I have a PE-95G. It is missing all of the side covers and the toolbox/electrical panel cover as well as the automatic choke mounted in the exhaust (and that section of the exhaust). If a hand crank, the round rods between the vertical frames and the top tool box/tray, the small toolbox, battery tray or a full length gas tank or for that matter the sediment bowl or gas cap are available, I would be interested in them too. I could also use about 10 of the twist locks for the covers. I'm in the 26501 zipcode. Let me know if anyone is interested in selling any or all of these parts.
Thanks,
Howard
Wanted PE-95G side and control covers and Automatic Choke
-
- G-Private
- Posts: 3
- Joined: Thu Mar 06, 2008 5:51 pm
- Location: Morgantown, West Virginia
Wanted PE-95G side and control covers and Automatic Choke
Last edited by wvuengr04 on Sat Jun 25, 2016 7:26 pm, edited 1 time in total.
-
- G-First Lieutenant
- Posts: 627
- Joined: Mon May 05, 2014 9:10 am
- Location: Beautiful Pennsylvania
Re: Wanted PE-95G side and control covers and Automatic Chok
Hello Howard.
PM sent.
PM sent.
GPWs 196622 & 196623
GPs 14351 & 16625
Slat Grill 118247
Convertos 0567349 & 0877894
Daughter - 10/23/2012
Son - 01/02/2018
Wife - Top Secret
GPs 14351 & 16625
Slat Grill 118247
Convertos 0567349 & 0877894
Daughter - 10/23/2012
Son - 01/02/2018
Wife - Top Secret
-
- G-Private
- Posts: 3
- Joined: Thu Mar 06, 2008 5:51 pm
- Location: Morgantown, West Virginia
Re: Wanted PE-95G side and control covers and Automatic Chok
I have committed to buy everything but covers from TwoCar.
I have tried a couple of routes on the covers and the electrical box lid. One fellow has been a month and a half, the other only a week. The second fellow doesn't think he has the electric box lid. (Specifically the 95G lid which has the spring loaded catch on it.)
So I'm still looking for the side covers and or the top tray with the 95G lid.
Thanks,
Howard
I have tried a couple of routes on the covers and the electrical box lid. One fellow has been a month and a half, the other only a week. The second fellow doesn't think he has the electric box lid. (Specifically the 95G lid which has the spring loaded catch on it.)
So I'm still looking for the side covers and or the top tray with the 95G lid.
Thanks,
Howard
-
- G-Private
- Posts: 3
- Joined: Thu Mar 06, 2008 5:51 pm
- Location: Morgantown, West Virginia
Re: Wanted PE-95G side and control covers and Automatic Chok
I have all of the sheet metal for the generator.
The only thing left is an automatic choke. I have one in questionable condition. The choke operator itself is functional, the exhaust tube it mounts to is repaired, but isn't in great shape. (more cracks, needs faced off etc.) I could definitely use the linkage to the choke(Specifically the upper lever) and the choke itself. ( I have the standard mb choke shaft. I could modify it, but that will be more difficult.)
Thanks to Mike and Daryl for all of the other parts I needed.
Howard
The only thing left is an automatic choke. I have one in questionable condition. The choke operator itself is functional, the exhaust tube it mounts to is repaired, but isn't in great shape. (more cracks, needs faced off etc.) I could definitely use the linkage to the choke(Specifically the upper lever) and the choke itself. ( I have the standard mb choke shaft. I could modify it, but that will be more difficult.)
Thanks to Mike and Daryl for all of the other parts I needed.
Howard
Who is online
Users browsing this forum: No registered users and 5 guests