M151 U joints & Starters

1959 - 1978, M151, M151A1, M151A2 jeeps, NO EBAY or COMMERCIAL SALES.
Post Reply
tankjeepman
Sergeant Major of the Gee
Sergeant Major of the Gee
Posts: 268
Joined: Fri Apr 20, 2007 3:26 am
Location: Lucas, TX

M151 U joints & Starters

Post by tankjeepman » Fri Aug 23, 2013 7:11 am

I have a few U joints for propeller shaft, Parts kit 5703383 complete with U joint, nuts, washers, snap rings and U bolts. $20 + shipping.
U Joints for front or rear drive shaft, Parts kit 5702186 complete with U joint, cap screws, washers, snap rings. $25 + shipping
In order to make it worth while of going to the Post office, minimum order of 4 (unless you buy a starter). Will be shipped in the smallest flat rate box from 75002. You will be charged for only the actual shipping cost.
I have 4 takeout starters with drive assembly. They have all been tested. $50 each + shipping. You pay actual shipping in the smallest flat rate box they will fit.



Image

Image
Last edited by tankjeepman on Sun Oct 25, 2015 5:52 pm, edited 2 times in total.
45 Chevy G7107 SOLD
45 MB Completed SOLD
48 CJ 2A Parts or maybe restore?
M151A2 1973 Completed and being driven.
M151A1/A2 Conversion to A2 Future Project
M37B1 1962 Restoration in progress


desertfox
G-Private
G-Private
Posts: 3
Joined: Mon May 14, 2012 3:17 pm
Location:

Re: M151 U joints & Starters

Post by desertfox » Thu Sep 26, 2013 7:07 pm

Any (2) main driveshaft U-Joints part # 11660507 still for sale ? Tks. Erwin.

tankjeepman
Sergeant Major of the Gee
Sergeant Major of the Gee
Posts: 268
Joined: Fri Apr 20, 2007 3:26 am
Location: Lucas, TX

Re: M151 U joints & Starters

Post by tankjeepman » Wed Oct 02, 2013 6:51 pm

Yes, I have some left. It is the complete kit, not just the U joint. Due to the distance to the PO, minimum order is 4 to make it worth the while. Shipping for 4 is $6.
45 Chevy G7107 SOLD
45 MB Completed SOLD
48 CJ 2A Parts or maybe restore?
M151A2 1973 Completed and being driven.
M151A1/A2 Conversion to A2 Future Project
M37B1 1962 Restoration in progress

MaineMutt
G-Civilian
Posts: 1
Joined: Wed May 27, 2015 4:35 pm
Location:

Re: M151 U joints & Starters

Post by MaineMutt » Thu Sep 17, 2015 11:43 am

This is pretty far out but are any of these still available?

tankjeepman
Sergeant Major of the Gee
Sergeant Major of the Gee
Posts: 268
Joined: Fri Apr 20, 2007 3:26 am
Location: Lucas, TX

Re: M151 U joints & Starters

Post by tankjeepman » Thu Sep 24, 2015 5:29 pm

I would have to go and check. Which one or both do you need? Minimum is still 4 if I have that many.
45 Chevy G7107 SOLD
45 MB Completed SOLD
48 CJ 2A Parts or maybe restore?
M151A2 1973 Completed and being driven.
M151A1/A2 Conversion to A2 Future Project
M37B1 1962 Restoration in progress

tankjeepman
Sergeant Major of the Gee
Sergeant Major of the Gee
Posts: 268
Joined: Fri Apr 20, 2007 3:26 am
Location: Lucas, TX

Re: M151 U joints & Starters

Post by tankjeepman » Thu Oct 15, 2015 6:08 pm

I have a few U joints for the propeller shafts left. I have two starters left.
45 Chevy G7107 SOLD
45 MB Completed SOLD
48 CJ 2A Parts or maybe restore?
M151A2 1973 Completed and being driven.
M151A1/A2 Conversion to A2 Future Project
M37B1 1962 Restoration in progress

Venito
G-Corporal
G-Corporal
Posts: 20
Joined: Sat Dec 05, 2015 5:21 am
Location:

Re: M151 U joints & Starters

Post by Venito » Sat Mar 12, 2016 2:32 pm

I actually need only one propeller u joint but I can buy two. shipping to 30093

here is a pix of the my broken one, please tell me if it is call propeller u joint, m151A2,

is yours correct usgi mil specs. I've heard that civi or aftermarket are poor fit.

Image

vinny

tankjeepman
Sergeant Major of the Gee
Sergeant Major of the Gee
Posts: 268
Joined: Fri Apr 20, 2007 3:26 am
Location: Lucas, TX

Re: M151 U joints & Starters

Post by tankjeepman » Wed Mar 16, 2016 6:24 pm

Yes, it is a propeller shaft. Mine are mil spec as I use them on my vehicles. I will have to look and see if I have any left. Did the U joint come apart or did you disassemble it as show in the pic? If it came apart you need to check and see if the yoke is still usable. You need to replace both U joints on that shaft. You also need to check your other half shafts and see what kinda of shape they are in.
45 Chevy G7107 SOLD
45 MB Completed SOLD
48 CJ 2A Parts or maybe restore?
M151A2 1973 Completed and being driven.
M151A1/A2 Conversion to A2 Future Project
M37B1 1962 Restoration in progress


Post Reply

Return to “M151's For Sale”

Who is online

Users browsing this forum: No registered users and 34 guests