Stoplights converted to LED
- Paul FitzGerald
- G-Brigadier General
- Posts: 2031
- Joined: Thu Dec 19, 2002 3:50 pm
- Location: Hercules CA
Re: Stoplights converted to LED
Kris
If you are talking about the ones in the grill the answer is yes I have done them in 6 or 12 Volt LED.
I have also converted the Fender B.O. 6 volt to 12 Volt(non led conversion).
Cheers
Paul
If you are talking about the ones in the grill the answer is yes I have done them in 6 or 12 Volt LED.
I have also converted the Fender B.O. 6 volt to 12 Volt(non led conversion).
Cheers
Paul
Veteran Tonkin Gulf DDR-874 IC3
GPW#10809 USA #2066524 NellyBelle
GPW#109945 USA #20371664 TinkerBelle
GPW#214852 USA #20546044 Rustie-Odograph jeep
9/43 MBT #37689 USA#0240682
MVCC and MVPA #22574
GPW#10809 USA #2066524 NellyBelle
GPW#109945 USA #20371664 TinkerBelle
GPW#214852 USA #20546044 Rustie-Odograph jeep
9/43 MBT #37689 USA#0240682
MVCC and MVPA #22574
- lt.luke
- G-General
- Posts: 9899
- Joined: Fri May 09, 2003 7:56 am
- Location: Oklahoma
- Contact:
Re: Stoplights converted to LED
Pauly,
I'm exploring options for a trailer I recently acquired. If I have you do a set of bulbs in 12v, will they function on a 6v system as well?
What I'm trying to do is be able to operate the trailer on my jeep (6v?) and pull it with my modern vehicle (12v).
I'm exploring options for a trailer I recently acquired. If I have you do a set of bulbs in 12v, will they function on a 6v system as well?
What I'm trying to do is be able to operate the trailer on my jeep (6v?) and pull it with my modern vehicle (12v).
Luke Sparks
MAJ (R), USA
GPW 12078 http://g503.com/forums/viewtopic.php?f=95&t=102532
https://www.homesteadersfinest.com/
MAJ (R), USA
GPW 12078 http://g503.com/forums/viewtopic.php?f=95&t=102532
https://www.homesteadersfinest.com/
- Paul FitzGerald
- G-Brigadier General
- Posts: 2031
- Joined: Thu Dec 19, 2002 3:50 pm
- Location: Hercules CA
Re: Stoplights converted to LED
Luke
PM sent.
PM sent.
Veteran Tonkin Gulf DDR-874 IC3
GPW#10809 USA #2066524 NellyBelle
GPW#109945 USA #20371664 TinkerBelle
GPW#214852 USA #20546044 Rustie-Odograph jeep
9/43 MBT #37689 USA#0240682
MVCC and MVPA #22574
GPW#10809 USA #2066524 NellyBelle
GPW#109945 USA #20371664 TinkerBelle
GPW#214852 USA #20546044 Rustie-Odograph jeep
9/43 MBT #37689 USA#0240682
MVCC and MVPA #22574
- Pat Walker
- G-Colonel
- Posts: 1654
- Joined: Fri Dec 13, 2002 2:50 pm
- Location: Lincoln, CA
- Contact:
Re: Stoplights converted to LED
Hi Paul,
I liked your idea. I took some burned out Tailight bulb and ordered 6V Led. took apart and soldered in. This is a mandatory upgrade to a converto dump. My trailer was blowing bulbs so fast due to no suspension.
I liked your idea. I took some burned out Tailight bulb and ordered 6V Led. took apart and soldered in. This is a mandatory upgrade to a converto dump. My trailer was blowing bulbs so fast due to no suspension.
42 GPW 82603 Matching serial Numbers
43 MB jeep salad
45 MB
45 MB
43 Bantam
45 Bantam
M101 canadian
Converto Dump
to many projects so little time
http://www.tacticalblunder.com/g503/sho ... &ppuser=62
43 MB jeep salad
45 MB
45 MB
43 Bantam
45 Bantam
M101 canadian
Converto Dump
to many projects so little time
http://www.tacticalblunder.com/g503/sho ... &ppuser=62
-
- G-Lieutenant General
- Posts: 6319
- Joined: Thu Mar 09, 2006 10:34 am
- Location:
Re: Stoplights converted to LED
I met Paul at Tower Park a couple weeks ago and saw his display of these lamps, they are very bright! The board is more than just a few LED's and a resistor or two. It's got it's own voltage regulator and a zener diode to maintain the brightness over a range of voltages, a very well thought out circuit design. It's not a simple bulb swap that he does. From what I saw, the LED's are mounted on a board inside the lamp housing that arranges the running lights around the edge and the brake lamp in the center. Much better light distribution than just soldering in a LED replacement bulb! One would be hard pressed to buy the components and make them for what he's getting for them!
43 Ford GPW 92098
53 Dunbar Kapple M100
Sold: 61 CJ-5, 41 T207 WC-1 Dodge closed cab pickup
MVPA #8266
USMC Tanker (1811, 1812), 85-93
ASE Automotive Master tech, former Chrysler-Jeep Level 4 Mastertech, CA state EA smog license
53 Dunbar Kapple M100
Sold: 61 CJ-5, 41 T207 WC-1 Dodge closed cab pickup
MVPA #8266
USMC Tanker (1811, 1812), 85-93
ASE Automotive Master tech, former Chrysler-Jeep Level 4 Mastertech, CA state EA smog license
- Paul FitzGerald
- G-Brigadier General
- Posts: 2031
- Joined: Thu Dec 19, 2002 3:50 pm
- Location: Hercules CA
Re: Stoplights converted to LED
Thanks Marty.
Actually the three in the Center are the running light and the outside ones are the brake light.
I'll be at or near table H1-H6 for the national.
Drop by and say Hi if you get a chance.
Cheers
Paul
Actually the three in the Center are the running light and the outside ones are the brake light.
I'll be at or near table H1-H6 for the national.
Drop by and say Hi if you get a chance.
Cheers
Paul
Veteran Tonkin Gulf DDR-874 IC3
GPW#10809 USA #2066524 NellyBelle
GPW#109945 USA #20371664 TinkerBelle
GPW#214852 USA #20546044 Rustie-Odograph jeep
9/43 MBT #37689 USA#0240682
MVCC and MVPA #22574
GPW#10809 USA #2066524 NellyBelle
GPW#109945 USA #20371664 TinkerBelle
GPW#214852 USA #20546044 Rustie-Odograph jeep
9/43 MBT #37689 USA#0240682
MVCC and MVPA #22574
- tamnalan
- G-Lieutenant General
- Posts: 6310
- Joined: Sat Feb 02, 2008 9:58 am
- Location: SW Oregon
- Contact:
Re: Stoplights converted to LED
Go get 'em Paul!
You going to do the Route 66 trip?
You going to do the Route 66 trip?
Alan W. Johnson
_______________
MB, 201453, "Lt Bob"
MB, 1942, not stock
M-100, Sep 1951
MB-TD, Mar 2012
Ford 91C, 1939
_______________
MB, 201453, "Lt Bob"
MB, 1942, not stock
M-100, Sep 1951
MB-TD, Mar 2012
Ford 91C, 1939
- Pat Walker
- G-Colonel
- Posts: 1654
- Joined: Fri Dec 13, 2002 2:50 pm
- Location: Lincoln, CA
- Contact:
Re: Stoplights converted to LED
Hey Paul, I noticed for some reason all of my styles of led conversions. When plugging a trailer in the lights fail to work. Unplug the trailer and they are back on. Swap the bulb to stock and everything is back to normal with trailers. Have you had this problem?
42 GPW 82603 Matching serial Numbers
43 MB jeep salad
45 MB
45 MB
43 Bantam
45 Bantam
M101 canadian
Converto Dump
to many projects so little time
http://www.tacticalblunder.com/g503/sho ... &ppuser=62
43 MB jeep salad
45 MB
45 MB
43 Bantam
45 Bantam
M101 canadian
Converto Dump
to many projects so little time
http://www.tacticalblunder.com/g503/sho ... &ppuser=62
- Paul FitzGerald
- G-Brigadier General
- Posts: 2031
- Joined: Thu Dec 19, 2002 3:50 pm
- Location: Hercules CA
Re: Stoplights converted to LED
Pat
No I haven't had that problem with the ones I make. Ya got to remember that LED'S are polarity sensitive, whereas a regular bulb doesn't care what polarity is used. And a good ground is a must. Just make sure they are set up for NEG ground. I'll be in Petaluma KOA at space 216 in April. Drop by and say Hi or PM me and we'll make something work in your application.
Cheers
Paul
No I haven't had that problem with the ones I make. Ya got to remember that LED'S are polarity sensitive, whereas a regular bulb doesn't care what polarity is used. And a good ground is a must. Just make sure they are set up for NEG ground. I'll be in Petaluma KOA at space 216 in April. Drop by and say Hi or PM me and we'll make something work in your application.
Cheers
Paul
Veteran Tonkin Gulf DDR-874 IC3
GPW#10809 USA #2066524 NellyBelle
GPW#109945 USA #20371664 TinkerBelle
GPW#214852 USA #20546044 Rustie-Odograph jeep
9/43 MBT #37689 USA#0240682
MVCC and MVPA #22574
GPW#10809 USA #2066524 NellyBelle
GPW#109945 USA #20371664 TinkerBelle
GPW#214852 USA #20546044 Rustie-Odograph jeep
9/43 MBT #37689 USA#0240682
MVCC and MVPA #22574
-
- G-Second Lieutenant
- Posts: 532
- Joined: Wed Mar 28, 2018 4:22 pm
- Location: USA - East Tennessee
Re: Stoplights converted to LED
Looks like it has been a while since anyone has posted on this thread, but I would certainly be interested in 12v LED bulbs that will fit in the stock light housing.
Hoping someone can tell me if these are still available, and if so how to purchase some of the bulbs?
Hoping someone can tell me if these are still available, and if so how to purchase some of the bulbs?
A.C.Fults
East Tennessee
Shade Tree Mechanic more than 50 years.
None of us are as smart as we pretend to be.
East Tennessee
Shade Tree Mechanic more than 50 years.
None of us are as smart as we pretend to be.
-
- G-Lieutenant Colonel
- Posts: 1098
- Joined: Sun Jun 20, 2010 5:04 am
- Location: Charles Town, WV
- Contact:
Re: Stoplights converted to LED
Send an email to message to Paul Fitzgerald. He's still making them and I love mine. Only bought them a few months ago.
Matt
Matt
1970 Kaiser Jeep DJ-5A Left Hand Drive
1945 Corps of Engineers Welder & Trailer
1943 G518 "Ben Hur" Trailer Steel Body
194* G518 "Ben Hur" Trailer Composite Body
http://g518parts.com/
1945 Corps of Engineers Welder & Trailer
1943 G518 "Ben Hur" Trailer Steel Body
194* G518 "Ben Hur" Trailer Composite Body
http://g518parts.com/
-
- G-Command Sergeant Major
- Posts: 225
- Joined: Sun Nov 09, 2008 4:59 am
- Location: Southeast Massachusetts
Re: Stoplights converted to LED
Hi Paul. Are you still offering this service?
1942 GPW 19714
1967 M416
1951 M100
MVPA 8836
1967 M416
1951 M100
MVPA 8836
-
- G-Corporal
- Posts: 25
- Joined: Sat May 09, 2020 3:40 pm
- Location: USA
Re: Stoplights converted to LED
Paul are your 6 volt led converted lights still available....thanks
Who is online
Users browsing this forum: No registered users and 49 guests