NEW Lock Washer A16408 available
-
- G-Second Lieutenant
- Posts: 520
- Joined: Sun Feb 08, 2004 5:41 am
- Location: Birmingham, Alabama
NEW Lock Washer A16408 available
I have made up a small batch of NEW Lock Washer A16408. They are $5.00 each with free shipping to the lower 48. These are laser cut, accurate to 0.001” and are exactly like the original loaned to me by G-503 member Warren Duchesne (Thanks Warren). They are 100% accurate copies, and come with a 100% money back guarantee. If you don’t like it, (for any reason), return it for a full refund. I accept Paypal under my email address of Industele@aol.com . If you have any question, please send to this email address rather than tying up the board’s band width. Thanks, Tom Campbell
-
- G-Colonel
- Posts: 1769
- Joined: Sun Dec 22, 2002 4:47 pm
- Location: Monroe , La
Re: NEW Lock Washer A16408 available
These are great , I have used a couple, perfect in every way . If you own or ever plan to do a handcart restoration get a pair or two of these , the tab on the ID is usually broke off on most originals . Warren Duchesne
-
- G-Second Lieutenant
- Posts: 520
- Joined: Sun Feb 08, 2004 5:41 am
- Location: Birmingham, Alabama
Re: NEW Lock Washer A16408 available
A lot of the tabs are broken off, because the spider gear doesn't line up with the axle pin, so they cut off the tab - making it usesless. I noiiced that the slot was cut in such a manner that you could flip the washer over and gain or loose (depending on which way you flipped the washer) 15 degrees. The slots are cut at 30 degree angles, but the tab will hold all the taps in that one place. if your's is sstill out of line, flip the washer over so it uses the teeth in another direction - which makes a 15 degree change. NO NEED to cut off the tab. Tom Campbell
- Johan WILLAERT
- G-Colonel
- Posts: 1672
- Joined: Sat Feb 14, 2004 2:50 am
- Location: Belgium
- Contact:
Re: NEW Lock Washer A16408 available
Would like a couple (3 sets)
Would you send these to Europe? Suppos they can go in a small letter envelop?
Please let me know
info@theliberator.be
Thanks,
Johan
Would you send these to Europe? Suppos they can go in a small letter envelop?
Please let me know
info@theliberator.be
Thanks,
Johan
MVPA#14204
Huffman D50546 (1942)
Westfield Columbia MG138969 & MG140418 (1943)
HD 42WLA31854 (1943)
Ford GPW272xxx (1945)
Bantam T3 56433(Est) (1945)
John Wood M3A4 17564 (1943)
Johnston Lawn Mower Co RL35-A 1255 (1944)
BSA Mark V* T136102 (1944)
The Liberator
Huffman D50546 (1942)
Westfield Columbia MG138969 & MG140418 (1943)
HD 42WLA31854 (1943)
Ford GPW272xxx (1945)
Bantam T3 56433(Est) (1945)
John Wood M3A4 17564 (1943)
Johnston Lawn Mower Co RL35-A 1255 (1944)
BSA Mark V* T136102 (1944)
The Liberator
-
- G-Second Lieutenant
- Posts: 520
- Joined: Sun Feb 08, 2004 5:41 am
- Location: Birmingham, Alabama
Re: NEW Lock Washer A16408 available
Johan, the US Post Office want $13.90 US to ship a 2 ounce "package" to Belgium. They consider an envelope with hard items as a package. Contact me directly at Industele@aol.com and let's see if we can't work out some alternate means. Tom Campbell
- Johan WILLAERT
- G-Colonel
- Posts: 1672
- Joined: Sat Feb 14, 2004 2:50 am
- Location: Belgium
- Contact:
Re: NEW Lock Washer A16408 available
Email sent! ThanksTom Campbell wrote:Johan, the US Post Office want $13.90 US to ship a 2 ounce "package" to Belgium. They consider an envelope with hard items as a package. Contact me directly at Industele@aol.com and let's see if we can't work out some alternate means. Tom Campbell
MVPA#14204
Huffman D50546 (1942)
Westfield Columbia MG138969 & MG140418 (1943)
HD 42WLA31854 (1943)
Ford GPW272xxx (1945)
Bantam T3 56433(Est) (1945)
John Wood M3A4 17564 (1943)
Johnston Lawn Mower Co RL35-A 1255 (1944)
BSA Mark V* T136102 (1944)
The Liberator
Huffman D50546 (1942)
Westfield Columbia MG138969 & MG140418 (1943)
HD 42WLA31854 (1943)
Ford GPW272xxx (1945)
Bantam T3 56433(Est) (1945)
John Wood M3A4 17564 (1943)
Johnston Lawn Mower Co RL35-A 1255 (1944)
BSA Mark V* T136102 (1944)
The Liberator
-
- G-Second Lieutenant
- Posts: 520
- Joined: Sun Feb 08, 2004 5:41 am
- Location: Birmingham, Alabama
Re: NEW Lock Washer A16408 available
Still have some of the washers available. Tom C
- TiredIron
- G-Sergeant Major
- Posts: 199
- Joined: Wed May 28, 2003 12:53 pm
- Location:
Re: NEW Lock Washer A16408 available
I'll take three....Paypal sent.
Jim Walters
"Tirediron"
Jim Walters
"Tirediron"
"There is NO such thing as Overkill"
-
- G-Second Lieutenant
- Posts: 520
- Joined: Sun Feb 08, 2004 5:41 am
- Location: Birmingham, Alabama
Re: NEW Lock Washer A16408 available
Jim, your three washers were put in the mail on Friday 6/24. You should have them by mid week. Tom
-
- G-Command Sergeant Major
- Posts: 245
- Joined: Wed Oct 14, 2009 5:41 pm
- Location: McCall,Idaho
Re: NEW Lock Washer A16408 available
WOW,
Thanks, Tom. Got the washers in the mail yesterday-- they look perfect! I am glad I decided to get a pair--these should sell out REAL fast.
Jim
Thanks, Tom. Got the washers in the mail yesterday-- they look perfect! I am glad I decided to get a pair--these should sell out REAL fast.
Jim
- retro-roco
- G-Brigadier General
- Posts: 2494
- Joined: Thu Mar 27, 2003 10:54 am
- Location: Bloomington, IL, USA
Re: NEW Lock Washer A16408 available
Tom,
Do you still have lock washers available? Don't have my cart yet, just checking at this point.
Thanks!
Do you still have lock washers available? Don't have my cart yet, just checking at this point.
Thanks!
Kirk Gustafson
359th Infantry Regt. 90th Div. WWII HRS
1942 Chevy G506 1-1/2 ton 4x4 Cargo
1943 Ben Hur water trailer
359th Infantry Regt. 90th Div. WWII HRS
1942 Chevy G506 1-1/2 ton 4x4 Cargo
1943 Ben Hur water trailer
-
- G-Second Lieutenant
- Posts: 520
- Joined: Sun Feb 08, 2004 5:41 am
- Location: Birmingham, Alabama
Re: NEW Lock Washer A16408 available
Yes, I do still have a few of the washers. Same cost and payment options as listed above. Thanks, Tom Campbell
-
- G-Sergeant First Class
- Posts: 79
- Joined: Mon Jun 16, 2008 3:54 am
- Location: Italy NW
Re: NEW Lock Washer A16408 available
Hello Tom, I know I'm 5 years late but.... do You still have in stock some washers? Thank You
-
- G-Second Lieutenant
- Posts: 520
- Joined: Sun Feb 08, 2004 5:41 am
- Location: Birmingham, Alabama
Re: NEW Lock Washer A16408 available
Yes, I still have a few. They are SLOW movers. Tom Campbell
-
- G-Sergeant First Class
- Posts: 79
- Joined: Mon Jun 16, 2008 3:54 am
- Location: Italy NW
Re: NEW Lock Washer A16408 available
Thank You very much for the prompt reply. I need 3. Please, just tell me the shipping cost to Italy and confirm Your address for paypal payment. I'll send You my shipping address by pm. Thanks.
Who is online
Users browsing this forum: No registered users and 31 guests