M 151 A frame assemblies

1959 - 1978, M151, M151A1, M151A2 jeeps, NO EBAY or COMMERCIAL SALES.
Post Reply
Stanley Steamer
G-Sergeant
G-Sergeant
Posts: 45
Joined: Sat Mar 06, 2004 9:41 am
Location: Eastern Penn.

M 151 A frame assemblies

Post by Stanley Steamer » Mon Oct 13, 2014 11:25 am

I have three pair of A frame assemblies which are take outs from M-151Jeeps cut up prior to removal from a military base. All are therefore takeout assemblies. (All include Drums, Brake Shoes, and all Brake parts) Vehicle mileage is unknown but may be as low as 15 to 25 miles total. These have been in protective storage for about 20 yrs.
It is unknown as to which vehicle and position these were removed i.e. from front or rear, or the jeep model. (A1. A2, etc.).
Asking $100 per assembly or $175 per pair. You can pick up in Easton, PA, or I will ship banded to a skid by common carrier prepaid at your expense.
Set #1 has pivot bolts removed and the drive shafts burned through at roughly mid length. (Sliding spine assemblies missing) (Includes Drums, Brake Shoes, all Brake parts)
Set #2 has pivot bolts removed. (Drive shafts & U joints in place.)
Set #3 has pivot bolts in place with a part of the ears from the chassis still attached. One universal joint needle bearing cup missing. (Drive shafts & U joints in place.) One U joint @ wheel end stiff.
Loose drive shaft $35.00. One universal joint needle bearing cup missing. Can ship UPS in a cardboard carton prepaid at your expense.
All primary assemblies are uncut.
Stanley steamer
(M151 w/ Search light, M-416 Trlr (2), WC 52 w/ M101 A-1 Trlr, GPW(44),M100 Trlr, M-274 MULE, M-116 Trlr w/ 10 KW Genset, ex M-35A2C w/M105A2 Trlr.)


Post Reply

Return to “M151's For Sale”

Who is online

Users browsing this forum: No registered users and 39 guests