i managed to find a extended frontend hopefully compleet just want to ask if somebody can give me some advise in fitting it and what is exactly needed to do the job I have a m998 ambulance with a standerd brushbar I think i miss the extensions for putting it forward on the chassis Any info welcome
thanks gert
extended front end
Moderator: Kurt Lesser
-
- G-Corporal
- Posts: 16
- Joined: Wed Jul 24, 2013 2:12 am
- Location: colchester gb
extended front end
live life as it will be your last
- dilvoy
- G-Lieutenant General
- Posts: 6185
- Joined: Tue May 18, 2004 4:28 pm
- Location: San Francisco, Ca.
Re: extended front end
You need the extensions and front plate for a winch to be installed below the extended nose. Then there are different splash shield pieces too. The hood is different as the grille area is not in the hood, but in the extended nose. It was done to use a 20% larger radiator. Get a parts TM for the M1113/M1114 Humvee and all the parts will be shown.
George D. Paxinos
M998
M1123A2
M998
M1123A2
-
- G-Sergeant Major
- Posts: 173
- Joined: Wed Sep 15, 2004 1:43 am
- Location: London UK
Re: extended front end
There are a lot of detail pics about this conversion on G503, they should come up if you type ECV into the HMMWV section search but it will not work for me at the moment, searching "nose" seems to work OK ,there is a useful hood link below.There may be more than one type of frame extension bracket it seems.
viewtopic.php?f=63&t=120562&p=697942&hilit=nose#p697942
viewtopic.php?f=63&t=120562&p=697942&hilit=nose#p697942
-
- G-Corporal
- Posts: 16
- Joined: Wed Jul 24, 2013 2:12 am
- Location: colchester gb
Who is online
Users browsing this forum: No registered users and 41 guests