

1 SAW (6R11214), plumbers', similar to Disston #6, excep; 14-inch.

1 SCISSORS (6R13514), 6-inch.

1 SCREWDRIVER (6R15420), 3-inch, 1/4-inch tip, wood handle, 7 3/4-inch over-all.

1 SCREWDRIVER TL-21 (6R15310).

1 SCREWDRIVER TL-44 (6R16510).

1 SCREWDRIVER TL-106 (6R16810).

1 SCREWDRIVER SET TL-128 (6R19100).

6 boxes SLEEVE FT-97 (6N6010), 400 per box.

3 boxes SLEEVE FT-98 (6N6016), 300 per box.

1 SNIP (6R24011), tinners',Compton #10, or equal.

5 pounds SOLDER M-30 (6N7530),

1 spool SOLDER M-31 (6N7531).

5 pounds SOLDER M-33 (6N7533).

1 pound SOLDER (6N7600), wire, half and half, #10.

1 SOLDERING IRON TL-117 (6R24617).

1 SOLDERING IRON (6R24524H), size 3, 1 1/2-pound, with handle.

1 SOLDERING IRON (6R24540H), size 5, 2 1/2-pound, with handle.

1 SOLDERING IRON (6R24564H), size 8, 4-pound, with handle.

3 sticks STEARINE COMPOUND IC-3 (6N8003).

5 STRIP ( ), leather, 1/8 by 2 by 24 inches; for insulated joints.

1 TAPE (6R36025), 100-foot, measuring, steel, Lufkin Rival #246, or equal.

3 TAPE (6N8595), rubber, 2-inches wide, 30-foot roll.

2 TAPE TL-83 (6N8583).

2 TAPE TL-94 (6N8594).

1 TAPE TL-109 (6N8609).

2 rolls TAPE (6N8832-36), friction 2 inches wide, 1 1/2-pound roll.

1 TARPAULIN (6Z7510-3), 10-ounce, canvas, olive-drab duck, 12 by 16 feet.

6 TEST SET (3F4025), with cord and test clips, Kellogg Switchboard and Supply Co. #1025, or equal.

1 TEST SET (3F4004-1), splicers', portable, WE Co. #43A, or equal.

1 TEST SET (3F4004), splicers', portable, WE Co. #62A, or equal.

1 TEST SET (3F4004-3), splicers', portable, WE Co. #20C, or equal.

1 THERMOMETER (6Z8642), solder and paraffin, W.C. Dillion & Co. "Temperometer."

1 TOOL (6R41016B), screw driver and socket wrench, WE Co. #216-B, or equal.

1 TOOL (6R41701), wire braid stripper, Diamond, or equal.

1 TORCH (6R42100-32A), blow, gasoline, 1-quart, Clayton & Lambert Co. #32A, or equal.

1 WEDGE (6Z9430), lead cable, for Y joints, WE Co. #1, or equal.

1 WINDSHIELD (6Q43167/1), for #50 Dreadnaught Big Brute Splicers, formerly 6Q43617/1

200 feet WIRE W-72 (1A72).

200 feet WIRE W-101 (1B101).

1 WRENCH TL-111 (6R 55006)
WC12 Wc 27 2 K38s Mz2 ambulance jeep 2 M3a4s M1a1 Chemical Mortar cart T4e1 usmc cart convertible


Steve Webb
G-General
G-General
Posts: 16666
Joined: Fri Jan 17, 2003 3:40 pm
Location: Fort Myers, Florida

Re: K-38 Tool List

Post by Steve Webb » Thu Nov 04, 2010 3:19 pm

Great info, that would make a great adventure for someone to collect and stock one.
Stand for the Flag, Kneel for the Cross Psalm 55; 9-11

User avatar
tractor12
banned
Posts: 2097
Joined: Tue Oct 17, 2006 3:01 pm
Location: Atascadero CA
Contact:

Re: K-38 Tool List

Post by tractor12 » Thu Nov 04, 2010 5:17 pm

There is a few of us doing just that. I have 2 K-38s and trying to do one of each kit. I forgot to say send your thanks to Robin Bartel he was the one with the original manual and let me copy it all for you guys
WC12 Wc 27 2 K38s Mz2 ambulance jeep 2 M3a4s M1a1 Chemical Mortar cart T4e1 usmc cart convertible

rgus
G-Brigadier General
G-Brigadier General
Posts: 2031
Joined: Sun Dec 21, 2003 7:50 am
Location: East Central Indiana

Re: K-38 Tool List

Post by rgus » Thu Nov 24, 2011 3:57 am

I just bought a K-38 trailer that is complete, less the tools of course. I would like to keep an eye out for the components just to see how much of it I could locate. Is there another resource that has illustrations of the tools so you would know if you saw any of them for sale? Any information on where to look for these tools? I did not see the type of lantern and windshield listed. What was the lantern?
Anyone have any extra items they would sell?
43 M3A1 256117, 42 CCKW 129,XXX, 43 GPW 146954, 43 WC54 81635383, 43 WC54 81665843, 45 WC52 818682 "MO', 43 WC63 82009972 "BIG MO", 44 GTBA NAVY CARGO 218299, 43 PE95, 44 Checker K52 Trailer,42 MBT 375, 44 Coverto Trailer 886475

User avatar
Gordon_M
G-Colonel
G-Colonel
Posts: 1840
Joined: Thu Feb 26, 2004 9:32 am
Location: central and north east Scotland, depending on the day

Re: K-38 Tool List

Post by Gordon_M » Thu Nov 24, 2011 8:57 am

If you do a search for cable splicer trailer you should throw up some images - i know there is a good image or two of Jaap's spare furnace shield, and furnace.

I made my lantern guard, and the lantern itself it a Dietz Little Wizard No 1 - I think. I bought an NOS US Army surplus one from E-Bay last year some time and it fitted straight in.
Gordon

1941 Highway Trailer K-38
1944 Iron Fireman T-36 Snow Tractor
1986 Nolan Road/Rail trailer

User avatar
tractor12
banned
Posts: 2097
Joined: Tue Oct 17, 2006 3:01 pm
Location: Atascadero CA
Contact:

Re: K-38 Tool List

Post by tractor12 » Thu Nov 24, 2011 9:51 am

RGUS your in the same boat as all of us I know Robin, Gordon, and I are all trying to get every tool for ours.
WC12 Wc 27 2 K38s Mz2 ambulance jeep 2 M3a4s M1a1 Chemical Mortar cart T4e1 usmc cart convertible

User avatar
tractor12
banned
Posts: 2097
Joined: Tue Oct 17, 2006 3:01 pm
Location: Atascadero CA
Contact:

Re: K-38 Tool List

Post by tractor12 » Thu Jan 24, 2013 7:11 pm

TOOL VERSION 2 K-38 Trailer

DL SET TE-56-A (6R38056A): Cable Splicers'; for cable construction and maintenance. Used with but does not include Trailer K-38.

Comprises:

1 AMPLIFIER (2C398), consists of 1 Amplifier, WE Co. #107A, 1 Cord, WE Co. W2BJ, equipped with Tool, WE Co. #513A, and Plug, WE Co. #47 and 1 Cord, WE Co. R2CF, equipped with 1 Receiver, WE Co. #108A, complete with 3 Vacuum Tubes, WE Co. type 32, or equal.

25 ANCHOR (6Z284-4), hammer, drive 1/4- by 1-inch, Diamond, or equal.

25 ANCHOR (6Z284-6), hammer, drive 1/4- by 1 1/2-inch, Diamond, or equal.

6 rolls BANDAGE TL-97 (6N9597).

3 rolls BANDAGE (6N634-14), rubber, 4 inches by 14 feet, #3040, Amer E Co., or equal.

6 BATTERY BA-2 (3A2); formerly 3A6571.

4 BATTERY BA-23 (3A23); 4 used in Test Set 1020-C.

6 BATTERY BA-27 (3A27); formerly 3A6570.

8 BATTERY BA-27 (3A27); 2 used in FLASHLIGHT TL-122-A, 6 spare.

1 BELT LC-23-B (6Q4523B-40) or LC-23-A (6Q4523A-40), 40 inch length, lineman's size 22.

12 BLADE (6Q8010-32), hacksaw, flexible, 32 teeth per inch, 10 inch, for hand frame.

12 BLADE (6Q8110-24), hacksaw, flexible, 24 teeth per inch, 10 inch, for hand frame.

4 BOARD (6Q10001-51), fiber test, 52-hole, 1-51, Auto E. Co. #210, Kellogg #810, or equal.

4 BOARD (6Q10002-101), fiber test, 52-hole, 52-101, Auto E. Co. #811, Kellogg #811, or equal.

2 BOARD (6Q10003-202), fiber test, 52-hole, 102-152, Auto E. Co. #812, Kellogg #812, or equal.

2 BOARD (6Q10003-253), fiber test, 52-hole, 152-202, Auto E. Co. #813, Kellogg #813, or equal.

2 BOARD (6Q10004-203), fiber test, 52-hole, 203-253, Auto E. Co. #814, Kellogg #814, or equal.

2 BOARD (6Q10051), fiber test, 52-hole, 253-303, Auto E. Co. #815, Kellogg #815, or equal.

50 BOARD (6Q10051) test, linen, splicers',numbered 51 to 99 and 1 to 51 (AT&T Co. spec. 6623).

50 BOARD (6Q10068) test, linen, splicers',numbered 1 to 68 (AT&T Co. spec. 6255).

1 BOOK (6D7100), specification, cable splicing, #4860 with supplements A,B, and C, ATT&T Co., or equal, with Binder #106, or equal.

6 BOOK (6D7101), specification, AT&T Co. with six Binder #106, or equal

1 CAN (6Z1716), safety, red, 3-gallon, 3/8-inch flexible spout #252, Protectoseal #247, or equal.

12 CLAMP (5B3508), bonding ribbon, rolled zinc, 1/2-inch wide, 5/16-inch holes, WE Co. #510982, or equal.

1 CLEANER (6Q27052), file, Nicholson #2, or equal.

1 pair CLIMBERS LC-5 (6Q28205).

12 CLIP ( ), transfer, AT&T Co. spec. 6869, or equal.

6 CLOTH (6N1621), cable wrapping, cotton, waterproof, approximately 25 by 40 inches, Auto E Co. #546, or equal.

6 CLOTH MC-74 (6N1574).

6 CLOTH MC-76 (6N1576).

2 CLOTH (6N1637), wiping, for upright joint, 1 3/4-inch center opening by 11-inch O.D., Williams, or equal.

2 CLOTH (6N1638), wiping, for upright joint, 3 3/4-inch center opening by 14-inch O.D., Williams, or equal.

1 COIL (3C395), exploring, WE Co. #75-A or equal; for use with WE Co. #108 amplifier.

6 CORD (3EW2AK), test with clips, WE Co. #W2AK, or equal.

10 cans DESICCANT (6G250-1), 1/2-pint, W. A. Hammond Drierite Co., or equal.

1 set DIES (6Q31004), marking, steel figures, 1/4-inch set.

1 set DIES (6Q31104), marking, steel figures, 1/4-inch set

1 DIPPER ( 6Q31716), paraffin, black pressed steel, 4 13/16-inch diameter at top, 3 1/4 inches deep, 1 3/4-pint capacity, mild steel hooked handle riveted on.

1 DRESSER 96Q31966), cable-wood, WE Co. dwg. 466-13, or equal.

1 DRIFT PIN TL-81 (6Q31981).

1 DRIFT PIN TL-98 (6Q31998).

1 DRIFT PIN TL-99 (6Q31999).

1 DRILL (6Q35311), 4-point, 1/4 inch, 8 inches long, "Diamond N," or equal.

1 DRILL (6Q35310), 4-point, 3/8 inch, 8 inches long, "Diamond N," or equal.

1 DRILL (6Q35312), 4-point, 1/2 inch, 8 inches long, "Diamond N," or equal.

1 DRILL (6Q35313), 4-point, 3/4 inch, 8 inches long, "Diamond N," or equal.

1 DRILL SET( 6Q35309 ), Di-Forge, "Diamond," with type C holder, Graybar, or equal.

1 FILE (6Q38027), combination, splicers', WE Co. spec. type H, or equal.

1 FILE (6Q38030-8), flat, 8-inch, bastard.

1 FILE (6Q38120-6), half-round, 6-inch, bastard.

1 FLASHLIGHT TL-122-A (6Z4002A.1).

1 FORM (6Q40003), bonding tool, aluminum, aerial, Slindelar Bonding Tool Co., or equal.

10 FORM (6Q40004), soldering, for bonding ribbon, 7/8-inch, WE Co. or equal, AT&T Co. spec. 6531.

1 FRAME (6Q41000), hacksaw, adjustable, 8- to 12-inch.

2 FUNNEL (6Z4021-8), seamless, small, 1/2-pint, Masback #1062N, or equal.

1 FURNACE (6Q43167 ), with both gasoline and kerosene orifices, wrench, cleaning needle, and 7 5/8-inch by 5 1/2-inch hood, Wall Mfg. Supply Co. #50 Dreadnaught big Brute Splicers', or equal.

1 HAMMER TL-39 (6Q49139).

1 HAMMER (6Q49600), lineman's, double-faced, 2 1/4-pound, Bell System Pattern, Vaughan & Bushnell, Graybar #13.

1 HAMMER ( 6Q50018 ), riveting, 18-ounce.

3 HANDLE ( 6Q51131-5), file, Millers Falls #448, or equal.

3 HANDLE ( 6Q51185-5.1), soldering iron, spec. NN-H-106.

1 HANDLINE (6Z5045), aerial, 60 feet of 1/2-inch rope with ring spliced in one end, ring and open hook in other end, sheave block having shell integral with a hook, AT&T Co. spec 6859.

1 HANDSET ( 4B1158), lineman's with #4 dial and switch; equipped with W2BT cords and JP clips, WE Co. #1011BW, or equal.

1 HOOK (6253100), manhole cover, Cope Inc. type "A," or equal.

2 HOOK (6Q52961), pot, 5/16-inch steel, 10 3/8-inch over-all, WE Co., or equal.

2 HOOK (6Q53519), shave, oval, 5 3/4 inches over-all, with sheath, Pexto, Bell Systems Pattern, or equal.

10 pounds INSULATING COMPOUND IC-5 (6N3005).

1 KETTLE (6Q58013), compound, double-jacketed, 5-quart, Wall Mfg. Supply Co., or equal.

1 KIT (6Z6600), first-aid, 5 by 4 by 3 inches, Johnson & Johnson Co., or equal.

2 KNIFE TL-29 (6Q60229).

2 KNIFE ( ), chipping, 3-inch blade with sheath, WE Co. #531388, or equal.

1 LADLE (6Q62531), pouring, 3 1/2-inch, 3/8-pint, Auto E Co. #S-5712.

1 LADLE (6Q62530), melting, wrought-iron handle, double-lip, 3-inch.

10 pounds MARLINE RP-2 (6Z6981).

1 MEGGER (3F3230), "Supper-Meg," O-100-megohm, 500-volt, James G. Biddle #619, or equal.

1 MIRROR (6N3100), cable splicers', steel, chromium-plated case, WE Co., or equal.

5 pounds OAKUM (6Z7250), plumbers', 7-strand, 1 3/4-inch diameter, untarred, Manning, Mazwell, & Moore, or equal.

1 can OIL (6G1385), neat's-foot, 1-pint.

1 can Oil (6G1389), splicing, cold stripping, in pint can, WE Co., or equal.

1 can PAINT (6G1409), asphalt, 1-pint.

1 PAN (6R2321), drip, approximately 21 by 18 by 4 inches, smooth, polished, blued steel, All-Steel Equip. Co., or equal.

8 pounds PARAFIN WAX IC-4 (6N4004).

1 can PASTE (6N4102), soldering, 2-ounce.

3 rolls PASTER MC-73-A (6N4273A).

2 PICK (6R3002), test, complete with cord and test clip.

1 PLIERS TL-103 (6R4603)

1 PLIERS TL-107 (6R4607)

1 PLIERS TL-126 (6R4626)

2 POINT (6N4600), test, cable splicers', with cord and test clips.

1 POT (6R6360), paint, P.B., nonspillable, Salisburry, or equal.

1 POT (6R6300.1), paraffin melting, 10-inch I.D. by 7 1/2 inches deep, with clamp-on lid, capacity 9 quarts.

1 POT (6R6350D), plumbers' melting, 6 inch.

1 PUNCH (6R7508), center, 1/2-inch.

1 PUNCH (6N4402), sleeve, 5/32-inch, Bell System standard, WE Co.,or equal.

1 PUNCH (6N4403), sleeve, 1/4-inch, Bell System standard, WE Co., or equal.

50 feet RIBBON (6N4903), bonding, copper, 3/8 inch wide, #16 B&S. Auto E Co., or equal.

2 RULE (6R9606), 6-foot, boxwood, "Zig-Zag," rivet-joint, Stanley #806, or equal.

1 SAW (6R10314), cable, 14-inch, E.C. Atkins324, or equal.

2 SCISSORS (6R38005/1), 5-inch, electricians', Wiss #175E, or equal.

24 SCREW (5B10004-2.5), lag, steel, galvanized, 1/4- by 2 1/2-inch.

48 SCREW (6L9110-8), wood, round head, steel, galvanized, 1-inch, #10.

48 SCREW (5B14010-20), wood, round head, steel, galvanized, 2 1/2-inch, #10.

1SCREWDRIVER TL-21 (6R15310).

1 SCREWDRIVER TL-44 (6R16510).

1 SCREWDRIVER TL-106 (6R16810).

1 SCREWDRIVER SET TL-128 (6R19100).

1 SHOVEL (6R22010), manhole, Bell System Pattern #70, WE Co., or equal.

2 boxes SLEEVE FT-96 (6N6008), 700 per box.

6 boxes SLEEVE FT-97 (6N6010), 400 per box.

2 boxes SLEEVE FT-98 (6N6016), 300 per box.

1 roll SLEEVING FT-90 (6N6890), Auto E Co. #2, or equal.

1 SNIP (6R24011), tinners',Compton #10, or equal.

5 pounds SOLDER M-30 (6N7530),

1 spool SOLDER M-31 (6N7531).

5 pounds SOLDER M-33 (6N7533).

50 pounds SOLDER (6N7605), arsenic content, in pigs, Belmont S&R Works, Inc., or equal.

9 pounds SOLDER (6N7606), stearine core, Bell System, WE Co., or equal.

1 pound SOLDER (6N7600), wire, half and half, #10.

1 SOLDERING IRON (6R24524-1), size 3.

1 SOLDERING IRON (6R24540), size 5.

1 SOLDERING IRON (6R24564), size 8.

1 SOLDERING IRON TL-117 (6R24617).

6 sticks STEARINE COMPOUND IC-3 (6N8003).

5 STRIP (6R32605), leather, 1/8- by 2- by 24 inch strap leather; for insulated joints.

10 SUPPORT (6R32800), aerial cable, 22-inch, #3, national %3, or equal.

10 SUPPORT (6R32801), aerial cable, 22-inch, #5, WE Co., or equal.

12 TAGS (4z7293), cable, round, Bell System, WE Co., or equal.

12 TAGS (4Z7294), cable, octagonal, Bell System, WE Co., or equal.

12 TAGS (4Z7295), terminal, Bell System, WE Co., or equal.

2 TAPE TL-83 (6N8583).

2 TAPE TL-192 (6N8592).

1 TAPE TL-109 (6N8609).

2 rolls TAPE (6N8832-36), friction 2 inches wide, 1 1/2-pound roll.

3 rolls TAPE (6N8835), lead serving, national Lead Co., or equal.

1 roll TAPE (6R36046), measuring, linen, 5/8 inch wide, 100 feet long, Lufkin Rival #406, K and E 7495T; formerly 8A3730-4.

3 rolls TAPE (6N8595), rubber, 2-inches wide, 30-foot roll.

6 rolls TAPE 96N8932), scotch, electrical, tan, 1/2 inch by 36 yards, Bell System, WE Co., or equal; formerly 8A3730-4.

1 TEST SET I-51 (3F4051), splicers', portable, WE Co. #1020-C, or equal.

1 TEST SET (3F4051C), splicers', portable, WE Co. model 76A.

2 TEST SET (3F4004), splicers', portable, WE Co. #62A, or equal.

1 THERMOMETER (6Z8642), solder and paraffin, W.C. Dillion & Co. "Temperometer," or equal.

1 TIP (6R24617/1); for SOLDERING IRON TL-117; spare.

1 TOOL (6R41016B), screwdriver and socket wrench, WE Co. #216-B, or equal.

1 TOOL (6R41701), wire braid stripper, Diamond, or equal.

1 TORCH (6R42100-79A), blow, gasoline, 1-quart capacity, Bernz #79A Dreadnaught Heavy Duty, or equal.

1 TROUGH (6Z8719), paraffin, 14- by 28-inch, brass grommet in each corner, AT&T Co. Standard spec. 6361, or equal.

6 TUBE VT-44 (2T44); for WE Co. amplifier #108A; 3 in use, 3 spare.

2 TUBE (2V1A7GT), RCA 31A7GT; for WE Co. 76-A test set; 1 in use, 1 spare.

2 TUBE (2V3Q5GT/G), RCA 3Q5GT/G; for WE Co. 76-A test set; 1 in use, 1 spare.

1 VISE (6R47016), 2 1/2-inch jaw, swivel base, stationary jaw, Stanley #710, or equal.

12 WEDGE (6Z9430), lead cable, for Y joints, WE Co. #1, or equal

1 WINDSHIELD (6Q43167/1), for #50 Dreadnaught Big Brute Splicer, or equal.

200 feet WIRE W-72 (1A72).

100 feet WIRE (1A890), lead lashing, tinned bronze case.

1 pound WIRE (1A812.6), tie, copper, 0.080, 17 inches long, Bell System, WE Co., or equal.

1 WRENCH (6R57415), socket, linemans', Chance #154, or equal.

1 WRENCH TL-111 (6R 55006)
WC12 Wc 27 2 K38s Mz2 ambulance jeep 2 M3a4s M1a1 Chemical Mortar cart T4e1 usmc cart convertible


Locked

Return to “Trailers 1/4 ton”

Who is online

Users browsing this forum: No registered users and 48 guests