Page 1 of 1

Air Filter Replacement for the Mule

Posted: Sat Oct 24, 2015 3:12 am
by muleman7
I found that the Purolator A25306 will better fit the A1,2,3,4 and 5 Mule Canister with 1 modification. I punched a 1-7/8 inch hole in the bottom of the filter and it sits flat and secure on the bottom of the canister and the rubber wraps up on the protrusion creating a tight seal. Very difficult to get a good hole using scissors or a razor knife.

Tubing OD 2-1/8 inch

Image

Tubing ID 1-7/8 inch

Image

Edge Ground to create the cutting surface

Image

Punching the bottom hole

Image

The bottom hole punched

Image

Air Filter in the Canister

Image

Side view of the installed Air Filter

Image

Crossover Numbers

Image

Pic of the Air Cleaner Decal

Image

Re: Air Filter Replacement for the Mule

Posted: Sun Aug 26, 2018 12:36 pm
by captndavie
Just a heads up. The Wix number printed on the Purolator box is wrong.

Wix 42384 is the correct number for that brand.